== Compiling ScummVM with Visual Studio
2008/2010 under Windows ==
under Windows is not an awfully hard task , however there are some things that don't just work out of the box
== Things needed ==
=== Visual Studio
2010 or 2008 ===There exist several versions of Visual Studio 2010. A feature comparison can be found [http://msdn.microsoft.com/vstudio/products/compare/default.aspx here] You can obtain the free Express version of Visual C++ 2010 [ http:// msdn.microsoft.com/ vstudio/express/default.aspx here] Although Visual Studio 2010 or 2008 is preferred, older versions of Visual Studio may work so long as you have them updated to their latest Service Pack revisions. In fact, we suggest making sure that you always have the latest Service Packs and patches applied for these tool sets. In some cases, fixes were put into the free-to-download "Processor Pack" add-on for Visual C++. So, download the latest Service Pack and the latest Processor Pack for whatever version of Visual C++ you are using to make sure you won't run into compiler bugs that prevent the compilation of scummvm. === Precompiled libraries === To ease the whole process, a package of all the needed precompiled libraries has been created. All you need to do is: * Download the precompiled libraries and the [http://www.libsdl.org/release/SDL-1.2.12-win32.zip latest SDL runtime library] - latest version is 1.2.12 at the time this was written, you can find the latest version [http://www.libsdl.org/download-1.2.php here]. Mirrors for precompiled libraries: ** [http://robertmegone.com/scummvm/build/scummvm_vs_libs.zip Mirror 1] ** [http://rapidshare.com/files/302044697/scummvm_vs_libs.zip Mirror 2] (RapidShare) * Unzip the precompiled libraries archive maintaining directory structure * Run install.bat (Visual Studio 2005/2008 only) * You don't need to add the libraries to Visual Studio, as the installer automatically copies the necessary files in the appropriate directories of Visual Studio. Please note that this installer has only been tested with Visual Studio 2005 and 2008. If you get errors with earlier versions of Visual Studio, simply copy the directories ''bin'', ''lib'' and ''include'' inside the directory where Visual C++ is installed. If you're not sure how to do that, check the section "[[Compiling_ScummVM/Visual_Studio#Adding_all_libraries_to_Visual_Studio|Adding all libraries to Visual Studio]]" further on * Unzip sdl.dll from the SDL runtime in the same directory where the scummvm executable will be created (default is under dits\msvc9\scummvm_Release, substitute msvc9 for msvc8 if you're using Visual Studio 2005 and msvc7 if you're using Visual Studio 2003) * Skip to step "[[Compiling_ScummVM/Visual_Studio#Ready to compile ScummVM|Ready to compile ScummVM]]" === Libraries needed === * [http://www.libsdl.org/download-1.2.php SDL 1.2], file SDL-devel-1.2.XX-VC8.zip (where XX is the current release number) Latest stable version at the time of writing this: [http://www.libsdl.org/release/SDL-devel-1.2.14-VC8.zip 1.2.14] * [ftp://ftp.zytor.com/pub/nasm/releasebuilds/ NASM] Latest stable version at the time of writing this: [ftp://ftp.zytor.com/pub/nasm/releasebuilds/2.06rc12/win32/nasm-2.06rc12-win32.zip 2.06rc12] * [http://downloads.xiph.org/releases/ogg/ libogg] and [http://downloads.xiph.org/releases/vorbis/ libvorbis] for OGG support. Note that the libraries included in the "vorbis" package won't work. You need libogg and libvorbis, not vorbis. Latest stable versions at the time of writing this: [http://downloads.xiph.org/releases/ogg/libogg-1.1.4.zip 1.1.4] and [http://downloads.xiph.org/releases/vorbis/libvorbis-1.2.3.zip 1.2.3]. * [ftp://ftp.mars.org/pub/mpeg/ libmad] for MP3 support. Latest stable version at the time of writing this: [ftp://ftp.mars.org/pub/mpeg/libmad-0.15.1b.tar.gz 0.15.1b] * [http://sourceforge.net/project/showfiles.php?group_id=13478&package_id=12677 libFLAC] for FLAC support. Latest stable version at the time of writing this: [http://sourceforge.net/project/showfiles.php?group_id=13478&package_id=12677&release_id=539981 1.2.1] * [http://libmpeg2.sourceforge.net/downloads.html libmpeg2] for MPEG-2 support. Get the latest mpeg2dec release from this page, libmpeg2 is included there. Latest