User Manual/Installing a game for use with ScummVM
|WORK IN PROGRESS, HELP NEEDED|
|If you want to contribute, send us a sample of text you'd write for the new manual, and we will consider adding you an account. You can work on the manual in the Wiki, but if you prefer, supplying us with HTML or TeX sources is fine, too (we will then translate them for the Wiki).
You can have a look at our TODO page for a list of tasks that need to be done.
- 1 Installing Games
- 2 General Notes
- 3 Games Specific instructions
- 3.1 LucasArts Games (SCUMM Engine)
- 3.2 Revolution Software Games
- 3.3 Adventure Soft Games
- 3.4 Other Games
For most games simply copy the files listed on the game datafiles page for your game from the floppy or CD to your hard drive.
For some games the files are packed and not directly accessible on the floppy or CD. In such a case you will need to run the original game installer and then copy the files from where they have been installed to the directory in which you want to install the game to play with ScummVM. For DOS games you can try to use DosBox to run the installer. For Windows games if you don't have Windows you can try Wine (or Darwine on Mac OS X).
Once the game files are on the hard drive, start ScummVM, click on Add Game (see also Adding a game) and then you are ready to play.
GP2X / GP2XWiz
iPhone / iPod Touch
To copy the game data files over to your device:
- On the iPhone/iPod install OpenSSH (if it is not already installed), using Cydia.
- Install an SFTP client (For Macs, Cyberduck is good. For Windows, FileZilla should do the trick). Then connect your SFTP client to your iPhone/iPod using the IP address the device shows in its network settings (Hit Settings, then Wi-Fi, then find the network you're connected to). The username is "root" and the password probably "alpine".
- Make a subdirectory on your phone under /var/mobile (or /var/root for firmware versions 1.1.2 and below), and upload the games there (don't place them anywhere else on the phone, as you'll be filling up the smaller system partition then). Here you can see exactly which files you need for which games.
- Make sure these files and directories have the right permissions set! You're uploading as root, all the files need to be readable by the 'mobile' user as well.
- When you've uploaded all the games you want, start up ScummVM and add the game(s) there (navigate to the same directory you uploaded them to).
Connect the device via USB and copy the games files to the device following guidelines from the General Instructions section.
Copy the games you want to play onto the MicroSD card on which you have installed ScummVM (see Installing ScummVM). The game files can be copied in any location, one game per folder. Then you just have to boot the DS with the MicroSD card and card reader inserted and run ScummVM.
To decrease the memory usage ScummVM for Nintendo DS has been split into several builds. Depending on the game you want to play you will have to run the correct build. Even so, some of the games cannot be run on a Nintendo DS because they require too much memory. You can find the list of supported games and which build you need to use for each one in the readme_ds.txt file present in the ScummVM Nintendo DS package. This information is also available on the Nintendo DS page.
You can find installation instructions for devices running Windows CE on the Windows CE page.
TODO: move the content to this page
Most instructions are written for the PC versions (which in some case is the only version) of the games. Windows and DOS use case-insensitive ﬁle systems, so if one CD has a ﬁle called MONKEY.DAT and another has a ﬁle called monkey.dat, they are the same ﬁles. These instructions give ﬁle names in all lower-case names, even if that’s not always how they appear on the CDs. In fact, on case-sensitive ﬁle systems you will have to make sure that all ﬁlenames use either all upper- or all lower-case letters for ScummVM to be able to ﬁnd the ﬁles.
In general, ScummVM does not deal very well with multi-CD games. This is because ScummVM assumes everything about a game can be found in one directory. Even if ScummVM does make some provisions for asking the user to change CD, the original games usually install a small number of ﬁles to hard disk. Unless these ﬁles can be found on all the CDs, ScummVM will be in trouble.
Fortunately, ScummVM has no problems running the games entirely from hard disk, if you create a directory with the correct combination of ﬁles. Usually, when a ﬁle appears on more than one CD you can pick either of them.
Macintosh games: Accessing HFS filesystems
You will need the "Windows Installer" from the download page. To copy the game data file from the CD to your hard disc, you will need HFVExplorer. Make sure you get the "HFV Explorer installer" rather than the zip file. When you choose to download the zip file, make sure you read the readme included with HFVExplorer, to set it up properly. Run the HFVExplorer installer and allow it to use its defaults. Alternatively you can also use the more recent HFSExplorer.
Start up HFVExplorer; if you don't have a shortcut for it, find it in "C:\Program Files\HFVExplorer". It should open the HFS (Macintosh filesystem) CD-ROM automatically when you insert the disc. Make sure HFVExplorer is displaying hidden files: Select View->Options and enable "Show invisible Mac files" on the "File attributes" tab.
Now, look for the data file in the right pane. It will probably end with the word "Data" and will be the largest file on the volume. For instance (using Sam & Max Hit the Road as an example), it is called "Sam & Max Data" on the "Sam & Max" CD-ROM. Select the data file and copy it (use Ctrl+C or Edit->Copy). In the left HFVExplorer pane, navigate to the directory where you want the game to reside on your hard disc. We recommend selecting drive C: and creating a new folder called "SamNMax" or a name that better reflects your particular game.
