AGI/Specifications/Other/AGI256/Implementation Details
In the original PC AGI interpreter v2.936 the engine holds the color and priority/control line information for each pixel in a 160x168 byte buffer. The color data for each pixel is held in the byte's lower 4 bits and the priority/control line data is held in the upper 4 bits.
AGI256 extends this 160x168 byte buffer to a 320x168 byte buffer so that the 256-color data is held in the right 160x168 half of the buffer and the original style 16-color and priority/control line information is held in the left 160x168 half of the buffer.
When loading 256-color picture resource with the unknown170 command the picture is loaded straight into the right 160x168 half of the 320x168 memory buffer.
Cel blitting routine is modified so that when sprite data would normally be written to a position (x, y) in the 16-color buffer (i.e. the left 160x168 half) it's actually written to the same position (x, y) but in the 256-color buffer (i.e. the right 160x168 half).
Used external info
I used Nick Sonneveld's disassemblies of various PC AGI interpreter versions when trying to figure out AGI256. Those IDA databases were highly useful for understanding. Thanks Nick. You can check out the disassemblies if you're interested at the AGI Development Site.
Differences between AGI v2.936 and AGI256
Added files in AGI256:
- AGIGRAF.OVL
- AGIOBJS.OVL
Differences in the following files:
- AGI.EXE
- AGIDATA.OVL
Reverse engineered C version of AGI256's AGIOBJS.OVL
Things may be wrong, misleading etc. Caveat emptor.
This is the cel blitting routine from AGIOBJS.OVL.
struct blitStruct {
uint8 b0;
uint8 b1;
uint8 notEgo; // Sort of a guess based on variable's usage, may also be dontUpdateEgoVisibility or something like that
uint16 xPos;
uint16 yPos; // Is this named correctly?
uint8 b7;
uint8 b8;
uint8 b9;
uint8 b10;
uint8 b11;
uint8 b12;
uint8 b13;
uint8 b14;
uint8 b15;
struct celStruct *celPtr; // Offset into segment DS really, 16 bits
uint8 b18;
uint8 b19;
uint8 b20;
uint8 b21;
uint8 b22;
uint8 b23;
uint8 b24;
uint8 b25;
uint8 b26;
uint8 b27;
uint8 b28;
uint8 b29;
uint8 b30;
uint8 b31;
uint8 b32;
uint8 b33;
uint8 b34;
uint8 b35;
uint8 celPriority;
};
struct celStruct {
uint8 width; // This is a guess
uint8 height;
union {
uint8 flags; // Uses values from enum flagsEnum
uint8 transparentColor; // Only lower 4 bits
};
uint8 rleData[?];
};
enum flagsEnum {
F_MIRROR = 1 << 7;
};
#define _WIDTH 160
#define _HEIGHT 168
uint16 screenOffset(uint8 x, uint8 y) {
return y * (_WIDTH * 2) + x;
}
void agi256BlitCel(struct blitStruct *s) {
uint8 *pic = &agi256PicSeg[0];
const uint16 endPos = (_WIDTH * 2) * (_HEIGHT - 1); // I would have put (((_WIDTH * 2) * (_HEIGHT - 1)) - _WIDTH) here
bool celInvisible = true;
uint8 height = s->celPtr->height;
uint8 celPriority = s->celPriority;
if (s->celPtr->flags & F_MIRROR) // Test for mirroring
blitMirrorCell();
uint8 *rleData = s->celPtr->rleData;
uint16 pos = screenOffset(s->xPos, s->yPos - height + 1);
uint8 transparentColor = s->celPtr->transparentColor;
do {
uint16 oldPos = pos;
while (uint8 rleByte = *(rleData++)) { // rleByte != 0
uint8 runColor = rleByte >> 4;
uint8 runLength = rleByte & 0x0f;
if (runColor == transparentColor) { // Check for transparency
pos += runLength;
} else do {
uint8 pixelPriority = pic[pos] >> 4; // Read pixel's priority/control line info
if (pixelPriority < 3) {
pixelPriority = 0;
for (uint16 ySearchPos = pos + _WIDTH * 2;
ySearchPos < endPos && (pixelPriority = pic[ySearchPos] >> 4) < 3;
ySearchPos += _WIDTH * 2);
}
if (celPriority >= pixelPriority) {
pic[pos + _WIDTH] = runColor;
celInvisible = false;
}
pos++;
} while (--runLength > 0);
}
pos = oldPos + _WIDTH * 2;
} while (--height > 0);
if (!s->notEgo)
setFlag(f1, celInvisible);
}
Differences between AGI v2.936's AGIDATA.OVL and AGI256's AGIDATA.OVL
dseg:0x08C5: dw offset CmdUnknown170
Unknown170 command's subroutine's location has been changed from the original 0x2726 to hacked 0x9975. 0x9975 goes beyond what is in AGI.EXE so it goes to point to the AGIGRAF.OVL's functions. AGIGRAF.OVL is loaded into cseg:0x9800 so taking away the displacement we get 0x9975-0x9800 = 0x175. See the AGIGRAF.OVL disassembly for more details about the function that this points to.
Disassembly of AGIGRAF.OVL
codeseg:9800 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9800
codeseg:9800 ; AGIGRAF.OVL starts here at 0x9800
codeseg:9800 ; Attributes: thunk
codeseg:9800
codeseg:9800 j_AG_setGrafMode proc near ; CODE XREF: sub_5528+14�p
codeseg:9800 jmp AG_setGrafMode ; In Sonneveld's Agi2917.idb there was j_EGAGrafMode here.
codeseg:9800 j_AG_setGrafMode endp ;
codeseg:9800 ; Sets 320x200 256 color video mode (Mode 13h),
codeseg:9800 ; sets ds:[videoOfs] to 0xA000 and
codeseg:9800 ; clears first 64 KiB of video memory with zeroes.
codeseg:9803
codeseg:9803 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9803
codeseg:9803 ; Attributes: thunk
codeseg:9803
codeseg:9803 j_AG_setTextMode proc near ; CODE XREF: cmd_text_screen_106+1E�p
codeseg:9803 jmp AG_setTextMode ; In Sonneveld's Agi2917.idb there was j_EGATextMode here.
codeseg:9803 j_AG_setTextMode endp ;
codeseg:9803 ; Sets 40x25 16 color text mode,
codeseg:9803 ; enables background intensity (Colors 8-15),
codeseg:9803 ; sets some cursor stuff and
codeseg:9803 ; clears the text screen using ds:[textClrAttr] attribute.
codeseg:9806
codeseg:9806 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9806
codeseg:9806 ; Attributes: thunk
codeseg:9806
codeseg:9806 j_AG_agi256ShowPic proc near ; CODE XREF: sub_78CB+18�p
codeseg:9806 jmp AG_agi256ShowPic ; In Sonneveld's Agi2917.idb there was j_EGAShowPic here.
codeseg:9806 j_AG_agi256ShowPic endp ;
codeseg:9806 ; Sets the 320x200 256 color video mode,
codeseg:9806 ; clears screen etc (Look at setVideoMode)
codeseg:9806 ; and calls an unknown function.
codeseg:9809
codeseg:9809 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9809
codeseg:9809 ; Attributes: thunk
codeseg:9809
codeseg:9809 j_AG_emptyFunc4 proc near
codeseg:9809 jmp AG_emptyFunc4 ; In Sonneveld's Agi2917.idb there was an empty function here too.
codeseg:9809 j_AG_emptyFunc4 endp ;
codeseg:9809 ; Does nothing. Don't know what functionality
codeseg:9809 ; would have been here in the original AGI interpreter.
codeseg:9809 ; Maybe something to do with other than EGA graphics adapters?
codeseg:980C
codeseg:980C ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:980C
codeseg:980C ; Attributes: thunk
codeseg:980C
codeseg:980C j_AG_agi256PutBlock proc near ; CODE XREF: _Pic_Show+40�p
codeseg:980C ; sub_560C+E�p ...
codeseg:980C jmp AG_agi256PutBlock ; In Sonneveld's Agi2917.idb there was j_EGAPutBlock here.
codeseg:980C j_AG_agi256PutBlock endp ;
codeseg:980C ; Shows an AGI 256 picture (Puts it into video memory).
codeseg:980C ; Uses x2 horizontal stretching.
codeseg:980F
codeseg:980F ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:980F
codeseg:980F ; Attributes: thunk
codeseg:980F
codeseg:980F j_AG_calcHeightLUT proc near ; CODE XREF: sub_5528+E�p
codeseg:980F jmp AG_calcHeightLUT ; In Sonneveld's Agi2917.idb there was j_EGAInit here.
codeseg:980F j_AG_calcHeightLUT endp ;
codeseg:980F ; Precalculates table for Y*320 values (0 <= y < 200)
codeseg:9812
codeseg:9812 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9812
codeseg:9812 ; Attributes: thunk
codeseg:9812
codeseg:9812 j_AG_agi256FilledRect proc near ; CODE XREF: _BoxNBorder+11�p
codeseg:9812 ; _BoxNBorder+28�p ...
codeseg:9812 jmp AG_agi256FilledRect ; In Sonneveld's Agi2917.idb there was j_EGAFilledRect here.
codeseg:9812 j_AG_agi256FilledRect endp ;
codeseg:9812 ; Fills a solid rectangle in video memory with a given fill color.
codeseg:9812 ; Inputs:
codeseg:9812 ; DL = fill color
codeseg:9812 ; AL = yPos ?? (More like last row)
codeseg:9812 ; AH = xPos
codeseg:9812 ; BH = yLen
codeseg:9812 ; BL = xLen
codeseg:9815
codeseg:9815 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9815
codeseg:9815 ; In Sonneveld's Agi2917.idb there was j_EGAGrafMode here.
