Difference between revisions of "Compiling ScummVM/Visual Studio"

From ScummVM :: Wiki
Jump to navigation Jump to search
m (Added extra sub-section header in instructions)
(→‎Generating the Project Files: Add info on using FluidLite instead of FluidSynth when using the prebuilt libraries)
 
(23 intermediate revisions by 8 users not shown)
Line 1: Line 1:
== Compiling ScummVM with Visual Studio under Windows ==
== Installing the needed software and libraries ==


Compiling ScummVM under Windows is not an awfully hard task, however there are some things that don't just work out of the box
In this page, we guide you through the steps to compile ScummVM with Visual Studio.


Support for MS Visual Studio 2005 (MSVC8) was removed on 2014-06-21. Use a newer version of Visual Studio.
=== Visual Studio ===
You can get the free Community version of Visual Studio [https://visualstudio.microsoft.com/vs/ here].
Professional Visual Studio versions are working fine too.


== Things needed ==
When installing Visual Studio 2017 or later, make sure to select the "Desktop Development with C++" workload.


=== Visual Studio 2015 ===
Building ScummVM with Visual Studio versions older than 2015 is not supported anymore.
There exists a free Community version of Visual Studio 2015 [https://www.visualstudio.com/en-US/products/visual-studio-express-vs here] that can be used.
 
Visual Studio 2015 or 2013 is preferred for compiling ScummVM, but old older versions of Visual Studio may work so long as you have them updated to their latest Service Pack revisions. In fact, we suggest making sure that you always have the latest Service Packs and patches applied for these tool sets. In some cases, fixes were put into the free-to-download "Processor Pack" add-on for Visual C++. So, download the latest Service Pack and the latest Processor Pack for whatever version of Visual C++ you are using to make sure you won't run into compiler bugs that prevent the compilation of ScummVM.
 
The one exception is the later service packs for Visual Studio 2013. At least Service Pack 5, and maybe earlier packs will, if installed, cause ScummVM to give errors about duplicate 'snprintf' definitions. This is specially handled for Visual Studio 2015 with a special check in common/scummsys.h. If you're experiencing the problem in 2013, you can always manually comment out the method from scummsys.h.


=== Needed Libraries ===
=== Needed Libraries ===
In order to compile ScummVM, you will need to install some third party libraries that it needs. To make things simple, we've created a zip containing all the necessary library files, includes, DLLs, and executables. There are two versions available; download the correct one for the version of MSVC you're using:
ScummVM relies on third-party libraries for common features, such as MP3 decoding. Some of these libraries, like SDL, are required, whereas others like libtheora are optional.
* Download for Visual Studio [http://sourceforge.net/projects/scummvm/files/build/scummvm_libs_2015.zip/download 2015]
* Download for Visual Studio [http://sourceforge.net/projects/scummvm/files/build/scummvm_libs_2013.zip/download 2013] and earlier.
 
=== Installing Libraries & Compiling ===
Follow these steps to install the libraries on your system:
* Unzip the library zip file you downloaded into a folder on your system where it can permanently stay. For example, you could use "c:\Program Files (x86)\scummvm_libs".
* Go to Control Panel | Environment Variables and set up a new variable "SCUMMVM_LIBS" with a value of the path you extracted the zip in
* In the extracted folder's bin subfolder you'll find some DLL files. Copy all of them to Window's system folder, which is usually c:\windows\SysWow64
* Checkout a copy of the ScummVM source if you haven't already done so
* Under the ScummVM root folder, open the create_project Visual Studio 2015 project in devtools/create_project/msvc14
* Compile create_project. That should automatically copy the resulting create_project.exe to ScummVM's dists/msvc14 folder.
* Run the dists/msvc14/create_msvc14.bat batch file to create the Visual Studio 2015 project for ScummVM. You can choose to either only include projects for Stable engines (which are officially supported), or all engines, which includes experimental and incomplete game engines.
* Open up the created Visual Studio project for ScummVM in dists/msvc14, compile, and run ScummVM.
 
That should be all that's required. The rest of this document has various instructions that may be helpful if you want to compile your own versions of the libraries, or if you really want to use an older version of Visual Studio.
 
