Difference between revisions of "Compiling ScummVM/MinGW"

Compiling ScummVM/MinGW (view source)

Revision as of 08:47, 23 November 2018

3,915 bytes added , 08:47, 23 November 2018

→‎SDL: Add note about needing to edit sdl-config / pkg-config outputs for MinGW toolchains

Digitall

TrustedUser

574

edits

@@ Line 18: / Line 18: @@
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/gmp/gmp-5.0.1-1/gmp-5.0.1-1-mingw32-dev.tar.lzma/download gmp dev]
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libgomp-4.6.2-1-mingw32-dll-1.tar.lzma/download gmp dll]
-*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libgomp-4.6.2-1-mingw32-dll-1.tar.lzma/download gomp]
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/gettext/gettext-0.17-1/libintl-0.17-1-mingw32-dll-8.tar.lzma/download iconv]
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/libiconv/libiconv-1.13.1-1/libiconv-1.13.1-1-mingw32-dev.tar.lzma/download intl dev]
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/libiconv/libiconv-1.13.1-1/libiconv-1.13.1-1-mingw32-dll-2.tar.lzma/download intl dll]
-*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mingw-rt/mingwrt-3.18/mingwrt-3.18-mingw32-dev.tar.gz/download mingw-runtime dev]
+*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gmp/gmp-5.0.1-1/libgmp-5.0.1-1-mingw32-dll-10.tar.lzma/download libgmp]
-*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mingw-rt/mingwrt-3.18/mingwrt-3.18-mingw32-dll.tar.gz/download mingw-runtime  dll]
+*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mingwrt/mingwrt-3.18/mingwrt-3.18-mingw32-dev.tar.gz/download mingw-runtime dev]
+*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mingwrt/mingwrt-3.18/mingwrt-3.18-mingw32-dll.tar.gz/download mingw-runtime  dll]
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/mpc/mpc-0.8.1-1/mpc-0.8.1-1-mingw32-dev.tar.lzma/download mpc dev]
 *[http://sourceforge.net/projects/mingw/files/MinGW/Base/mpc/mpc-0.8.1-1/libmpc-0.8.1-1-mingw32-dll-2.tar.lzma/download mpc dll]
@@ Line 55: / Line 55: @@
 * [ftp://ftp.mars.org/pub/mpeg/ libmad] Optional, for MP3 support
 ** You need the latest libmad source code.
+* [http://libmpeg2.sourceforge.net/ libmpeg2] Optional, for MPEG2 cutscene support.
+** You need the latest libmpeg2 source code, currently v0.5.1.
 * [http://www.zlib.net/ zlib]. Optional, for compressed saved games.
@@ Line 71: / Line 74: @@
 * [http://download.savannah.gnu.org/releases/freetype/ freetype]. Optional, for TTF support.
 ** You need the latest freetype source code.
+* [http://sourceforge.net/apps/trac/fluidsynth fluidsynth]. Optional, for soundfont MIDI support.
+** You need at least v1.0.9. Newer versions than this should work, but require GTK's glib and CMAKE to build.
 === Precompiled libraries ===
@@ Line 76: / Line 82: @@
 All you need to do is:
 * Download the precompiled libraries and the [http://www.libsdl.org/release/SDL-1.2.15-win32.zip latest SDL runtime library] - latest version is 1.2.15 at the time this was written, you can find the latest version [http://www.libsdl.org/download-1.2.php here]. Precompiled libraries:
-** [http://sourceforge.net/projects/scummvm/files/build/scummvm-required-libs-mingw.zip/download Precompiled libraries]
+** [http://www.scummvm.org/frs/build/scummvm-required-libs-mingw.zip Precompiled libraries]
 == Installing MinGW and MSYS ==
@@ Line 142: / Line 148: @@
 === SDL ===
-SDL is already compiled and needs no further changes, so we can skip the compilation step for it
+SDL is already provided in compiled development archives, so we can skip the compilation step for it
+This can be found from [https://www.libsdl.org here], going to the latest stable download and choosing the Development Libraries - MinGW 32/64-bit option.
+After extracting the contents of this archive in a folder, copy all the files in the 'include/SDL' folder to MinGW's include folder, copy all the files in the 'lib' folder to MinGW's lib folder and copy all the files in the 'bin' folder to MinGW's bin folder.
-After extracting the contents of the SDL archive in a folder, copy all the files in the 'include/SDL' folder to MinGW's include folder, copy all the files in the 'lib' folder to MinGW's lib folder and copy all the files in the 'bin' folder to MinGW's bin folder.
+It may be necessary to modify the bin/sdl-config and lib/pkgconfig/sdl2.pc files which are just text. These files provide the compiler option information to ScummmVM and SDL2 is passing the -mwindows compiler option by default which will result in a valid executable, but with broken console / command-line output. These should be removed or replaced by -mconsole (though this will affect all SDL compiled binaries made by the MinGW toolchain). ScummVM's configure script should deal automatically with this issue in future as the upstream SDL project has indicated that removing this "forced" option is a WONTFIX issue.