codeseg:9815 ;
codeseg:9815 ; Sets 320x200 256 color video mode (Mode 13h),
codeseg:9815 ; sets ds:[videoOfs] to 0xA000 and
codeseg:9815 ; clears first 64 KiB of video memory with zeroes.
codeseg:9815
codeseg:9815 AG_setGrafMode proc near ; CODE XREF: j_AG_setGrafMode�j
codeseg:9815 ; AG_agi256ShowPic+8�p
codeseg:9815 mov ax, 13h
codeseg:9818 int 10h ; - VIDEO - SET VIDEO MODE
codeseg:9818 ; AL = mode
codeseg:981A mov bx, 0A000h
codeseg:981D mov videoSeg, bx
codeseg:9821 nop
codeseg:9822 nop
codeseg:9823 nop
codeseg:9824 nop
codeseg:9825 nop
codeseg:9826 nop
codeseg:9827 push es
codeseg:9828 mov es, videoSeg
codeseg:982C xor ax, ax
codeseg:982E mov di, ax
codeseg:9830 mov cx, 8000h
codeseg:9833 repe stosw
codeseg:9835 pop es
codeseg:9836 retn
codeseg:9836 AG_setGrafMode endp
codeseg:9836
codeseg:9837
codeseg:9837 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9837
codeseg:9837 ; In Sonneveld's Agi2917.idb there was j_EGATextMode here.
codeseg:9837 ;
codeseg:9837 ; Sets 40x25 16 color text mode,
codeseg:9837 ; enables background intensity (Colors 8-15),
codeseg:9837 ; sets some cursor stuff and
codeseg:9837 ; clears the text screen using ds:[textClrAttr] attribute.
codeseg:9837 ; Attributes: bp-based frame
codeseg:9837
codeseg:9837 AG_setTextMode proc near ; CODE XREF: j_AG_setTextMode�j
codeseg:9837 push si
codeseg:9838 push di
codeseg:9839 push bp
codeseg:983A mov bp, sp
codeseg:983C sub sp, 2
codeseg:983F mov ax, 1 ; Set 40x25 16 color text (AH = 0, AL = 1)
codeseg:9842 int 10h ; - VIDEO - SET VIDEO MODE
codeseg:9842 ; AL = mode
codeseg:9844 mov ax, 1003h
codeseg:9847 xor bx, bx ; Disable blinking i.e. enable background intensity (Colors 8-15).
codeseg:9849 int 10h ; - VIDEO - TOGGLE INTENSITY/BLINKING BIT (Jr, PS, TANDY 1000, EGA, VGA)
codeseg:9849 ; BL = 00h enable background intensity
codeseg:9849 ; = 01h enable blink
codeseg:984B mov cx, 3000h
codeseg:984E mov ah, 1
codeseg:9850 int 10h ; - VIDEO - SET CURSOR CHARACTERISTICS
codeseg:9850 ; CH bits 0-4 = start line for cursor in character cell
codeseg:9850 ; bits 5-6 = blink attribute
codeseg:9850 ; CL bits 0-4 = end line for cursor in character cell
codeseg:9852 xor bh, bh
codeseg:9854 xor dx, dx
codeseg:9856 mov ah, 2
codeseg:9858 int 10h ; - VIDEO - SET CURSOR POSITION
codeseg:9858 ; DH,DL = row, column (0,0 = upper left)
codeseg:9858 ; BH = page number
codeseg:985A mov bh, byte ptr textClrAttr
codeseg:985E xor al, al ; AL = 0 = blank whole window
codeseg:9860 xor cx, cx ; CH = row 0
codeseg:9860 ; CL = column 0
codeseg:9862 mov dx, 1827h ; DH = row 24
codeseg:9862 ; DL = column 39
codeseg:9865 mov ah, 6
codeseg:9867 int 10h ; - VIDEO - SCROLL PAGE UP
codeseg:9867 ; AL = number of lines to scroll window (0 = blank whole window)
codeseg:9867 ; BH = attributes to be used on blanked lines
codeseg:9867 ; CH,CL = row,column of upper left corner of window to scroll
codeseg:9867 ; DH,DL = row,column of lower right corner of window
codeseg:9869 add sp, 2
codeseg:986C pop bp
codeseg:986D pop di
codeseg:986E pop si
codeseg:986F retn
codeseg:986F AG_setTextMode endp
codeseg:986F
codeseg:9870
codeseg:9870 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9870
codeseg:9870 ; In Sonneveld's Agi2917.idb there was j_EGAShowPic here.
codeseg:9870 ;
codeseg:9870 ; Sets the 320x200 256 color video mode,
codeseg:9870 ; clears screen etc (Look at setVideoMode)
codeseg:9870 ; and calls an unknown function.
codeseg:9870 ; Attributes: bp-based frame
codeseg:9870
codeseg:9870 AG_agi256ShowPic proc near ; CODE XREF: j_AG_agi256ShowPic�j
codeseg:9870 push si
codeseg:9871 push di
codeseg:9872 push bp
codeseg:9873 mov bp, sp
codeseg:9875 sub sp, 2
codeseg:9878 call AG_setGrafMode ; In Sonneveld's Agi2917.idb there was j_EGAGrafMode here.
codeseg:9878 ;
codeseg:9878 ; Sets 320x200 256 color video mode (Mode 13h),
codeseg:9878 ; sets ds:[videoOfs] to 0xA000 and
codeseg:9878 ; clears first 64 KiB of video memory with zeroes.
codeseg:987B call _Pic_Show ; Was _Pic_Show in Agi2917.idb
codeseg:987E add sp, 2
codeseg:9881 pop bp
codeseg:9882 pop di
codeseg:9883 pop si
codeseg:9884 retn
codeseg:9884 AG_agi256ShowPic endp
codeseg:9884
codeseg:9885
codeseg:9885 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9885
codeseg:9885 ; In Sonneveld's Agi2917.idb there was an empty function here too.
codeseg:9885 ;
codeseg:9885 ; Does nothing. Don't know what functionality
codeseg:9885 ; would have been here in the original AGI interpreter.
codeseg:9885 ; Maybe something to do with other than EGA graphics adapters?
codeseg:9885
codeseg:9885 AG_emptyFunc4 proc near ; CODE XREF: j_AG_emptyFunc4�j
codeseg:9885 retn
codeseg:9885 AG_emptyFunc4 endp
codeseg:9885
codeseg:9886
codeseg:9886 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9886
codeseg:9886 ; In Sonneveld's Agi2917.idb there was j_EGAPutBlock here.
codeseg:9886 ;
codeseg:9886 ; Shows an AGI 256 picture (Puts it into video memory).
codeseg:9886 ; Uses x2 horizontal stretching.
codeseg:9886
codeseg:9886 AG_agi256PutBlock proc near ; CODE XREF: j_AG_agi256PutBlock�j
codeseg:9886
codeseg:9886 xPos = ah ; Use case: 0
codeseg:9886 yPos = al ; Use case: 167 (Is this register named correctly??)
codeseg:9886 xLen = bl ; Use case: 160
codeseg:9886 yLen = bh ; Use case: 168
codeseg:9886
codeseg:9886 test xPos, 1
codeseg:9889 jz xPosEven
codeseg:988B dec xPos ; xPos wasn't even, so make it even by decreasing it by one
codeseg:988D inc xLen
codeseg:988F
codeseg:988F xPosEven: ; CODE XREF: AG_agi256PutBlock+3�j
codeseg:988F inc xLen
codeseg:9891 and xLen, 11111110b ; Make xLen even
codeseg:9894 mov cx, bx
codeseg:9896 sub yPos, yLen
codeseg:9898
codeseg:9898 loc_9898: ; CODE XREF: sub_5257+14�p
codeseg:9898 ; _Pic_Show+35�p ...
codeseg:9898 inc yPos ; Some Hercules code used to be at codeseg:0x9899
codeseg:9898 ; but isn't anymore. It's shouldn't be called in AGI256 at all.
codeseg:989A
codeseg:989A loc_989A: ; Calculates the screen offset for given coordinate? Video or AGI screen offset?
codeseg:989A call screenOffset ; DI = AL * 320 + AH
codeseg:989A ; (Destroys BX contents (Returns with BH = 0, BL = AH))
codeseg:989A ;
codeseg:989A ; Maybe not named quite correctly?
codeseg:989D mov si, di
codeseg:989F call agiToScreenCoords ; Calculates (baseY+Y)*320 + X*2
codeseg:989F ;
codeseg:989F ; Inputs: AL = Y, AH = X
codeseg:989F ; Reads from DS:[byte_B389] = baseY
codeseg:989F ; (Actually reads baseY as a word, but uses it like
codeseg:989F ; it can't overflow to over 8 bits when adding Y to it)
codeseg:989F ; Returns: DI = heightLUT[baseY+Y] + X*2 = (baseY+Y)*320 + X*2
codeseg:989F ; (Side-effects: BH = 0, BL = AH = X)
codeseg:98A2 jmp AG_convCoord ; Input: CX
codeseg:98A2 AG_agi256PutBlock endp ; BH = CH = Y
codeseg:98A2 ; BL = CL/2 = X / 2
codeseg:98A2 ; SI += 160 (Go to right half of the 320x168 area)
codeseg:98A2 ; goto AG_stretchToScreen
codeseg:98A5 ; ---------------------------------------------------------------------------
codeseg:98A5 nop
codeseg:98A6
codeseg:98A6 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:98A6
codeseg:98A6 ; Copies data from agi256 picture segment to video memory with x2 horizontal stretching.
codeseg:98A6 ; Both source and destination buffers use a stride/pitch of 320 bytes.