== Manually Installing Libraries ==
If you feel like getting the various packages separately and compiling them yourself; following is some older instructions on getting the libraries individually:
 
* Download [http://www.nasm.us/ nasm] which is used for assembler versions of our scalers.
* Download the [http://sourceforge.net/projects/scummvm/files/build/scummvm_vs_libs.zip/download some of precompiled libraries for 2013 and earlier].
* Download the [http://www.libsdl.org/release/SDL-1.2.15-win32.zip latest SDL runtime library] - latest version is 1.2.15 at the time this was written, you can find the latest version [http://www.libsdl.org/download-1.2.php here].
* Download the [http://gnuwin32.sourceforge.net/packages/freetype.htm FreeType library]. You'll need the [http://gnuwin32.sourceforge.net/downlinks/freetype.php complete package] and the [http://gnuwin32.sourceforge.net/downlinks/freetype-lib-zip.php developer libraries]. You'll need to copy the .lib files to your Visual Studio vc/lib folder, and the freetype6.dll and zlib1.dll files from the Freetype bin folder (default c:\Program Files (x86)\GnuWin32\bin) to your Windows folder.
* Download the [http://libjpeg-turbo.virtualgl.org/ libjpeg-turbo library] and copy the library files to your Visual Studio VC/lib folder,
* Unzip the precompiled libraries archive maintaining directory structure
* Run install.bat (Visual Studio 2008 only) or [[Compiling_ScummVM/Visual_Studio#Adding_all_libraries_to_Visual_Studio_2010|add the libraries by hand]] (Visual Studio 2010)
* You don't need to add the libraries to Visual Studio, as the installer automatically copies the necessary files in the appropriate directories of Visual Studio. Please note that this installer has only been tested with Visual Studio 2005 and 2008. If you get errors with earlier versions of Visual Studio, simply copy the directories ''bin'', ''lib'' and ''include'' inside the directory where Visual C++ is installed. If you're not sure how to do that, check the section "[[Compiling_ScummVM/Visual_Studio#Adding_all_libraries_to_Visual_Studio_2008|Adding all libraries to Visual Studio 2008]]" further on
* Unzip sdl.dll from the SDL runtime in the same directory where the scummvm executable will be created (under dists\<msvc_dir>\scummvm_Release) where <msvc_dir> is:
** msvc9 for Visual Studio 2008
** msvc10 for Visual Studio 2010
** msvc11 for Visual Studio 2012
** msvc12 for Visual Studio 2013
* Skip to step "[[Compiling_ScummVM/Visual_Studio#Ready to compile ScummVM|Ready to compile ScummVM]]"
 
=== Building the libraries yourself ===
Refer to the [[Compiling_ScummVM/Visual_Studio/Compiling_Libraries|instructions for compiling the libraries yourself]]
 
 
== Adding all libraries to Visual Studio 2010 and newer==
 
The way libraries are added has been changed in Visual Studio 2010, compared to earlier versions. Copy all of the precompiled libraries in a separate folder (e.g. c:\scummvm_libs). Then, there are two different ways of adding this directory to Visual Studio:
* Right click My Computer->Properties->Advanced (Win 2000/XP) or Advanced System Settings->Advanced (Vista/Win 7/Win 8)->Environment Variables->New (System Variable), with a variable name of "SCUMMVM_LIBS" and a value of the folder where you unpacked your precompiled libraries (e.g. "C:\scummvm_vs_libs"). You need to restart Visual Studio, if it's already running, for the change to take effect.
* If the above method doesn't work, open the ScummVM solution in Visual Studio, and go to View->Property Manager or View->Other Views->Property Manager (depending on your layout configuration). From there, open the ScummVM project, and go to the configuration you want to build (e.g. Debug|Win32) and click on "Microsoft.Cpp.Win32.user". From there, go to "VC++ directories" and add the 3 library directories in the appropriate places, i.e.:
 
  Executable Directories: add "C:\scummvm_vs_libs\bin;" at the beginning
  Include Directories: add "C:\scummvm_vs_libs\include;" at the beginning
  Library Directories: add "C:\scummvm_vs_libs\lib\x86" (or x64, if you're building a 64-bit version) at the beginning
 
If if still fails to build, saying it can't find a lib file, go to the project properties of the ScummVM project, Configuration Properties->Linker->General->Additional Library Directories and add your lib folder in there
 
 
== Adding all libraries to Visual Studio 2008 ==
 
There are two ways of adding the libraries to Visual Studio. You can either copy all the header and library files inside the appropriate directories of Visual C++ or tell Visual C++ where to look for them.
<br><br>
 
=== First method: Copy the files inside VC++'s folders ===
The '''first method''' of adding the required libraries is to go to each individual compiled library and copy the header and library files.
 