Paste the data file (with Ctrl+V or Edit->Paste) and allow HFVExplorer to choose the copy mode. Now, wait while the program copies several hundred megabytes from the CD. When the file is copied, close HFVExplorer.
More details (including how to use extract_scumm_mac) can be found at HOWTO-Mac_Games, a wiki page dedicated specifically to Macintosh games.
Games Specific instructions
LucasArts Games (SCUMM Engine)
The Curse of Monkey Island
For this game, you will need the comi.la0, comi.la1 and comi.la2 files. The comi.la0 file can be found on either CD, but since they are identical it doesn't matter which one of them you use.
In addition, you will need a resource subdirectory with all of the files from the resource subdirectories on both CDs. Some of the files appear on both CDs, but again they're identical.
All LucasArts SCUMM based adventures except Curse of Monkey Island also exist in versions for the Macintosh. ScummVM can use most (all?) of them, however, in some cases some additional work is required.
First off, if you are not using a Macintosh for this, accessing the CD/floppy data might be tricky. See notes in the Accessing HFS filesystems section.
Most of the newer games on the Macintosh shipped with only a single data file (note that in some cases this data file was made invisible, so you may need extra tools in order to copy it). ScummVM is able to directly use such a data file; simply point ScummVM at the directory containing it, and it should work (just like with every other supported game).
We also provide a tool called 'extract_scumm_mac' in the tools package to extract the data from these data files, but this is neither required nor recommended.
Maniac Mansion NES
Supported versions are English GB (E), French (F), German (G), Swedish(SW) and English US (U). ScummVM requires just the PRG section to run and not the whole ROM.
In order to get the game working, you will have to strip out the first 16 bytes from the ROM you are trying to work with. Any hex editor will work as long as you are able to copy/paste. After you open the ROM with the hex editor, copy everything from the second row (17th byte) to the end. After you do this, paste it to a new hex file. Name the new file "Maniac Mansion (XX).prg" while XX stands for the version you are working with (E, F, G, SW, or U). The final size should be exactly 262144 bytes.
If you add the game manually make sure that the platform is set to NES.
Most common mistakes which prevents the game from running:
- Bad file
- ROM extracted with the 0.7.0 tools
- You try to feed ScummVM with the FULL ROM and not just the PRG section.
It is also possible to extract the separate LFL files from the PRG section. To do so use the 'extract_mm_nes' utility from the tools package.
Maniac Mansion Commodore 64
This games is detected and runs in ScummVM but is not yet completable. Simply name the D64 disks "maniac1.d64" and "maniac2.d64", then ScummVM should be able to automatically detect the game if you point it at the right directory.
Alternatively, you can use 'extract_mm_c64' from the tools package to extract the data files. But then the game will not be properly auto-detected by ScummVM, and you must make sure that the platform is set to Commodore64. We recommend using the much simpler approach described in the previous paragraph.
Zak McKracken Commodore 64
Rename the D64 disks "zak1.d64" and "zak2.d64", then ScummVM should be able to automatically detect the game if you point it at the right directory.
Alternatively, you can use 'extract_zak_c64' from the tools package to extract the data files. But then the game will not be properly auto-detected by ScummVM, and you must make sure that the platform is set to Commodore64. We recommend using the much simpler approach described in the previous paragraph.
Revolution Software Games
Beneath a Steel Sky
In August 2003, the creators and copyright holders of Beneath a Steel Sky, Revolution Software, released the game as freeware for use with ScummVM. You can therefore download the game from our Downloads page. Then follow the general instructions.
Starting with ScummVM 0.8.0 you need the additional 'SKY.CPT' file to run Beneath a Steel Sky. This file is distributed with ScummVM on most platforms. You can place it in either the directory containing the other game data files (SKY.DNR, SKY.DSK), in your extrapath, or in the directory where your ScummVM executable resides.
Broken Sword 1
For this game, you will need all of the ﬁles from the clusters directories on both CDs. You will also need the speech.clu ﬁles from the speech directories, but since they are not identical you will need to rename them speech1.clu and speech2.clu for CD 1 and 2 respectively.
In addition, you will need a music subdirectory with all of the ﬁles from the music subdirectories on both CDs. Some of these ﬁles appear on both CDs, but in these cases they are either identical or, in one case, so nearly identical that it makes little difference.
Starting with ScummVM 1.0.0, the original Smacker cutscenes (.smk files) are supported without having to download a video pack from the website. To use them you will need to copy the files from the smackshi directories of both CDs. You can ignore the smackslo directories since they contains lower quality versions of the same cutscenes.
Broken Sword 2
For this game, you will need all of the ﬁles from the clusters directories on both CDs. (Actually, a few of them may not be strictly necessary, but the ones that I’m uncertain about are all fairly small.) You will need to rename the speech.clu and music.clu ﬁles speech1.clu, speech2.clu, music1.clu and music2.clu so that ScummVM can tell which ones are from CD 1 and which ones are from CD 2. Any other ﬁles that appear in both cluster directories are identical. Use whichever you like.
