Compiling ScummVM/MinGW-w64

From ScummVM :: Wiki
< Compiling ScummVM
Revision as of 17:36, 16 October 2016 by Rootfather (talk | contribs) (Update the list of the needed libraries. With this libraries, I was able to compile the latest ScummVM codebase.)
Jump to navigation Jump to search
NOTE
This guide covers only the compilation under MinGW-w64 and MSYS2 (which is very different from MinGW and MSYS), and makes heavy use of the pacman package manager, which may not be available under other MinGW setups.

We do not support building in this way, but if you want to use it, instructions are below.

Our officially supported MinGW build instructions are at Compiling_ScummVM/MinGW.

Things needed

Setup MinGW-w64 and MSYS2

You can find MSYS2 and installation instructions on the [MSYS2 webpage].

Download and install the mingw-w64 compilation toolchain

In the MSYS2 terminal, type: 

	$> pacman -S mingw-w64-<env>-toolchain

where <env> is either x86_64 or i686, depending on your architecture (64-bit and 32-bit, respectively).

This command will fetch and install the packages needed for compiling, including (but not limited to) GCC 5.x, GDB, and libwinpthread-git.

Install make

ScummVM uses Makefiles to build the project. Makefiles are build configuration files that the compiler uses to compile, link and solve dependencies. "make" is the software that runs the Makefiles.

MSYS2 does not support make out of the box, but it has its own implementation. Install it by typing: 

	$> pacman -S make

Install the needed libraries

In order to compile properly, ScummVM needs you to have certain libraries installed. All the libraries in the list can be installed with similar commands: 

	$> pacman -S mingw-w64-<env>-<library>

where <env> is the environment as previously stated, and <library> is the name of the library, as stated in the list (e.g. pacman -S mingw-w64-x86_64-SDL):

  • SDL2. Mandatory. We recently switched to SDL2. SDL 1 is still available as fallback option.
  • nasm. Optional, for faster compile of scalers.
  • flac. Optional, for FLAC support.
  • libjpeg-turbo. Optional, for JPEG support. Required for Groovie 2, Starship Titanic and Wintermute.
  • libogg and libvorbis. Optional, for OGG support.
  • libmad. Optional, for MP3 support.
  • libmpeg2. Optional, for MPEG2 cutscene support.
  • zlib. Optional, for compressed saved games.
  • libtheora. Optional, for Broken Sword 2.5.
  • faad2. Optional, for AAC support.
  • libpng. Optional, for PNG support.
  • freetype. Optional, for TTF support.
  • fluidsynth. Optional, for soundfont MIDI support.
  • curl and SDL2_net. Optional, for cloud integration support.
  • winsparkle. Optional, for application updates via the WinSparkle framework.

Let's get compiling!

Finally, we are ready to compile the project! To do that, just open a MinGW-w64 shell (not the MSYS2 shell), navigate to the source folder where you have cloned scummvm.git, and type the following commands: 

	$> ./configure # Executes a bash script that helps you configure.
	$> make # Executes the make program, which triggers the compilation.

If everything went well, you should have a big executable in the compilation folder, named scummvm.exe. The size of the executable comes from the debug symbols embedded in the file, so you can run the following command to shrink it: 

	$> strip scummvm.exe

Ready to go!

OK this should be all of it (hopefully), so you should be good to go.

Common Issues

  • If the executable compiles correctly, but you get a "somelibrary.dll missing" error when executing it, you just need to add the following path to your PATH variable: <installdir>/msys<env>/mingw64/bin/
  • If the configure script gives an error about using msys mode, please make sure you are running the mingw-w64 win32 shell or the mingw-w64 win64 shell, and not the msys2 shell from the MSYS2 package, when building ScummVM.

DLLs required for running ScummVM on a "non-MSYS2" machine

If you want to run the ScummVM binary you just compiled on an (other) Windows machine that doesn't have mingw-w64/MSYS2 installed, you need to copy a few .dll files from the folder /your-msys2-folder/mingw64/bin (for x64 builds) or ../mingw32/bin (for x86) to the same folder as your scummvm.exe.

The following list assumes that you are building ScummVM with default settings and all engines enabled, so chances that this list will suit your needs are pretty high.

  • libbz2-1.dll
  • libfaad-2.dll
  • libFLAC-8.dll
  • libfluidsynth-1.dll
  • libfreetype-6.dll
  • libgcc_s_seh-1.dll
  • libglib-2.0-0.dll
  • libgraphite2.dll
  • libharfbuzz-0.dll
  • libiconv-2.dll
  • libintl-8.dll
  • libjpeg-8.dll
  • libmad-0.dll
  • libmpeg2-0.dll
  • libogg-0.dll
  • libpcre-1.dll
  • libpng16-16.dll
  • libportaudio-2.dll
  • libsndfile-1.dll
  • libspeex-1.dll
  • libstdc++-6.dll
  • libtheoradec-1.dll
  • libvorbis-0.dll
  • libvorbisenc-2.dll
  • libvorbisfile-3.dll
  • libwinpthread-1.dll
  • SDL.dll/SDL2.dll (depends on the SDL version you used for compilation. Default is SDL2.dll)
  • zlib1.dll

Please note that compiling ScummVM with other options (e.g. "--enable-text-console") may require various other .dll files that are currently not in this list. This list will be constantly updated in the future.

Usually, ScummVM will name the .dll file that is missing, but in some cases, all you get is a quite unspecific error code "0xc000007b". When you get this error code, please double-check if you copied all necessary .dll files.

Retrieved from "https://wiki.scummvm.org/index.php?title=Compiling_ScummVM/MinGW-w64&oldid=23416"