You'll need the following:<br><br>
'''Libraries'''<br>
  '''libFLAC_static.lib''' - static build of libFLAC (from folder obj\release\lib where you unzipped libFLAC)
  '''libmad.lib''' - static build of libMAD (from folder msvc++\Release where you unzipped libmad)
  '''libmpeg2.lib''' - static build of libMPEG2 (from folder vc++\Release where you unzipped mpeg2dec)
  '''libpng.lib''' - static build of libpng (from folder projects\visualc71\Win32_LIB_Release where you unzipped libpng)
  '''ogg_static.lib''' - static build of libOGG (from folder win32\Static_Release where you unzipped libogg)
  '''sdl.lib''' - static build of SDL (from folder lib where you unzipped SDL)
  '''vorbisfile_static.lib''' - static build of vorbisfile (from folder win32\VorbisFile_Static_Release where you unzipped libvorbis)
  '''vorbis_static.lib''' - static build of libvorbis (from folder win32\Vorbis_Static_Release where you unzipped libvorbis)
  '''vorbisenc_static.lib''' - static build of libvorbis (from folder win32\Vorbisenc_Static_Release where you unzipped libvorbis)
  '''zlib.lib''' - static build of zlib (from folder projects\visualc6\Win32_LIB_Release where you unzipped zlib)
 
Copy those inside VC's lib folder (e.g. C:\Program Files\Microsoft Visual Studio 8\VC\lib)
<br><br>
'''Header files'''<br>
  [TODO]


Copy those inside VC's include folder (e.g. C:\Program Files\Microsoft Visual Studio 8\VC\include)
We supply a set of prebuilt libraries for Visual Studio 2015 and later, which can be found [https://downloads.scummvm.org/frs/build/scummvm_libs_2015.zip here].
<br><br>
'''Executable files'''<br>
  '''nasmw.exe''' - from the NASM zip


Copy this as nasmw.exe AND as nasm.exe inside VC's bin folder (e.g. C:\Program Files\Microsoft Visual Studio 8\VC\bin)
These libraries have been built on Windows 8.1 using the Visual Studio 2015 Community Edition.
<br><br>


=== Second method: Tell VC++ where to look ===
When compiling for Windows on ARM, you will need the download the [https://devblogs.microsoft.com/directx/announcing-the-opencl-and-opengl-compatibility-pack-for-windows-10-on-arm/ OpenGL Compatibility Pack]. An updated version of the compatibility pack can be found in the Microsoft Store [https://apps.microsoft.com/detail/9nqpsl29bfff?ocid=pdpshare&hl=en-us&gl=US here].
The '''second method''' is to tell VC++ where to look for the required libraries and header files


Go to Tools->Options->Projects and solutions->VC++ directories.  
If you want to build libraries for use with Visual Studio yourself, please refer to the [[Compiling_ScummVM/Visual_Studio/Compiling_Libraries|instructions for compiling the libraries yourself]].


In the executable files section, make sure that the path to nasm is included and that nasmw.exe in that folder has been copied to nasm.exe. Failure to do that will give you an error in VS (a custom building step has returned an error)
=== Installing Libraries ===
The easiest way to make Visual Studio find the supplied libraries is by using the environment variable <code>SCUMMVM_LIBS</code>. You can set it by performing the following steps:
* Unzip the library zip to a directory of your choice, for example <code>C:\Users\YourUsername\Documents\scummvm_libs_2015</code>.
* Go to Start Menu > Control Panel > System > Advanced Settings > Environment Variables (or <code>Win</code>+<code>R</code> and then <code>SystemPropertiesAdvanced.exe</code>) and add a new variable <code>SCUMMVM_LIBS</code> with a value of the path you extracted the zip in. It is important that you do point the variable to the folder containing the <code>bin\</code>, <code>include\</code>, and <code>lib\</code> directories.


In the include files section, make sure that the include folders for libogg, libvorbis, libmad, zlib, mpeg2dec and SDL are in the list. If you need FLAC, include the FLAC include folder in the list too
== Preparing the Project Files ==


In the library files section, make sure that the static libraries for vorbis, vorbisfile, libogg, zlib, mpeg2dec, libmad and SDL are included. If you're building 0.8.0 final or earlier, include the release folder of zlibdll too (in the zlib source folder, contrib\vstudio\vc8\x86\zlibdllrelease). If you need FLAC, include the FLAC libraries folder too
=== Building create_project ===


Finally, if you need to compile ScummVM with FLAC support, go to Configuration Properties->C/C++->Preprocessor and add "USE_FLAC" in the Preprocessor Definitions field. Also, go to linker->input and add "libflac_static.lib" in the Additional Dependencies field.
ScummVM uses a configure/Make based build system. We have a tool to generate Visual Studio project files from this build system. The first step you need to take is building this tool called <code>create_project.exe</code>.