codeseg:98A6 ; Inputs:
codeseg:98A6 ; BL = xLen
codeseg:98A6 ; BH = yLen
codeseg:98A6 ; SI = srcOffset
codeseg:98A6 ; DI = destOffset
codeseg:98A6
codeseg:98A6 AG_stretchToScreen proc near ; CODE XREF: AG_convCoord+8�j
codeseg:98A6
codeseg:98A6 xLen = bl
codeseg:98A6 yLen = bh
codeseg:98A6 xCounterHi = ch
codeseg:98A6 xCounterLo = cl
codeseg:98A6
codeseg:98A6 push ds
codeseg:98A7 push es
codeseg:98A8 mov es, videoSeg
codeseg:98AC mov ds, agi256PicSeg
codeseg:98B0
codeseg:98B0 yLoop: ; CODE XREF: AG_stretchToScreen+2E�j
codeseg:98B0 xor xCounterHi, xCounterHi ; Stretches source AGI 256 picture into video memory
codeseg:98B0 ; (Doubles the width of the picture, so 160 becomes 320 etc).
codeseg:98B0 ; BL = source width (Probably 160)?
codeseg:98B0 ; BH = source height (Probably 168)?
codeseg:98B2 mov xCounterLo, xLen
codeseg:98B4 push di
codeseg:98B5 push si
codeseg:98B6
codeseg:98B6 xLoop: ; CODE XREF: AG_stretchToScreen+1E�j
codeseg:98B6 lodsw ; Read word from AGI 256 picture buffer
codeseg:98B7 nop
codeseg:98B8 nop
codeseg:98B9 nop
codeseg:98BA mov dl, ah
codeseg:98BC mov ah, al
codeseg:98BE stosw ; Put first read byte twice into video memory
codeseg:98BF mov al, dl
codeseg:98C1 mov ah, al
codeseg:98C3 stosw ; Put second read byte twice into video memory
codeseg:98C4 loop xLoop ; Loop xCounterLo times (xCounterHi is zero)
codeseg:98C6 pop si
codeseg:98C7 pop di
codeseg:98C8 dec yLen
codeseg:98CA jz end
codeseg:98CC add si, 320 ; Figuring that source image width is 160 and still its pointer
codeseg:98CC ; is added by 320 rather than 160 when going to the next line...
codeseg:98CC ; it might make sense if the priorities are 160 wide per row as well
codeseg:98CC ; and a row of picture data is always followed by a row of priority data.
codeseg:98D0 add di, 320
codeseg:98D4 jmp short yLoop ; Stretches source AGI 256 picture into video memory
codeseg:98D4 ; (Doubles the width of the picture, so 160 becomes 320 etc).
codeseg:98D4 ; BL = source width (Probably 160)?
codeseg:98D4 ; BH = source height (Probably 168)?
codeseg:98D6 ; ---------------------------------------------------------------------------
codeseg:98D6
codeseg:98D6 end: ; CODE XREF: AG_stretchToScreen+24�j
codeseg:98D6 pop es
codeseg:98D7 pop ds
codeseg:98D8 retn
codeseg:98D8 AG_stretchToScreen endp
codeseg:98D8
codeseg:98D9
codeseg:98D9 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:98D9
codeseg:98D9 ; In Sonneveld's Agi2917.idb there was j_EGAFilledRect here.
codeseg:98D9 ;
codeseg:98D9 ; Fills a solid rectangle in video memory with a given fill color.
codeseg:98D9 ; Inputs:
codeseg:98D9 ; DL = fill color
codeseg:98D9 ; AL = yPos ?? (More like last row)
codeseg:98D9 ; AH = xPos
codeseg:98D9 ; BH = yLen
codeseg:98D9 ; BL = xLen
codeseg:98D9
codeseg:98D9 AG_agi256FilledRect proc near ; CODE XREF: j_AG_agi256FilledRect�j
codeseg:98D9
codeseg:98D9 yLen = bh
codeseg:98D9 xLen = bl
codeseg:98D9
codeseg:98D9 push es
codeseg:98DA mov es, videoSeg
codeseg:98DE mov dh, dl
codeseg:98E0 sub al, yLen
codeseg:98E2 inc al
codeseg:98E4 mov cx, bx
codeseg:98E6 call agiToScreenCoords ; Calculates (baseY+Y)*320 + X*2
codeseg:98E6 ;
codeseg:98E6 ; Inputs: AL = Y, AH = X
codeseg:98E6 ; Reads from DS:[byte_B389] = baseY
codeseg:98E6 ; (Actually reads baseY as a word, but uses it like
codeseg:98E6 ; it can't overflow to over 8 bits when adding Y to it)
codeseg:98E6 ; Returns: DI = heightLUT[baseY+Y] + X*2 = (baseY+Y)*320 + X*2
codeseg:98E6 ; (Side-effects: BH = 0, BL = AH = X)
codeseg:98E9 mov bx, cx
codeseg:98EB mov ax, dx
codeseg:98ED mov dx, 320
codeseg:98F0 xor ch, ch
codeseg:98F2 sub dx, cx
codeseg:98F4 sub dx, cx
codeseg:98F6
codeseg:98F6 xLoop: ; CODE XREF: AG_agi256FilledRect+27�j
codeseg:98F6 mov cl, xLen
codeseg:98F8 repe stosw
codeseg:98FA dec yLen
codeseg:98FC jz end
codeseg:98FE add di, dx
codeseg:9900 jmp short xLoop
codeseg:9902 ; ---------------------------------------------------------------------------
codeseg:9902
codeseg:9902 end: ; CODE XREF: AG_agi256FilledRect+23�j
codeseg:9902 pop es
codeseg:9903 retn
codeseg:9903 AG_agi256FilledRect endp
codeseg:9903
codeseg:9904
codeseg:9904 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9904
codeseg:9904 ; In Sonneveld's Agi2917.idb there was j_EGAInit here.
codeseg:9904 ;
codeseg:9904 ; Precalculates table for Y*320 values (0 <= y < 200)
codeseg:9904
codeseg:9904 AG_calcHeightLUT proc near ; CODE XREF: j_AG_calcHeightLUT�j
codeseg:9904 lea di, ds:heightLUT
codeseg:9908 mov ax, 0
codeseg:990B mov dx, 200
codeseg:990E
codeseg:990E mulWidthLoop: ; CODE XREF: AG_calcHeightLUT+F�j
codeseg:990E stosw
codeseg:990F add ax, 320
codeseg:9912 dec dx
codeseg:9913 jnz mulWidthLoop
codeseg:9915 retn
codeseg:9915 AG_calcHeightLUT endp
codeseg:9915
codeseg:9916
codeseg:9916 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9916
codeseg:9916 ; To me this seems to blink the colors on the screen
codeseg:9916 ; syncronized to some event.
codeseg:9916 ;
codeseg:9916 ; setPalette(uint16 cx) {
codeseg:9916 ; read 16 colors from video card to ds:[palette]
codeseg:9916 ;
codeseg:9916 ; for (int z = 0; z < cx; z++) {
codeseg:9916 ; for (int y = 0; y < 20; y++) {
codeseg:9916 ; for (int i=0; i < 16*3; i++) {
codeseg:9916 ; ds:palette[i] ^= 0xff; // Inverts palette
codeseg:9916 ; }
codeseg:9916 ; write 16 colors to video card from ds:[palette]
codeseg:9916 ; wait for word_A139 to change (Loop until it does)
codeseg:9916 ; }
codeseg:9916 ; }
codeseg:9916 ; }
codeseg:9916
codeseg:9916 AG_blinkScreen proc near ; CODE XREF: cmd_shake_screen_110+2F�p
codeseg:9916 push bx
codeseg:9917 push si
codeseg:9918 push di
codeseg:9919 push es
codeseg:991A push dx
codeseg:991B mov ax, ds
codeseg:991D mov es, ax
codeseg:991F push cx
codeseg:9920 mov dx, offset palette
codeseg:9923 xor bx, bx
codeseg:9925 mov cx, 16 ; Read first 16 colors from video card
codeseg:9928 mov al, 17h
codeseg:992A mov ah, 10h
codeseg:992C int 10h ; - VIDEO - READ BLOCK OF DAC REGISTERS (EGA, VGA/MCGA)
codeseg:992C ; BX = starting palette register, CX = number of palette registers to read
codeseg:992C ; ES:DX -> buffer (3 * CX bytes in size)
codeseg:992C ; Return: CX number of red, green and blue triples in buffer
codeseg:992E pop cx
codeseg:992F
codeseg:992F outerLoop: ; CODE XREF: AG_blinkScreen+4C�j
codeseg:992F push cx ; At first run, CX's value at function start is pushed
codeseg:9930 mov cx, 20
codeseg:9933
codeseg:9933 loop20Times: ; CODE XREF: AG_blinkScreen+49�j
codeseg:9933 push cx ; At first run, 20 is pushed
codeseg:9934 mov bx, 47 ; 48/3 = 16 (Dealing with triples here)
codeseg:9937 mov al, 0FFh
codeseg:9939
codeseg:9939 invertPalette: ; CODE XREF: AG_blinkScreen+28�j
codeseg:9939 xor palette[bx], al ; Inverts 16 colors in palette and writes them to video card DAC
codeseg:993D dec bx
codeseg:993E jns invertPalette ; Inverts 16 colors in palette and writes them to video card DAC
codeseg:9940 mov dx, offset palette
codeseg:9943 xor bx, bx
codeseg:9945 mov cx, 16
codeseg:9948 mov al, 12h
codeseg:994A mov ah, 10h
codeseg:994C int 10h ; - VIDEO - SET BLOCK OF DAC REGISTERS (EGA, VGA/MCGA)
codeseg:994C ; BX = starting color register, CX = number of registers to set
codeseg:994C ; ES:DX -> table of 3*CX bytes where each 3 byte group represents one
codeseg:994C ; byte each of red, green and blue (0-63)
codeseg:994E mov cx, 1
codeseg:9951
codeseg:9951 neverLoopsHere: ; CODE XREF: AG_blinkScreen+46�j
codeseg:9951 mov bx, word_A139
codeseg:9955
codeseg:9955 waitForChange: ; CODE XREF: AG_blinkScreen+43�j
codeseg:9955 cmp bx, word_A139
codeseg:9959 jz waitForChange
codeseg:995B dec cx
codeseg:995C jnz neverLoopsHere ; This seems to never loop, so why is it here at all?