+If you do wish to recompile SDL from source code, please note the following:
+* Check that the libSDL source file src/main/win32/version.rc contains the correct version. This was incorrectly listed as v1.2.14 for the v1.2.15 release, needed an additional patch.
+* Note the README [http://www.libsdl.org/extras/win32/mingw32/README.txt here], especially the need to include the DirectX development header and libraries from [http://www.libsdl.org/extras/win32/common/directx-devel.tar.gz here] to ensure that the "dsound" rather than the "waveout" / "winmm" fallback audio driver is used.
 === zlib ===
@@ Line 168: / Line 180: @@
 Unzip the libogg archive in a folder, open MSYS, go to the libogg folder and issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
   make
@@ Line 179: / Line 191: @@
 Unzip the libvorbis archive in a folder, open MSYS, go to the libvorbis folder and issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
   make
@@ Line 192: / Line 204: @@
 Then issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
+ make
+To install the library, type:
+ make install prefix=/mingw
+=== libmpeg2 ===
+Unzip the libmpeg2 archive into a folder. Open MSYS, go to the libmpeg2 folder.
+Then issue these commands to compile the library:
+ ./configure --disable-sdl --disable-shared --prefix=/mingw
   make
@@ Line 198: / Line 222: @@
   make install prefix=/mingw
+Note that if you are compiling x64 i.e. for a 64-bit target, then currently (v0.5.1), the following patch is needed:
+<syntaxhighlight lang="diff">
+--- libvo/video_out_dx.c.orig   2014-02-17 16:38:24.000000000 +0100
++++ libvo/video_out_dx.c        2014-02-17 16:39:34.000000000 +0100
+@@ -92,7 +92,7 @@
+     switch (message) {
+     case WM_WINDOWPOSCHANGED:
+-       instance = (dx_instance_t *) GetWindowLong (hwnd, GWL_USERDATA);
++       instance = (dx_instance_t *) GetWindowLongPtr (hwnd, GWLP_USERDATA);
+        /* update the window position and size */
+        point_window.x = 0;
+@@ -173,7 +173,7 @@
+     /* store a directx_instance pointer into the window local storage
+      * (for later use in event_handler).
+      * We need to use SetWindowLongPtr when it is available in mingw */
+-    SetWindowLong (instance->window, GWL_USERDATA, (LONG) instance);
++    SetWindowLongPtr (instance->window, GWLP_USERDATA, (LONG_PTR) instance);
+     ShowWindow (instance->window, SW_SHOW);
+</syntaxhighlight>
 === FLAC ===
@@ Line 203: / Line 249: @@
 Unzip the flac archive in a folder, open MSYS, go to the flac folder and issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
   make
@@ Line 209: / Line 255: @@
   make install prefix=/mingw
+=== FluidSynth ===
+We use fluidsynth 1.0.9, since later versions requires GTK.
+Unzip the fluidsynth archive in a folder, open MSYS, go to the fluidsynth folder and apply the following patch:
+<syntaxhighlight lang="diff">
+--- include/fluidsynth.h
++++ include/fluidsynth.h
+@@ -28,13 +28,7 @@
+ #endif
+ #if defined(WIN32)
+-#if defined(FLUIDSYNTH_DLL_EXPORTS)
+-#define FLUIDSYNTH_API __declspec(dllexport)
+-#elif defined(FLUIDSYNTH_NOT_A_DLL)
+-#define FLUIDSYNTH_API
+-#else
+-#define FLUIDSYNTH_API __declspec(dllimport)
+-#endif
++#define FLUIDSYNTH_API
+ #elif defined(MACOS9)
+ #define FLUIDSYNTH_API __declspec(export)
+</syntaxhighlight>
+Then issue these commands to compile the library:
+ ./configure --disable-shared --prefix=/mingw
+ make
+To install the library, type:
+ make install prefix=/mingw
 === libpng ===
@@ Line 214: / Line 293: @@
 Unzip the libpng archive in a folder, open MSYS, go to the libpng folder and issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
   make
@@ Line 225: / Line 304: @@
 Unzip the libtheora archive in a folder, open MSYS, go to the libtheora folder and issue these commands to compile the library:
-  ./configure --disable-shared --disable-examples
+  ./configure --disable-shared --disable-examples --prefix=/mingw
   make
@@ Line 236: / Line 315: @@
 Unzip the libfaad2 archive in a folder, open MSYS, go to the libfaad2 folder and apply the following patch:
-<syntax type="diff">
+<syntaxhighlight lang="diff">
 --- frontend/main.c
 +++ frontend/main.c
@@ Line 249: / Line 328: @@
   #include <time.h>
   #endif
-</syntax>
+</syntaxhighlight>
 Then issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
   make
@@ Line 263: / Line 342: @@
 Unzip the freetype archive in a folder, open MSYS, go to the freetype folder and issue these commands to compile the library:
-  ./configure --disable-shared
+  ./configure --disable-shared --prefix=/mingw
   make

Difference between revisions of "Compiling ScummVM/MinGW"

Compiling ScummVM/MinGW (view source)

Revision as of 08:47, 23 November 2018

Navigation menu

Search