First, open the solution file <code>devtools\create_project\msvc\create_project.sln</code> (either from the File Explorer or from the File > Open project/solution menu). Then simply build the solution, with Build > Build solution. If this doesn't work, make sure that the Visual Studio C++ tools have been properly set up, as [[#Visual_Studio|explained above]].


== Enabling the console ==
The project file should automatically assure that the resulting <code>create_project.exe</code> is copied to <code>dists\msvc\</code>.


Since information on doing this is not that easy to find, here's how to enable the console in the resulting ScummVM executable.
=== Generating the Project Files ===
The default project subsystem is "Windows" instead of "Console", which means that the console will not be shown.


To show the console, right-click on the "scummvm" project and go to Properties. There, go to Configuration Properties->Linker->System and change the "Subsystem" property from "Windows (/SUBSYSTEM:WINDOWS)" to "'''Console (/SUBSYSTEM:CONSOLE)'''". Then, go to Linker->Advanced and set the entry point to be "'''WinMainCRTStartup'''" (special thanks to [[User:Jubanka|Jubanka/knakos]] for his tip on entrypoint).
Simply run the batch script <code>dists/msvc/create_msvc.bat</code>. It will guide you through configuring ScummVM.


== Creating the project files ==
'''IMPORTANT''': You will have to re-generate the project files whenever new source files have been added to or removed from the configure/Make based build system. When you add new files to ScummVM, you will ''have'' to add them to the respective <code>module.mk</code> file to assure ScummVM still builds fine with the configure/Make based build system.


First, open relevant solution file in devtools/create_project/msvc<your-version>, and build create_project.exe file.
==== In case of missing dependency ====
When using the prebuilt libraries, you might be missing a dependency, and compiling could give an error complaining about a missing header, e.g. <code>fluidsynth.h</code>. You can work around this by calling <code>create_project.exe</code> directly, and passing additional arguments to enable/disable features. For example, to use FluidLite (which is included in the prebuilt libraries) instead of FluidSynth, you can create a project for all engines and FluidLite like this:<syntaxhighlight lang="powershell">
cd dists\msvc
.\create_project ..\.. --msvc --enable-fluidlite
</syntaxhighlight>


Then put the resulting create_project.exe file in dists/msvc<your-version> and run create_msvc<your-version>.bat in that directory.
== Compiling ScummVM ==


The program will generate whole solution projects for building ScummVM.
If you followed all the steps, you are now ready to compile ScummVM with Visual Studio. Congratulations!


== Ready to compile ScummVM ==
Simply open the generated solution file in <code>dists\msvc\scummvm.sln</code>. Now you can ask it to build the desired configuration. By default it will build a debug configuration which is ideal to hack on ScummVM.


If you got all the libraries compiled, you're ready to compile the latest version of ScummVM!
'''IMPORTANT''': If you get errors about missing DLLs, you'll need to copy them to a location Windows picks up to run the resulting binary. The easiest way to do this is to place the DLL files in the directory where <code>scummvm.exe</code> is. There are multiple folders to choose from, depending on your build configuration. For example, if you build a Win32 Debug configuration, you will need to copy them from <code>SCUMMVM_LIBS\lib\x86\Debug\</code> to <code>dists\msvc\Debugx86\</code>.


Open the solution file in dists\msvcXX, select the "Release" configuration from the configuration manager pulldown menu and then go to Build->Build solution, or just press Control-F7 to compile it.
NOTE: Several people have had errors about structure packing under Visual Studio 2019. In such cases, you need to update [https://github.com/libsdl-org/SDL/releases SDL2] with the latest version.


The ScummVM executable should be in the folder dists\msvcXX\scummvm_Release as "scummvm.exe".
== Compiling with Console/Text Output ==


You'll need to copy sdl.dll from the SDL runtime archive (or the latest devel archive) in the directory where scummvm.exe is
By default ScummVM is compiled as a Windows subsystem application with no console output. If you need the console, you can do one of the following:
* In the <code>create_project</code> command, add <code>--enable-text-console</code>.
* In the Project Options for the ScummVM project, go to the Linker | System | SubSystem line, and change the <code>/SUBSYSTEM:WINDOWS</code> option to <code>/SUBSYSTEM:CONSOLE</code>

Latest revision as of 09:44, 17 November 2024

Installing the needed software and libraries

In this page, we guide you through the steps to compile ScummVM with Visual Studio.