codeseg:995E pop cx
codeseg:995F loop loop20Times ; At first run, 20 is pushed
codeseg:9961 pop cx
codeseg:9962 loop outerLoop ; At first run, CX's value at function start is pushed
codeseg:9964 pop dx
codeseg:9965 pop es
codeseg:9966 pop di
codeseg:9967 pop si
codeseg:9968 pop bx
codeseg:9969 retn
codeseg:9969 AG_blinkScreen endp
codeseg:9969
codeseg:996A
codeseg:996A ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:996A
codeseg:996A ; Input: CX
codeseg:996A ; BH = CH = Y
codeseg:996A ; BL = CL/2 = X / 2
codeseg:996A ; SI += 160 (Go to right half of the 320x168 area)
codeseg:996A ; goto AG_stretchToScreen
codeseg:996A
codeseg:996A AG_convCoord proc near ; CODE XREF: AG_agi256PutBlock+1C�j
codeseg:996A mov bx, cx
codeseg:996C shr bl, 1
codeseg:996E add si, 160
codeseg:9972 jmp AG_stretchToScreen ; Copies data from agi256 picture segment to video memory with x2 horizontal stretching.
codeseg:9972 AG_convCoord endp ; Both source and destination buffers use a stride/pitch of 320 bytes.
codeseg:9972 ; Inputs:
codeseg:9972 ; BL = xLen
codeseg:9972 ; BH = yLen
codeseg:9972 ; SI = srcOffset
codeseg:9972 ; DI = destOffset
codeseg:9975
codeseg:9975 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9975
codeseg:9975 ; Command unknown 170
codeseg:9975 ;
codeseg:9975 ; In AGIDATA.OVL at offset 0x08C5 there's
codeseg:9975 ; dw offset CmdUnknown170 and now
codeseg:9975 ; it's 0x9975 which points to 0x9800 + 0x175,
codeseg:9975 ; so it's 0x175 in this file. So it points to this function.
codeseg:9975 ;
codeseg:9975 ; uint16 *cmdUnknown170(uint16 *varNum) {
codeseg:9975 ; uint8 var = agiVar[*varNum];
codeseg:9975 ; AG_readAgi256Pic(var);
codeseg:9975 ; return ++varNum;
codeseg:9975 ; }
codeseg:9975 ; Attributes: bp-based frame
codeseg:9975
codeseg:9975 AG_cmd_set_simple_170 proc near ; DATA XREF: dataseg:08C5�o
codeseg:9975
codeseg:9975 varNum = word ptr 8
codeseg:9975
codeseg:9975 push si
codeseg:9976 push di
codeseg:9977 push bp
codeseg:9978 mov bp, sp
codeseg:997A mov di, [bp+varNum] ; DI = varNum
codeseg:997D inc [bp+varNum] ; varNum++
codeseg:9980 mov al, [di] ; AL = [DS:DI] = [old varNum]
codeseg:9982 sub ah, ah ; AX = zero_extend(AL)
codeseg:9984 mov di, ax ; DI = [old varNum]
codeseg:9986 mov al, agiVar[di] ; AL = agiVar[[old varNum]]
codeseg:998A sub ah, ah
codeseg:998C push ax
codeseg:998D call AG_readAgi256Pic ; Reads an AGI 256 picture with the given number to
codeseg:998D ; agi256PicSeg so that the picture is a 160x168 picture in
codeseg:998D ; a 320x168 area, but in the right half of it
codeseg:998D ; (i.e. 168 <= x < 320 and 0 <= y < 168)
codeseg:9990 add sp, 2
codeseg:9993 mov ax, [bp+varNum]
codeseg:9996 pop bp
codeseg:9997 pop di
codeseg:9998 pop si
codeseg:9999 retn
codeseg:9999 AG_cmd_set_simple_170 endp
codeseg:9999
codeseg:999A
codeseg:999A ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:999A
codeseg:999A ; Reads an AGI 256 picture with the given number to
codeseg:999A ; agi256PicSeg so that the picture is a 160x168 picture in
codeseg:999A ; a 320x168 area, but in the right half of it
codeseg:999A ; (i.e. 168 <= x < 320 and 0 <= y < 168)
codeseg:999A ; Attributes: bp-based frame
codeseg:999A
codeseg:999A AG_readAgi256Pic proc near ; CODE XREF: AG_cmd_set_simple_170+18�p
codeseg:999A
codeseg:999A picNum = word ptr 4
codeseg:999A
codeseg:999A push bp
codeseg:999B mov bp, sp
codeseg:999D jmp jumpOverData
codeseg:999D ; ---------------------------------------------------------------------------
codeseg:99A0 aPicdir db 'PICDIR',0
codeseg:99A7 aVol_0 db 'VOL.0',0
codeseg:99AD tempBuf db 3 dup(0F0h)
codeseg:99B0 ; ---------------------------------------------------------------------------
codeseg:99B0
codeseg:99B0 jumpOverData: ; CODE XREF: AG_readAgi256Pic+3�j
codeseg:99B0 push ds
codeseg:99B1 mov cx, cs
codeseg:99B3 mov ds, cx
codeseg:99B5 assume ds:codeseg
codeseg:99B5 call $+3
codeseg:99B8
codeseg:99B8 loc_99B8: ; CODE XREF: cmd_shake_screen_110+17�p
codeseg:99B8 pop dx ; At first run, if called from 0x99B5
codeseg:99B8 ; DX = IP from the stack, which in turn is 0x99B8
codeseg:99B8 ; as it was the IP for the next instruction as call $+3 at 0x99B5 was made.
codeseg:99B9 sub dx, 18h ; Subtract 0x18 from given value.
codeseg:99B9 ; On first run it's 0x99B8 - 0x18 = 0x99A0 = offset "PICDIR"
codeseg:99BC mov ax, 3D00h
codeseg:99BF int 21h ; DOS - 2+ - OPEN DISK FILE WITH HANDLE
codeseg:99BF ; DS:DX -> ASCIZ filename
codeseg:99BF ; AL = access mode
codeseg:99BF ; 0 - read
codeseg:99C1 jnb fileOpenSuccess ; JNB = JNC
codeseg:99C1 ; AX = file handle if CF not set,
codeseg:99C1 ; AX = error code if CF is set
codeseg:99C3
codeseg:99C3 error: ; CODE XREF: AG_readAgi256Pic+3D�j
codeseg:99C3 ; AG_readAgi256Pic+4D�j ...
codeseg:99C3 pop ds
codeseg:99C4 assume ds:dataseg
codeseg:99C4 retn
codeseg:99C5 ; ---------------------------------------------------------------------------
codeseg:99C5
codeseg:99C5 fileOpenSuccess: ; CODE XREF: AG_readAgi256Pic+27�j
codeseg:99C5 mov bx, ax ; BX = AX = file handle of the picture directory file
codeseg:99C7 mov dx, [bp+picNum]
codeseg:99CA mov al, 3
codeseg:99CC mul dl ; AX = AL*DL = DL*3 = picNum*3
codeseg:99CE mov dx, ax ; DX = AX = picNum*3
codeseg:99D0 xor cx, cx ; Seek to position picNum*3 from beginning of file
codeseg:99D2 mov ax, 4200h ; Inputs: BX = file handle,
codeseg:99D2 ; CX = 16-bit MSB of bytes to move,
codeseg:99D2 ; DX = 16-bit LSB of bytes to move
codeseg:99D2 ; Returns:
codeseg:99D2 ; DX:AX = new pointer location if CF not set
codeseg:99D5 int 21h ; DOS - 2+ - MOVE FILE READ/WRITE POINTER (LSEEK)
codeseg:99D5 ; AL = method: offset from beginning of file
codeseg:99D7 jb error ; JC error
codeseg:99D9 call $+3
codeseg:99DC pop dx
codeseg:99DD sub dx, 2Fh ; '/' ; If called from 0x99D9 then after this subtraction
codeseg:99DD ; DX will be 0x99DC - 0x2F = 0x99AD = offset tempBuf
codeseg:99E0 mov cx, 3 ; Read three bytes from position picNum*3
codeseg:99E3 mov ah, 3Fh
codeseg:99E5 int 21h ; DOS - 2+ - READ FROM FILE WITH HANDLE
codeseg:99E5 ; BX = file handle, CX = number of bytes to read
codeseg:99E5 ; DS:DX -> buffer
codeseg:99E7 jb error
codeseg:99E9 mov ah, 3Eh
codeseg:99EB int 21h ; DOS - 2+ - CLOSE A FILE WITH HANDLE
codeseg:99EB ; BX = file handle
codeseg:99ED mov di, dx
codeseg:99EF mov al, [di]
codeseg:99F1 shr al, 4 ; AL = tempBuf[0]/16
codeseg:99F4 sub di, 2
codeseg:99F7 add [di], al ; Add tempBuf[0]/16 to "VOL.0" string's suffix (i.e. '0')
codeseg:99F7 ; so that it may become "VOL.0" - "VOL.9".