In addition, you will need the cd.bin, cd.inf and startup.inf ﬁles from the sword2 directory on CD 1.
Starting with ScummVM 1.0.0, the original Smacker cutscenes (.smk files) are supported without having to download a video pack from the website.
Adventure Soft Games
Simon the Sorcerer 1 and 2
If you have the dual version of Simon the Sorcerer 1 or 2 on CD, you will find the Windows version in the main directory of the CD and the DOS version in the DOS directory of the CD. Both are supported by ScummVM but depending on the version you want to use you will not need to copy the same files (see the game datafiles page for more details).
The Feeble Files
The following instructions are valid for the Windows versions of the game. Depending on the version that you have, you will have either two CDs or four CDs. The instructions to use this game with ScummVM are nearly the same for both versions.
You will need to copy all the files listed in the game datafiles page in a directory on your hard drive. Some of the files can be copied directly from the CDs and others are packed into an InstallShield Cabinet file (the files with the .cab extension). For the later you will either need to run the installer on Windows (or using Wine or Darwine on Linux and Mac OS X respectively) or to unpack the files using the i5comp decompression tool (unshield has been reported to fail on these files). After running the installer you can copy the files from where they were installed to the directory in which you are copying all the files for ScummVM.
During the copy you have to pay special attention to the voices.wav files. There is one on each CD and they are different. Therefore you will have to rename them so that you can copy all of these files in the same directory. Rename voices.wav from CD1 to voices1.wav and voices.wav from CD2 to voices2.wav. If you have the four CDs version you will also need to rename voices.wav from CD 3 and 4 to voices3.wav and voices4.wav respectively.
Starting from version 0.13.0 ScummVM can read the original Smacker video files (the files with the .smk extension). If you are using an older version of ScummVM you will need to re-encode the video files using the RAD Video Tools and the 'encode_dxa' tool (or 'convert_dxa.bat' batch file).
Flight of the Amazon Queen
In March 2004, the creators and copyright holders of Flight of the Amazon Queen, John Passfield and Steve Stamatiadis, released the game as freeware for use with ScummVM. You can therefore download the game from our Downloads page. Then follow the general instructions.
If you have the original CD of the game game and would like to play this version, you will also need the 'queen.tbl' file. This file is distributed with ScummVM on most platforms. You can place it in either the directory containing the 'queen.1' file, in your extrapath, or in the directory where your ScummVM executable resides.
Alternatively you can use the 'compress_queen' tool from the tools package to 'rebuild' your FOTAQ data file to include the table for that specific version, and thus removing the run-time dependency on the 'queen.tbl' file. This tool also allows you to compress the speech and sound effects with MP3, OGG or FLAC.
The Legend of Kyrandia
To run The Legend of Kyrandia under ScummVM you need the 'kyra.dat' file. This file is distributed with ScummVM on most platforms. You can place it in either the directory containing the other game data files, in your extrapath, or in the directory where your ScummVM executable resides.
Drascula: The Vampire Strikes Back
In August 2008, the creators and copyright holders of Drascula: The Vampire Strikes Back, Alcachofa Soft, released the game as freeware for use with ScummVM. It is available for download from our Downloads page.
- You will need to download the English version (even if you want to play it in another language). You will also need the 'DRASCULA.DAT' file. This file is distributed with ScummVM on most platforms. If ScummVM complains that it cannot find this file or that it has the wrong version you can download it on the Downloads page of the ScummVM website. You can place it in either the directory containing the 'PACKET.001' game data file, in your extrapath, or in the directory where your ScummVM executable resides.
- Then if you want to play the game in another language (Spanish, German, French or Italian) you will also need to download the international pack and put the files together with the English version file (i.e. have all the PACKET.00# and DRASCULA.DAT files in the same directory).
- Finally to play the game with a music score you will need to download the Music Add-on and put the ogg files together with the other game files.
- Then follow the general instructions to add the game in ScummVM. If you have installed the international pack, it will ask you in which language you want to play the game when adding it in ScummVM. You can add the game several times with a different language if you want to. The English and Spanish versions both have voice over in that language. The other versions will use English voice over with subtitles in the language you selected.
Note: in the Music add-on the ogg files are in an audio directory, if you keep them in that directory you will need to add it in the Game extra path. To do so, after adding the game in ScummVM, select the game in the ScummVM launcher and click on Edit Game. Then go to the Paths tab and in Extra Path add the path to the Music directory in which all the ogg files should be. Alternatively you can move all the ogg files in the same directory where you have the data files (the PACKET.00# files), and it will pick up the music without having to select an extra path.
In order to get the game working, you will have to extract the STK files hidden on the CD. In order to do so, create an ISO of the first (data) track on your original disc (~11M, not 652M), then use the 'extract_fascination_cd' utility from the tools package to create the four STK files and copy those files to the game directory. The game also uses the following audio track containing the speech. Extract it and compress it as per other games with CD-DA audio, then copy it to the game directory (named as track1.mp3).
|Prev: Configuring ScummVM||Back to Table of Content||Next: Adding a game to ScummVM|