stable version at the time of writing this: [http://libmpeg2.sourceforge.net/files/libmpeg2-0.5.1.tar.gz 0.5.1] * [http://www.zlib.net/ zlib] You need the latest zlib source code. If you wish to compile ScummVM 0.8.0 or earlier with zlib support, you'll also need [http://www.winimage.com/zLibDll/crtdll.zip crtdll.lib]. Latest stable version at the time of writing this: [http://www.zlib.net/zlib123.zip 1.2.3] * [ftp://ftp.simplesystems.org/pub/libpng/png/src/ libpng] (for ScummVM tools) You need the latest libpng source code. Latest stable version at the time of writing this: [ftp://ftp.simplesystems.org/pub/libpng/png/src/libpng-1.2.36.tar.gz 1.2.36] == Building the libraries == Now, we need to compile the required libraries. Note that you'll need to build all libraries with the same configuration settings (debug or release). If you don't need a specific library, you can remove it from your build by going to Project->Properties, Configuration Properties->C/C++->Preprocessor and remove the "USE_XXX" directive for that library from there. For example, to remove OGG support, remove the USE_VORBIS directive. Also, make sure to disable the inclusion of default libraries in all libraries. You can do this from the project properties->Librarian->General and setting "Ignore all default libraries" to "Yes (/NODEFAULTLIB)" (special thanks to nolange for this tip). Finally, make sure that optimization is set to "Maximize speed" (or anything other than "Full optimization"), otherwise it will be impossible to build incremental debug builds later on (you'll get a warning saying "ignoring '/INCREMENTAL' due to '/LTCG' specification"). You can do this from the project properties->C/C++->Optimization, and set "Optimization" to "Maximize Speed (/O2)" === A note about VS2008/2005 === If you're building the libraries with VS2008/2005, you will get a lot of deprecation warnings. These are normal and nothing to worry about, they're just Microsoft's way of saying "This is a bad code practice. Use this instead". It's not easy to turn these off without several modifications to the code, so just ignore them. Read more here: http://msdn.microsoft.com/msdnmag/issues/05/05/SafeCandC/ http://www.gamedev.net/community/forums/topic.asp?topic_id=361433 http://blogs.msdn.com/oldnewthing/archive/2005/01/07/348437.aspx If you do wish to make them disappear, you need to include on top the main function of each library, before the includes, the following lines: #if (_MSC_VER >= 1400) /* VC8+ (VS2005) */ #pragma warning(disable : 4996) /* Disable all deprecation warnings */ #endif /* VC8+ (VS2005) */ === NASM === First of all, we need nasm. So unzip the nasm archive in a directory, copy "nasmw.exe" to "nasm.exe" (because some projects call one and others call the other) and include it in the executable path of VS. To do this, go to Tools->Options->Projects and solutions->VC++ directories. Select "Executable files" from the top right and include the directory where you unzipped nasm into. === SDL === SDL is already compiled and needs no further changes, so we can skip the compilation step for it. '''Note for x64''': You will need to compile SDL for x64 on your own (as of the time of this writing), to do so you will also need to install the [http://msdn.microsoft.com/en-us/directx/default.aspx DirectX SDK found here]. You will also need to apply this patch [http://robertmegone.com/scummvm/build/sdl.patch from here] (patch gladly taken from the SDL mailing list). After adding a new x64 configuration option in the project files, you may also need to remove "/MACHINE:I386" as additional linker command in Project->Properties, Configuration Properties->Linker->Command Line. === zlib === You'll need the zlib source package. After unzipping it, go into the projects directory in the zlib source and open the solution under projects\visualc6. Right click on the "zlib" project, and go to its properties. Then, go to Configuration Properties->C/C++->Code Generation and change the Runtime library from "Multi-Threaded DLL (/MD)" to "Multi-Threaded (/MT)" (if you don't do this step, you'll have issues compiling ScummVM later on). Then, compile the "zlib" project using the LIB release configuration. === libogg === Compile this