codeseg:99F9 sub dx, 6 ; DX = offset aVol_0
codeseg:99FC mov ax, 3D00h ; Open correct volume file (Some of "VOL.0" to "VOL.9")
codeseg:99FF int 21h ; DOS - 2+ - OPEN DISK FILE WITH HANDLE
codeseg:99FF ; DS:DX -> ASCIZ filename
codeseg:99FF ; AL = access mode
codeseg:99FF ; 0 - read
codeseg:9A01 jb error
codeseg:9A03 mov bx, ax ; BX = AX = file handle of the volume file
codeseg:9A05 mov di, dx
codeseg:9A07 add di, 6 ; DI = offset tempBuf
codeseg:9A0A xor ch, ch
codeseg:9A0C mov cl, [di]
codeseg:9A0E and cl, 0Fh ; CL = tempBuf[0] % 16
codeseg:9A11 inc di
codeseg:9A12 mov dh, [di] ; DH = tempBuf[1]
codeseg:9A14 inc di
codeseg:9A15 mov dl, [di] ; DL = tempBuf[2]
codeseg:9A17 mov ax, 4200h ; Inputs: BX = file handle,
codeseg:9A17 ; CX = 16-bit MSB of bytes to move,
codeseg:9A17 ; DX = 16-bit LSB of bytes to move
codeseg:9A17 ; Returns:
codeseg:9A17 ; DX:AX = new pointer location if CF not set
codeseg:9A1A int 21h ; DOS - 2+ - MOVE FILE READ/WRITE POINTER (LSEEK)
codeseg:9A1A ; AL = method: offset from beginning of file
codeseg:9A1C jb error
codeseg:9A1E mov ax, 4201h
codeseg:9A21 xor cx, cx
codeseg:9A23 mov dx, 5 ; Move 5 bytes onwards from current seeking location
codeseg:9A26 int 21h ; DOS - 2+ - MOVE FILE READ/WRITE POINTER (LSEEK)
codeseg:9A26 ; AL = method: offset from present location
codeseg:9A28 jb error
codeseg:9A2A pop ds
codeseg:9A2B push ds
codeseg:9A2C mov dx, agi256PicSeg
codeseg:9A30 mov ds, dx
codeseg:9A32 mov dx, 160 ; Start reading to agi256PicSeg:[160]
codeseg:9A35 mov cx, 168
codeseg:9A38
codeseg:9A38 readRow: ; CODE XREF: AG_readAgi256Pic+AB�j
codeseg:9A38 push cx ; Read 168 rows of 160 bytes each.
codeseg:9A39 mov cx, 160
codeseg:9A3C mov ah, 3Fh
codeseg:9A3E int 21h ; DOS - 2+ - READ FROM FILE WITH HANDLE
codeseg:9A3E ; BX = file handle, CX = number of bytes to read
codeseg:9A3E ; DS:DX -> buffer
codeseg:9A40 add dx, 320 ; Go to next row by adding 320 to destination pointer
codeseg:9A44 pop cx
codeseg:9A45 loop readRow ; Read 168 rows of 160 bytes each.
codeseg:9A47 mov ah, 3Eh
codeseg:9A49 int 21h ; DOS - 2+ - CLOSE A FILE WITH HANDLE
codeseg:9A49 ; BX = file handle
codeseg:9A4B pop ds
codeseg:9A4C pop bp
codeseg:9A4D retn
codeseg:9A4D AG_readAgi256Pic endp
codeseg:9A4D
codeseg:9A4E ; ---------------------------------------------------------------------------
codeseg:9A4E
codeseg:9A4E loc_9A4E:
codeseg:9A4E nop
codeseg:9A4F
codeseg:9A4F ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9A4F
codeseg:9A4F ; Sets and/or clears current pixel bits
codeseg:9A4F ; AL = ES:[DI] = PIXEL
codeseg:9A4F ; (PIXEL |= BH) &= BL
codeseg:9A4F
codeseg:9A4F AG_setClrCurrPixel proc near ; CODE XREF: _SBuffXLine+2A�p
codeseg:9A4F ; _SBuffYLine+3C�p ...
codeseg:9A4F mov al, es:[di]
codeseg:9A52 or al, bh
codeseg:9A54 and al, bl
codeseg:9A56 mov es:[di], al
codeseg:9A59 retn
codeseg:9A59 AG_setClrCurrPixel endp
codeseg:9A59
codeseg:9A5A
codeseg:9A5A ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9A5A
codeseg:9A5A ; Was _WindowLineClr in Sonneveld's Agi2917.idb
codeseg:9A5A ;
codeseg:9A5A ; Clears first 8 rows (320*8 bytes) of video memory
codeseg:9A5A ; with white pixels (Color 15).
codeseg:9A5A
codeseg:9A5A AG_setWhiteMenuBar proc near ; CODE XREF: _StatLineWrite+1A�p
codeseg:9A5A ; sub_93D1+1C�p
codeseg:9A5A push cx
codeseg:9A5B push es
codeseg:9A5C push di
codeseg:9A5D push ax
codeseg:9A5E mov ax, 0A000h
codeseg:9A61 mov es, ax
codeseg:9A63 assume es:nothing
codeseg:9A63 xor di, di
codeseg:9A65 mov ax, 0F0Fh
codeseg:9A68 mov cx, (320*8)/2
codeseg:9A6B repe stosw
codeseg:9A6D pop ax
codeseg:9A6E pop di
codeseg:9A6F pop es
codeseg:9A70 assume es:dataseg
codeseg:9A70 pop cx
codeseg:9A71 retn
codeseg:9A71 AG_setWhiteMenuBar endp
codeseg:9A71
codeseg:9A71 ; ---------------------------------------------------------------------------
codeseg:9A72 byte_9A72 db 33Eh dup(0)
Disassembly of AGIOBJS.OVL
codeseg:9DB0 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9DB0
codeseg:9DB0 ; AGIOBJS.OVL starts here at 0x9DB0
codeseg:9DB0 ; Attributes: thunk
codeseg:9DB0
codeseg:9DB0 j_AO_agi256_saveArea proc near ; CODE XREF: sub_45E+15�p
codeseg:9DB0 ; sub_5EDB+E4�p
codeseg:9DB0 jmp AO_agi256_saveArea ; savearea(struct Sprite *s) {
codeseg:9DB0 j_AO_agi256_saveArea endp ; int srcOffset = screenOffset(s->xPos, s->yPos);
codeseg:9DB0 ; uint8 *src = agi256PicSeg[srcOffset + 160];
codeseg:9DB0 ; for (int y = 0; y < s->ySize; y++)
codeseg:9DB0 ; memcpy(s->buffer + s->xSize * y, src + 320 * y, s->xSize);
codeseg:9DB0 ; }
codeseg:9DB3
codeseg:9DB3 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9DB3
codeseg:9DB3 ; Attributes: thunk
codeseg:9DB3
codeseg:9DB3 j_AO_agi256_restoreArea proc near ; CODE XREF: sub_307+13�p
codeseg:9DB3 ; sub_5EDB+121�p
codeseg:9DB3 jmp AO_agi256_restoreArea ; restoreArea(struct Sprite *s) {
codeseg:9DB3 j_AO_agi256_restoreArea endp ; int destOffset = screenOffset(s->xPos, s->yPos);
codeseg:9DB3 ; uint8 *dest = &agi256PicSeg[destOffset + 160];
codeseg:9DB3 ; for (int y = 0; y < s->ySize; y++)
codeseg:9DB3 ; memcpy(dest + 320 * y, s->buffer + s->xSize * y, s->xSize);
codeseg:9DB3 ; }
codeseg:9DB6
codeseg:9DB6 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9DB6
codeseg:9DB6 ; Attributes: thunk
codeseg:9DB6
codeseg:9DB6 j_AO_agi256_blit proc near ; CODE XREF: sub_45E+1E�p
codeseg:9DB6 ; sub_57CF+22�p ...
codeseg:9DB6 jmp AO_agi256_blit
codeseg:9DB6 j_AO_agi256_blit endp
codeseg:9DB6
codeseg:9DB9
codeseg:9DB9 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9DB9
codeseg:9DB9 ; savearea(struct Sprite *s) {
codeseg:9DB9 ; int srcOffset = screenOffset(s->xPos, s->yPos);
codeseg:9DB9 ; uint8 *src = agi256PicSeg[srcOffset + 160];
codeseg:9DB9 ; for (int y = 0; y < s->ySize; y++)
codeseg:9DB9 ; memcpy(s->buffer + s->xSize * y, src + 320 * y, s->xSize);
codeseg:9DB9 ; }
codeseg:9DB9 ; Attributes: bp-based frame
codeseg:9DB9
codeseg:9DB9 AO_agi256_saveArea proc near ; CODE XREF: j_AO_agi256_saveArea�j
codeseg:9DB9
codeseg:9DB9 spritePtr = word ptr 8
codeseg:9DB9
codeseg:9DB9 push si
codeseg:9DBA push di
codeseg:9DBB push bp
codeseg:9DBC mov bp, sp
codeseg:9DBE sub sp, 2
codeseg:9DC1 mov bp, [bp+spritePtr]
codeseg:9DC4 mov al, byte ptr [bp+Sprite.yPos] ; At some places only lowest 8 bits are used
codeseg:9DC7 mov ah, byte ptr [bp+Sprite.xPos] ; At some places only lowest 8 bits are used
codeseg:9DCA call screenOffset ; Calculates the screen offset for given coordinate? Video or AGI screen offset?
codeseg:9DCA ; DI = AL * 320 + AH
codeseg:9DCA ; (Destroys BX contents (Returns with BH = 0, BL = AH))
codeseg:9DCA ;
codeseg:9DCA ; Maybe not named quite correctly?