Visual Studio

You can get the free Community version of Visual Studio here. Professional Visual Studio versions are working fine too.

When installing Visual Studio 2017 or later, make sure to select the "Desktop Development with C++" workload.

Building ScummVM with Visual Studio versions older than 2015 is not supported anymore.

Needed Libraries

ScummVM relies on third-party libraries for common features, such as MP3 decoding. Some of these libraries, like SDL, are required, whereas others like libtheora are optional.

We supply a set of prebuilt libraries for Visual Studio 2015 and later, which can be found here.

These libraries have been built on Windows 8.1 using the Visual Studio 2015 Community Edition.

When compiling for Windows on ARM, you will need the download the OpenGL Compatibility Pack. An updated version of the compatibility pack can be found in the Microsoft Store here.

If you want to build libraries for use with Visual Studio yourself, please refer to the instructions for compiling the libraries yourself.

Installing Libraries

The easiest way to make Visual Studio find the supplied libraries is by using the environment variable SCUMMVM_LIBS. You can set it by performing the following steps:

  • Unzip the library zip to a directory of your choice, for example C:\Users\YourUsername\Documents\scummvm_libs_2015.
  • Go to Start Menu > Control Panel > System > Advanced Settings > Environment Variables (or Win+R and then SystemPropertiesAdvanced.exe) and add a new variable SCUMMVM_LIBS with a value of the path you extracted the zip in. It is important that you do point the variable to the folder containing the bin\, include\, and lib\ directories.

Preparing the Project Files

Building create_project

ScummVM uses a configure/Make based build system. We have a tool to generate Visual Studio project files from this build system. The first step you need to take is building this tool called create_project.exe.

First, open the solution file devtools\create_project\msvc\create_project.sln (either from the File Explorer or from the File > Open project/solution menu). Then simply build the solution, with Build > Build solution. If this doesn't work, make sure that the Visual Studio C++ tools have been properly set up, as explained above.

The project file should automatically assure that the resulting create_project.exe is copied to dists\msvc\.

Generating the Project Files

Simply run the batch script dists/msvc/create_msvc.bat. It will guide you through configuring ScummVM.

IMPORTANT: You will have to re-generate the project files whenever new source files have been added to or removed from the configure/Make based build system. When you add new files to ScummVM, you will have to add them to the respective module.mk file to assure ScummVM still builds fine with the configure/Make based build system.

In case of missing dependency

When using the prebuilt libraries, you might be missing a dependency, and compiling could give an error complaining about a missing header, e.g. fluidsynth.h. You can work around this by calling create_project.exe directly, and passing additional arguments to enable/disable features. For example, to use FluidLite (which is included in the prebuilt libraries) instead of FluidSynth, you can create a project for all engines and FluidLite like this:

cd dists\msvc
.\create_project ..\.. --msvc --enable-fluidlite

Compiling ScummVM

If you followed all the steps, you are now ready to compile ScummVM with Visual Studio. Congratulations!

Simply open the generated solution file in dists\msvc\scummvm.sln. Now you can ask it to build the desired configuration. By default it will build a debug configuration which is ideal to hack on ScummVM.

IMPORTANT: If you get errors about missing DLLs, you'll need to copy them to a location Windows picks up to run the resulting binary. The easiest way to do this is to place the DLL files in the directory where scummvm.exe is. There are multiple folders to choose from, depending on your build configuration. For example, if you build a Win32 Debug configuration, you will need to copy them from SCUMMVM_LIBS\lib\x86\Debug\ to dists\msvc\Debugx86\.

NOTE: Several people have had errors about structure packing under Visual Studio 2019. In such cases, you need to update SDL2 with the latest version.

Compiling with Console/Text Output

By default ScummVM is compiled as a Windows subsystem application with no console output. If you need the console, you can do one of the following:

  • In the create_project command, add --enable-text-console.
  • In the Project Options for the ScummVM project, go to the Linker | System | SubSystem line, and change the /SUBSYSTEM:WINDOWS option to /SUBSYSTEM:CONSOLE
Retrieved from "https://wiki.scummvm.org/index.php?title=Compiling_ScummVM/Visual_Studio&oldid=42002"