first, as many other libraries need it. Go to the win32 directory and build the "libogg_static" solution of your MSVC version (which should be found in one of the sub-directories). The solution should feature working x86 (Win32) and x64 (x64) targets by default, so you can compile either of those depending on whether you decide to build an x86 or x64 ScummVM. === libvorbis === You will need to use the "vorbis_static" solution. It should feature working x86 (Win32) and x64 (x64) targets by default. '''Note''': When you do not include your ogg headers/libraries in your global MSVC path settings you will need to do the following: include the libogg include and library paths in VS. To do this, go to Tools->Options->Projects and solutions->VC++ directories and include the include directory of libogg as well as the directory with the compiled ogg library. You'll need vorbis, vorbisfile and also vorbisenc for ScummVM tools. === libmpeg2 === The VC6 solution files (inside the vc++ folder) need to be used for this library, but first they all need to be changed to DOS format, otherwise Visual Studio will complain that the project files are corrupted. Then, open file config.h inside the vc++ folder and comment out the following line, near the end of the file: #define restrict __restrict Open the solution and compile project "libmpeg2". After you compile it, go to its include directory, create a folder "mpeg2dec" in there and copy all files from the include folder in this subfolder. You will end up with 2 directories, "include" and "include\mpeg2dec" with the same files. This is needed, as ScummVM includes files from the "mpeg2dec" directory === libmad === Open and compile the "libmad" solution '''Note for x64:''' When you want to build a x64 library for libmad you will need to create your own x64 config for it. You can do so by easy conversion of the existing libmad solution files for x86. For Release mode you will also need to edit the preprocessor definitons via: Properties -> Configuration Properties -> C/C++ -> Preprocessor -> Preprocessor Definitions: there you will need to replace "FPM_INTEL" with "FPM_64BIT". You will also need to apply the following patch to mad.h: [http://robertmegone.com/scummvm/build/mad.patch mad.patch] === FLAC === Open its solution and compile the libFLAC_static project. By default, optimization for this library is set to "full" in release builds, which will prevent you from performing incremental debug builds later on, so make sure to set it to "Maximize speed" (or anything other than "Full optimization"), otherwise it will be impossible to build incremental debug builds later on. Check the introductory section for more information. Also, FLAC OGGs are not needed, so support for these can be dropped by going to the libFLAC_static project settings and removing the FLAC__HAS_OGG switch from C/C++->Preprocessor->Preprocessor Definitions. '''Note for x64''': After converting the Win32 target to x64 you will need to adapt some file settings. First of all you will need to disable all *.nasm files in the "libFLAC_static" project, this can be easily done by right clicking on them and selecting "Properties", now set "Excluded From Build" to "true". Next you will need to adapt the Preprocessor Definitions: First of all remove the following defintions: "FLAC__CPU_IA32", "FLAC__HAS_NASM" and "FLAC__USE_3DNOW", now also add "FLAC__NO_ASM". Last but not least you will need to apply the following patch file to "bitreader.c" of the "libFLAC_static" project: [http://robertmegone.com/scummvm/build/flac.patch flac.patch] === libpng === Open the solution under projects\visualc71. You also need zlib to compile this library, which must be placed in a folder named "zlib" outside libpng's directory. You need to change the settings of zlib like you have done before (i.e. from "Multi-Threaded DLL (/MD)" to "Multi-Threaded (/MT)"). Check the zlib section for more information. == Adding all libraries to Visual Studio == There are two ways of adding the libraries to Visual Studio. You can either copy all the header and library files inside the appropriate directories of Visual C++ or tell Visual C++ where to look for them. <br><br> === First method: Copy the files inside VC++'s folders === The '''first method''' of adding the required libraries is to go to each individual compiled library and copy the header and library files. You'll need the following:<br><br> '''Libraries'''<br> '''libFLAC_static.lib''' - static build of libFLAC (from folder obj\release\lib where you unzipped libFLAC) '''libmad.lib''' - static build of libMAD (from folder msvc++\Release where you unzipped libmad) '''libmpeg2.lib''' - static build of libMPEG2 (from folder vc++\Release where you unzipped mpeg2dec) '''libpng.lib''' - static build of libpng (from folder projects\visualc71\Win32_LIB_Release where you unzipped libpng) '''ogg_static.lib''' - static build of libOGG (from folder win32\Static_Release where you unzipped libogg) '''sdl.lib''' - static build of SDL (from folder lib where you unzipped SDL) '''vorbisfile_static.lib''' - static build of vorbisfile (from folder win32\VorbisFile_Static_Release where you unzipped libvorbis) '''vorbis_static.lib''' - static build of libvorbis (from folder win32\Vorbis_Static_Release where you unzipped libvorbis) '''vorbisenc_static.lib''' - static build of libvorbis (from folder win32\Vorbisenc_Static_Release where you unzipped libvorbis) '''zlib.lib''' - static build of zlib (from folder projects\visualc6\Win32_LIB_Release where you unzipped zlib) Copy those inside VC's lib folder (e.g. C:\Program Files\Microsoft Visual Studio 8\VC\lib) <br><br> '''Header files'''<br> [TODO] Copy those inside VC's include folder (e.g. C:\Program Files\Microsoft Visual Studio 8\VC\include) <br><br> '''Executable files'''<br> '''nasmw. exe''' - from the NASM zip
Copy this as nasmw.exe AND as nasm. exe inside VC's bin folder (e.g. C:\Program Files\Microsoft Visual Studio 8\VC\bin) <br><br>
Second method: Tell VC++ where to look === The '''second method''' is to tell VC++ where to look for the required libraries and header files
Tools-> Options->Projects and solutions->VC++ directories.
In the executable files section, make sure that the path to nasm is included and that nasmw. exe in that folder has been copied to nasm.exe. Failure to do that will give you an error in VS (a custom building step has returned an error)
In the include files section, make sure that the include folders for libogg, libvorbis, libmad, zlib, mpeg2dec and SDL are in the list. If you need FLAC, include the FLAC include folder in the list too
In the library files section, make sure that the static libraries for vorbis, vorbisfile, libogg, zlib, mpeg2dec, libmad and SDL are included. If you're building 0.8.0 final or earlier, include the release folder of zlibdll too (in the zlib source folder, contrib\vstudio\vc8\x86\zlibdllrelease). If you need FLAC, include the FLAC libraries folder too
Finally, if you need to compile ScummVM with FLAC support, go to Configuration Properties->C/C++->Preprocessor and add "USE_FLAC" in the Preprocessor Definitions field. Also, go to linker->input and add " libflac_static.lib" in the Additional Dependencies field.
Enabling the console ==
Since information on doing this is not that easy to find, here's how to enable the console in the resulting ScummVM executable. The default project subsystem is " Windows" instead of "Console", which means that the console will not be shown.
To show the console, right- click on the "scummvm" project and go to Properties. There, go to Configuration Properties->Linker->System and change the "Subsystem" property from "Windows (/ SUBSYSTEM:WINDOWS)" to "''' Console (/SUBSYSTEM:CONSOLE)''' ". Then, go to Linker->Advanced and set the entry point to be " '''WinMainCRTStartup'''" (special thanks to [[User:Jubanka|Jubanka/ knakos]] for his tip on entrypoint).
== Ready to compile ScummVM ==
If you got all the libraries compiled, you 're ready to compile the latest version of ScummVM !
Open the solution file in dists\msvc9 (msvc8 for VS2005 and msvc7 for VS2003), select the "Release" configuration from the configuration manager pulldown menu and then go to Build->Build solution, or just press Control-F7 to compile it.
The ScummVM executable should be in the folder dists\msvc9\scummvm_Release as "scummvm.exe".
You'll need to copy sdl. dll from the SDL runtime archive ( or the latest devel archive) in the directory where scummvm.exe is