codeseg:9DCD mov si, di
codeseg:9DCF mov ah, byte ptr [bp+Sprite.ySize] ; At some places only lowest 8 bits are used
codeseg:9DD2 mov al, byte ptr [bp+Sprite.xSize] ; At some places only lowest 8 bits are used
codeseg:9DD5 mov di, [bp+Sprite.buffer]
codeseg:9DD8 push ds
codeseg:9DD9 mov ds, agi256PicSeg
codeseg:9DDD xor dx, dx
codeseg:9DDF mov cx, dx
codeseg:9DE1 jmp AO_agi256_saveArea_loop_init ; DX = 320 - Sprite.xSize (AL)
codeseg:9DE1 AO_agi256_saveArea endp ; SI += 160 (This is done in part 2 of the loop init, actually)
codeseg:9DE1 ; This is elsewhere than directly inside AO_agi256_saveArea
codeseg:9DE1 ; probably because it didn't fit otherwise. Returns to AO_agi256_saveArea_loop
codeseg:9DE1 ; (Although calls AO_agi256_saveArea_loop_init_part2 first)
codeseg:9DE4 ; ---------------------------------------------------------------------------
codeseg:9DE4 nop
codeseg:9DE5 nop
codeseg:9DE6
codeseg:9DE6 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9DE6
codeseg:9DE6 ; Loop in pseudo C:
codeseg:9DE6 ; for (int y = 0; y < Sprite.ySize; y++) {
codeseg:9DE6 ; memcpy(ES:DI, DS:SI, Sprite.xSize);
codeseg:9DE6 ; SI += 320;
codeseg:9DE6 ; DI += Sprite.xSize;
codeseg:9DE6 ; }
codeseg:9DE6
codeseg:9DE6 AO_agi256_saveArea_loop proc near ; CODE XREF: AO_agi256_saveArea_loop+8�j
codeseg:9DE6 ; AO_agi256_saveArea_loop_init_part2+4�j
codeseg:9DE6 mov cl, al ; Move Sprite.xSize bytes per row
codeseg:9DE8 repe movsb ; Move the bytes from DS:SI to ES:DI
codeseg:9DEA add si, dx ; Move to the next row
codeseg:9DEA ; repe movsb added Sprite.xSize to SI
codeseg:9DEA ; add si,dx adds (320 - Sprite.xSize) to SI
codeseg:9DEA ; so the addition is Sprite.xSize + (320 - Sprite.xSize) = 320
codeseg:9DEC dec ah ; Loop Sprite.ySize times
codeseg:9DEE jnz AO_agi256_saveArea_loop ; Loop in pseudo C:
codeseg:9DEE ; for (int y = 0; y < Sprite.ySize; y++) {
codeseg:9DEE ; memcpy(ES:DI, DS:SI, Sprite.xSize);
codeseg:9DEE ; SI += 320;
codeseg:9DEE ; DI += Sprite.xSize;
codeseg:9DEE ; }
codeseg:9DF0 pop ds
codeseg:9DF1 add sp, 2
codeseg:9DF4 pop bp
codeseg:9DF5 pop di
codeseg:9DF6 pop si
codeseg:9DF7 retn
codeseg:9DF7 AO_agi256_saveArea_loop endp ; sp = 0Ah
codeseg:9DF7
codeseg:9DF8
codeseg:9DF8 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9DF8
codeseg:9DF8 ; restoreArea(struct Sprite *s) {
codeseg:9DF8 ; int destOffset = screenOffset(s->xPos, s->yPos);
codeseg:9DF8 ; uint8 *dest = &agi256PicSeg[destOffset + 160];
codeseg:9DF8 ; for (int y = 0; y < s->ySize; y++)
codeseg:9DF8 ; memcpy(dest + 320 * y, s->buffer + s->xSize * y, s->xSize);
codeseg:9DF8 ; }
codeseg:9DF8 ; Attributes: bp-based frame
codeseg:9DF8
codeseg:9DF8 AO_agi256_restoreArea proc near ; CODE XREF: j_AO_agi256_restoreArea�j
codeseg:9DF8
codeseg:9DF8 spritePtr = word ptr 8
codeseg:9DF8
codeseg:9DF8 push si
codeseg:9DF9 push di
codeseg:9DFA push bp
codeseg:9DFB mov bp, sp
codeseg:9DFD sub sp, 2
codeseg:9E00 mov bp, [bp+spritePtr]
codeseg:9E03 mov al, byte ptr [bp+Sprite.yPos] ; At some places only lowest 8 bits are used
codeseg:9E06 mov ah, byte ptr [bp+Sprite.xPos] ; At some places only lowest 8 bits are used
codeseg:9E09 call screenOffset ; Calculates the screen offset for given coordinate? Video or AGI screen offset?
codeseg:9E09 ; DI = AL * 320 + AH
codeseg:9E09 ; (Destroys BX contents (Returns with BH = 0, BL = AH))
codeseg:9E09 ;
codeseg:9E09 ; Maybe not named quite correctly?
codeseg:9E0C mov si, [bp+Sprite.buffer]
codeseg:9E0F mov ah, byte ptr [bp+Sprite.ySize] ; At some places only lowest 8 bits are used
codeseg:9E12 mov al, byte ptr [bp+Sprite.xSize] ; At some places only lowest 8 bits are used
codeseg:9E15 push es
codeseg:9E16 mov es, agi256PicSeg
codeseg:9E1A xor dx, dx
codeseg:9E1C mov cx, dx
codeseg:9E1E jmp AO_agi256_restoreArea_loop_init ; DX = 320 - Sprite.xSize (AL)
codeseg:9E1E AO_agi256_restoreArea endp ; DI += 160
codeseg:9E1E ; This is elsewhere than directly inside AO_agi256_restoreArea
codeseg:9E1E ; probably because it didn't fit otherwise. Returns to AO_agi256_restoreArea_loop
codeseg:9E21 ; ---------------------------------------------------------------------------
codeseg:9E21 nop
codeseg:9E22 nop
codeseg:9E23
codeseg:9E23 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9E23
codeseg:9E23 ; Loop in pseudo C:
codeseg:9E23 ; for (int y = 0; y < Sprite.ySize; y++) {
codeseg:9E23 ; memcpy(ES:DI, DS:SI, Sprite.xSize);
codeseg:9E23 ; DI += 320;
codeseg:9E23 ; SI += Sprite.xSize;
codeseg:9E23 ; }
codeseg:9E23
codeseg:9E23 AO_agi256_restoreArea_loop proc near ; CODE XREF: AO_agi256_restoreArea_loop+8�j
codeseg:9E23 ; AO_agi256_restoreArea_loop_init+D�j
codeseg:9E23 mov cl, al ; Move Sprite.xSize bytes per row
codeseg:9E25 repe movsb ; Move the bytes from DS:SI to ES:DI
codeseg:9E27 add di, dx ; Move to the next row
codeseg:9E27 ; repe movsb added Sprite.xSize to DI
codeseg:9E27 ; add di,dx adds (320 - Sprite.xSize) to DI
codeseg:9E27 ; so the addition is Sprite.xSize + (320 - Sprite.xSize) = 320
codeseg:9E29 dec ah
codeseg:9E2B jnz AO_agi256_restoreArea_loop ; Loop in pseudo C:
codeseg:9E2B ; for (int y = 0; y < Sprite.ySize; y++) {
codeseg:9E2B ; memcpy(ES:DI, DS:SI, Sprite.xSize);
codeseg:9E2B ; DI += 320;
codeseg:9E2B ; SI += Sprite.xSize;
codeseg:9E2B ; }
codeseg:9E2D pop es
codeseg:9E2E add sp, 2
codeseg:9E31 pop bp
codeseg:9E32 pop di
codeseg:9E33 pop si
codeseg:9E34 retn
codeseg:9E34 AO_agi256_restoreArea_loop endp ; sp = 0Ah
codeseg:9E34
codeseg:9E35
codeseg:9E35 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9E35
codeseg:9E35 ; Attributes: bp-based frame
codeseg:9E35
codeseg:9E35 AO_agi256_blit proc near ; CODE XREF: j_AO_agi256_blit�j
codeseg:9E35
codeseg:9E35 structPtr = word ptr 8
codeseg:9E35 arg_1C = byte ptr 24h
codeseg:9E35
codeseg:9E35 push si
codeseg:9E36 push di
codeseg:9E37 push bp
codeseg:9E38 mov bp, sp
codeseg:9E3A sub sp, 2
codeseg:9E3D mov bp, [bp+structPtr]
codeseg:9E40 mov al, [bp+2]
codeseg:9E43 push ax
codeseg:9E44 mov si, [bp+10h]
codeseg:9E47 test byte ptr [si+2], 80h
codeseg:9E4B jz dontMirror
codeseg:9E4D push bp
codeseg:9E4E call _BlitMirrorCell
codeseg:9E51 pop bp
codeseg:9E52 mov si, [bp+10h]
codeseg:9E55
codeseg:9E55 dontMirror: ; CODE XREF: AO_agi256_blit+16�j
codeseg:9E55 inc si
codeseg:9E56 lodsw
codeseg:9E57 mov dx, ax
codeseg:9E59 mov ah, byte ptr [bp+blitStruc.xPos]
codeseg:9E5C mov al, byte ptr [bp+blitStruc.yPos]
codeseg:9E5F sub al, dl
codeseg:9E61 inc al
codeseg:9E63 call screenOffset ; Calculates the screen offset for given coordinate? Video or AGI screen offset?
codeseg:9E63 ; DI = AL * 320 + AH
codeseg:9E63 ; (Destroys BX contents (Returns with BH = 0, BL = AH))
codeseg:9E63 ;
codeseg:9E63 ; Maybe not named quite correctly?
codeseg:9E66 shl dh, 1
codeseg:9E68 shl dh, 1
codeseg:9E6A shl dh, 1
codeseg:9E6C shl dh, 1 ; DH *= 16
codeseg:9E6E push es
codeseg:9E6F mov es, agi256PicSeg
codeseg:9E73 mov bl, 1
codeseg:9E75 mov bh, [bp+arg_1C]
codeseg:9E78 shl bh, 1
codeseg:9E7A shl bh, 1
codeseg:9E7C shl bh, 1
codeseg:9E7E shl bh, 1 ; BH *= 16
codeseg:9E80 mov bp, di
codeseg:9E82 xor cx, cx
codeseg:9E84 jmp short startBlit ; Read byte from DS:[SI++]
codeseg:9E86 ; ---------------------------------------------------------------------------
codeseg:9E86 nop
codeseg:9E87
codeseg:9E87 ah_eq_dh: ; CODE XREF: AO_agi256_blit+61�j
codeseg:9E87 cbw ; Sign extend AL to AX (0 <= AL <= 0x0F, so AH = 0)
codeseg:9E88 add di, ax ; DI += AX
codeseg:9E8A
codeseg:9E8A startBlit: ; CODE XREF: AO_agi256_blit+4F�j
codeseg:9E8A ; AO_agi256_blit+83�j ...
codeseg:9E8A lodsb ; Read byte from DS:[SI++]
codeseg:9E8B or al, al
codeseg:9E8D jz zeroByte ; Jump if it's zero
codeseg:9E8F mov ah, al ; Double the pixel
codeseg:9E91 and ax, 0F00Fh ; Make lower nibble of AL contain pixel's color info and
codeseg:9E91 ; upper nibble of AH contain pixel's priority/control info
codeseg:9E94 cmp ah, dh
codeseg:9E96 jz ah_eq_dh ; Sign extend AL to AX (0 <= AL <= 0x0F, so AH = 0)
codeseg:9E98 mov cl, al
codeseg:9E9A shr ah, 1
codeseg:9E9C shr ah, 1
codeseg:9E9E shr ah, 1
codeseg:9EA0 shr ah, 1 ; Bring priority/control info to lower nibble of AH
codeseg:9EA2
codeseg:9EA2 xLoop: ; CODE XREF: AO_agi256_blit+81�j
codeseg:9EA2 ; AO_agi256_blit+B1�j
codeseg:9EA2 mov al, es:[di] ; Read pixel
codeseg:9EA5 and al, 0F0h ; Leave only the priority/control info
codeseg:9EA7 cmp al, 2 shl 4
codeseg:9EA9 jbe controlByte012 ; Jump if pixel's control info is 0, 1 or 2
codeseg:9EAB cmp al, bh
codeseg:9EAD ja priGreaterThanBH
codeseg:9EAF mov al, bh ; AL <= BH so
codeseg:9EAF ; AL = BH <=> AL = MAX(AL, BH)
codeseg:9EB1
codeseg:9EB1 loc_9EB1: ; CODE XREF: AO_agi256_blit+AE�j
codeseg:9EB1 or al, ah ; AL |= AH
codeseg:9EB3 jmp AO_agi256_blit_sub ; ES:[160 + DI++] = AL & 0x0F;
codeseg:9EB3 ; BL = 0;
codeseg:9EB6 ; ---------------------------------------------------------------------------
codeseg:9EB6
codeseg:9EB6 afterBlitSubCall: ; CODE XREF: AO_agi256_blit_sub+D�j
codeseg:9EB6 loop xLoop ; Read pixel
codeseg:9EB8 jmp short startBlit ; Read byte from DS:[SI++]
codeseg:9EBA ; ---------------------------------------------------------------------------
codeseg:9EBA
codeseg:9EBA zeroByte: ; CODE XREF: AO_agi256_blit+58�j
codeseg:9EBA dec dl ; DL--
codeseg:9EBC jz zeroDL
codeseg:9EBE add bp, 320
codeseg:9EC2 mov di, bp
codeseg:9EC4 jmp short startBlit ; Read byte from DS:[SI++]
codeseg:9EC6 ; ---------------------------------------------------------------------------
codeseg:9EC6
codeseg:9EC6 controlByte012: ; CODE XREF: AO_agi256_blit+74�j
codeseg:9EC6 push di
codeseg:9EC7 xor ch, ch
codeseg:9EC9
codeseg:9EC9 loc_9EC9: ; CODE XREF: AO_agi256_blit+A7�j
codeseg:9EC9 cmp di, 0D0C0h
codeseg:9ECD jnb loc_9EDE
codeseg:9ECF add di, 320
codeseg:9ED3 mov ch, es:[di]
codeseg:9ED6 and ch, 0F0h
codeseg:9ED9 cmp ch, 20h ; ' '
codeseg:9EDC jbe loc_9EC9
codeseg:9EDE
codeseg:9EDE loc_9EDE: ; CODE XREF: AO_agi256_blit+98�j
codeseg:9EDE pop di
codeseg:9EDF cmp ch, bh
codeseg:9EE1 mov ch, 0
codeseg:9EE3 jbe loc_9EB1 ; AL |= AH
codeseg:9EE5
codeseg:9EE5 priGreaterThanBH: ; CODE XREF: AO_agi256_blit+78�j
codeseg:9EE5 inc di
codeseg:9EE6 loop xLoop ; Read pixel
codeseg:9EE8 jmp short startBlit ; Read byte from DS:[SI++]
codeseg:9EEA ; ---------------------------------------------------------------------------
codeseg:9EEA
codeseg:9EEA zeroDL: ; CODE XREF: AO_agi256_blit+87�j
codeseg:9EEA pop es
codeseg:9EEB pop ax
codeseg:9EEC or al, al
codeseg:9EEE jnz zeroDL_notZeroAL
codeseg:9EF0 mov al, 1 ; f1 = Ego is invisible on the screen (Completely obscured by another object)
codeseg:9EF2 test bl, bl
codeseg:9EF4 jnz notZeroBL ; Hide ego (Set ego as invisible)
codeseg:9EF6 call _ResetFlagAL ; Show ego (Set ego as visible i.e. not invisible)
codeseg:9EF9 jmp short zeroDL_notZeroAL
codeseg:9EFB ; ---------------------------------------------------------------------------
codeseg:9EFB
codeseg:9EFB notZeroBL: ; CODE XREF: AO_agi256_blit+BF�j
codeseg:9EFB call _SetFlagAL ; Hide ego (Set ego as invisible)
codeseg:9EFE
codeseg:9EFE zeroDL_notZeroAL: ; CODE XREF: AO_agi256_blit+B9�j
codeseg:9EFE ; AO_agi256_blit+C4�j
codeseg:9EFE add sp, 2
codeseg:9F01 pop bp
codeseg:9F02 pop di
codeseg:9F03 pop si
codeseg:9F04 retn
codeseg:9F04 AO_agi256_blit endp
codeseg:9F04
codeseg:9F05
codeseg:9F05 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9F05
codeseg:9F05 ; DX = 320 - Sprite.xSize (AL)
codeseg:9F05 ; SI += 160 (This is done in part 2 of the loop init, actually)
codeseg:9F05 ; This is elsewhere than directly inside AO_agi256_saveArea
codeseg:9F05 ; probably because it didn't fit otherwise. Returns to AO_agi256_saveArea_loop
codeseg:9F05 ; (Although calls AO_agi256_saveArea_loop_init_part2 first)
codeseg:9F05
codeseg:9F05 AO_agi256_saveArea_loop_init proc near ; CODE XREF: AO_agi256_saveArea+28�j
codeseg:9F05 mov dx, 320
codeseg:9F08 push ax
codeseg:9F09 xor ah, ah
codeseg:9F0B sub dx, ax ; DX = 320 - Sprite.xSize
codeseg:9F0D pop ax
codeseg:9F0E jmp AO_agi256_saveArea_loop_init_part2 ; This is elsewhere than directly inside AO_agi256_saveArea_loop_init
codeseg:9F0E AO_agi256_saveArea_loop_init endp ; probably because it didn't fit otherwise. Returns to AO_agi256_saveArea_loop
codeseg:9F0E
codeseg:9F11
codeseg:9F11 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9F11
codeseg:9F11 ; DX = 320 - Sprite.xSize (AL)
codeseg:9F11 ; DI += 160
codeseg:9F11 ; This is elsewhere than directly inside AO_agi256_restoreArea
codeseg:9F11 ; probably because it didn't fit otherwise. Returns to AO_agi256_restoreArea_loop
codeseg:9F11
codeseg:9F11 AO_agi256_restoreArea_loop_init proc near
codeseg:9F11 ; CODE XREF: AO_agi256_restoreArea+26�j
codeseg:9F11 mov dx, 320
codeseg:9F14 push ax
codeseg:9F15 xor ah, ah
codeseg:9F17 sub dx, ax
codeseg:9F19 pop ax
codeseg:9F1A add di, 160
codeseg:9F1E jmp AO_agi256_restoreArea_loop ; Loop in pseudo C:
codeseg:9F1E AO_agi256_restoreArea_loop_init endp ; for (int y = 0; y < Sprite.ySize; y++) {
codeseg:9F1E ; memcpy(ES:DI, DS:SI, Sprite.xSize);
codeseg:9F1E ; DI += 320;
codeseg:9F1E ; SI += Sprite.xSize;
codeseg:9F1E ; }
codeseg:9F21
codeseg:9F21 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9F21
codeseg:9F21 ; This is elsewhere than directly inside AO_agi256_saveArea_loop_init
codeseg:9F21 ; probably because it didn't fit otherwise. Returns to AO_agi256_saveArea_loop
codeseg:9F21
codeseg:9F21 AO_agi256_saveArea_loop_init_part2 proc near
codeseg:9F21 ; CODE XREF: AO_agi256_saveArea_loop_init+9�j
codeseg:9F21 add si, 160
codeseg:9F25 jmp AO_agi256_saveArea_loop ; Loop in pseudo C:
codeseg:9F25 AO_agi256_saveArea_loop_init_part2 endp ; for (int y = 0; y < Sprite.ySize; y++) {
codeseg:9F25 ; memcpy(ES:DI, DS:SI, Sprite.xSize);
codeseg:9F25 ; SI += 320;
codeseg:9F25 ; DI += Sprite.xSize;
codeseg:9F25 ; }
codeseg:9F28
codeseg:9F28 ; ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦ S U B R O U T I N E ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
codeseg:9F28
codeseg:9F28 ; ES:[160 + DI++] = AL & 0x0F;
codeseg:9F28 ; BL = 0;
codeseg:9F28
codeseg:9F28 AO_agi256_blit_sub proc near ; CODE XREF: AO_agi256_blit+7E�j
codeseg:9F28 add di, 160
codeseg:9F2C and al, 0Fh
codeseg:9F2E stosb
codeseg:9F2F sub di, 160
codeseg:9F33 xor bl, bl
codeseg:9F35 jmp afterBlitSubCall
codeseg:9F35 AO_agi256_blit_sub endp
codeseg:9F35
codeseg:9F35 ; ---------------------------------------------------------------------------
codeseg:9F38 db 0D8h dup(0)
codeseg:9F38 codeseg ends
codeseg:9F38
Differences between AGI v2.936's AGI.EXE and AGI256's hacked AGI.EXE
Disclaimer
This is a raw info dump from a personal file so things may be funny, wrong, weird or <insert your favorite adjective here> but there are details to be sure:
The raw info dump
Differences between original Sierra On-Line's AGI interpreter version 2.936
and the hacked AGI256's AGI.EXE:
/////////////////////////////////////////////////////////////////////////////
Copyright string changed and some other bytes...
not 100% sure if they are used or not... let's see.
If changed bytes from seg000:0065 to seg000:0077 to all zeroes and to all semirandomly
typed in numbers and all it did was that it made the AGI256 demo have some white color
pixels where they shouldn't be in the Larry's bar screen. So... it may very well be that they're used.
NOTE THAT: E8 49 00 = call sub_C4 = db 'FI',0
AND there's a real subroutine starting at seg000:00C4 so it might be used as code!
- ORIGINAL 2.936 INTERPRETER:
seg000:0000 aAdventureGameI db 'Adventure Game Interpreter',0Dh,0Ah
seg000:0000 ; DATA XREF: seg001:0000�o
seg000:0000 ; sub_401D+59�r ...
seg000:0000 db 'Copyright (C) 1984, 1985, 1986 Sierra On-Line, Inc.',0Dh,0Ah
seg000:0000 db 'Authors: Jeff Stephenson & Chris Iden',0Dh,0Ah
seg000:0000 db 'FI',0
-> AGI256 INTERPRETER:
seg000:0000 aAgi256ColorsCS db 'AGI 256 colors ',0Dh,0Ah ; DATA XREF: seg001:0000�o
seg000:0000 ; sub_401D+59�r ...
seg000:0000 db '(C) Sierra On-Line - by Jeff Stephenson and Chris Iden',0Dh,0Ah
seg000:0000 db 'Hacked by Dark Minister',0Dh,0Ah
seg000:0000 db 'FI',0
seg000:0065 db 87h ; Unknown data from 0x0065 to 0x0077
seg000:0066 db 49h ; I
seg000:0067 db 29h ; )
seg000:0068 db 23h ; # ; DATA XREF: sub_4125+12�r
seg000:0068 ; sub_4125+27�r ...
seg000:0069 db 92h
seg000:006A db 99h
seg000:006B db 99h
seg000:006C db 11h
seg000:006D db 11h ;
seg000:006E db 11h
seg000:006F db 19h ;
seg000:0070 db 88h
seg000:0071 db 37h ; 7
seg000:0072 db 83h
seg000:0073 db 83h ; â
seg000:0074 db 73h ; s
seg000:0075 db 87h ; ç
seg000:0076 db 38h ; 8
seg000:0077 db 83h ; â
/////////////////////////////////////////////////////////////////////////////
In function _StatLineWrite (Function name taken from Agi2917.idb):
Changes _WindowLineClr call to setWhiteMenuBar call
which clears first 8 rows of video memory with white.
So changes the code that clears the status line before writing to it.
Rationale:
Probably because of wanting VGA support.
- ORIGINAL 2.936 INTERPRETER:
seg000:34D7 E8 CC F6 call sub_2BA6 ; _WindowLineClr in Agi2917.idb
-> AGI256 INTERPRETER:
seg000:34D7 E8 80 65 call near ptr 9A5Ah
0x9A5A - 0x9800 = 0x025A in the AGIGRAF.OVL:
seg000:025A ; Clears first 8 rows (320*8 bytes) of video memory
seg000:025A ; with white pixels (Color 15).
seg000:025A
seg000:025A setWhiteMenuBar proc near
seg000:025A push cx
seg000:025B push es
seg000:025C push di
seg000:025D push ax
seg000:025E mov ax, 0A000h
seg000:0261 mov es, ax
seg000:0263 assume es:nothing
seg000:0263 xor di, di
seg000:0265 mov ax, 0F0Fh
seg000:0268 mov cx, 500h
seg000:026B repe stosw
seg000:026D pop ax
seg000:026E pop di
seg000:026F pop es
seg000:0270 assume es:nothing
seg000:0270 pop cx
seg000:0271 retn
seg000:0271 setWhiteMenuBar endp
/////////////////////////////////////////////////////////////////////////////
In _ArrangeMem (Name from Agi2917.idb):
Changed to allocating twice the memory than with the original interpreter.
Saves the allocated memory's segment to SBuff_Seg in Agi2917.idb and
to agi256PicSeg in AGI256's disassembly.
Rationale:
Need another screen besides the 16 color & control line & priority info screen
for 256 color info so that doubles the memory need.
0x690 in paragraphs (16 bytes) is 160*168 bytes.
0xD20 is twice that.
- ORIGINAL 2.936 INTERPRETER:
seg000:4240 mov bx, 690h
-> AGI256 INTERPRETER:
seg000:4240 mov bx, 0D20h
/////////////////////////////////////////////////////////////////////////////
In _ArrangeMem (Name from Agi2917.idb):
Changed to allocating twice the memory than with the original interpreter.
Saves the allocated memory's segment to wHGCFontData in Agi2917.idb.
Rationale:
Don't really know. Maybe not needed at all? Or it's also possible that the
wHGCFontData is not a correct name for the variable and/or the allocate
area is used for something else and Hercules font data.
0x690 in paragraphs (16 bytes) is 160*168 bytes.
0xD20 is twice that.
- ORIGINAL 2.936 INTERPRETER:
seg000:4259 add ax, 690h
-> AGI256 INTERPRETER:
seg000:4259 add ax, 0D20h
/////////////////////////////////////////////////////////////////////////////
In an AGI screen buffer filling function (_SBuffClear in Agi2917.idb):
Fills the AGI screen buffer with AX contents. Filling space doubled in AGI256.
(There's some obsolete Hercules code in this function, but it's not used so
it doesn't matter).
Use cases:
AX = 0x4040 (Fill with lowest priority i.e. 4 and black color i.e. 0).
AX = 0x4F4F (Fill with lowest priority i.e. 4 and white color i.e. 15).
Rationale:
Needed because the 256 color screen and the normal 16 color screen are
horizontally adjacent. Probably only needed for clearing the 16 color
screen because the 256 color screen is always fully filled when loading
an AGI256 picture resource into it.
160*168 = 0x3480 * 2
160*168*2 = 0x6900 * 2
There's a repe stosw using cx after this instruction.
- ORIGINAL 2.936 INTERPRETER:
seg000:525E mov cx, 3480h
-> AGI256 INTERPRETER:
seg000:525E mov cx, 6900h
/////////////////////////////////////////////////////////////////////////////
In _SBuffXLine (Name from Agi2917.idb):
Changes direct pixel manipulation code to a function call.
Functionally changes nothing as the called function is functionally
identical to the code that was replaced.
Rationale:
Maybe not needed at all? Maybe some leftover modification that wasn't used
after all?
0x9A4F must be pointing to:
seg000:024E ; Sets and/or clears current pixel bits
seg000:024E ; AL = ES:[DI] = PIXEL
seg000:024E ; (PIXEL |= BH) &= BL
seg000:024E
seg000:024E setClrCurrPixel proc near
seg000:024E nop
seg000:024F mov al, es:[di]
seg000:0252 or al, bh
seg000:0254 and al, bl
seg000:0256 mov es:[di], al
seg000:0259 retn
seg000:0259 setClrCurrPixel endp
in AGIGRAF.OVL! So that makes their relocation value 0x9A4F - 0x24E = 0x9801...
wait... that's not even... let's see, there's a nop in setClrCurrPixel's start.
Let's throw that away so we'd jump right into 0x24F so the relocation value
would be 0x9A4F - 0x24E = 0x9800... now that's better :-).
- ORIGINAL 2.936 INTERPRETER:
seg000:5298 loc_5298: ; CODE XREF: sub_526F+34�j
seg000:5298 inc di
seg000:5299 mov al, es:[di] ; CHANGED
seg000:529C or al, bh ; CHANGED
seg000:529E and al, bl ; CHANGED
seg000:52A0 mov es:[di], al ; CHANGED
seg000:52A3 loop loc_5298
-> AGI256 INTERPRETER:
seg000:5298 loc_5298: ; CODE XREF: sub_526F+34�j
seg000:5298 inc di
seg000:5299 call near ptr 9A4Fh ; CHANGED
seg000:52A3 loop loc_5298
/////////////////////////////////////////////////////////////////////////////
In _SBuffYLine (Name from Agi2917.idb):
This converts the vertical drawing loop to use 320 rather than 160 as the
offset between rows. Also changes direct pixel manipulation code to a
function call with functionally identical code in it.
Rationale:
As there are now two AGI screens horizontally adjacent to each other (Left
160x168 one is the normal 16 color screen and the right 160x168 one is the
new 256 color screen) the vertical line drawing loop has to use 320 as the
offset between rows rather than 160. The pixel manipulation code replacement
with a function call is probably not needed as it doesn't functionally change
anything.
- ORIGINAL 2.936 INTERPRETER:
seg000:52E3 loc_52E3: ; CODE XREF: sub_52AB+34�j
seg000:52E3 add di, 0A0h ; 'á'
seg000:52E7 mov al, es:[di]
seg000:52EA or al, bh
seg000:52EC and al, bl
seg000:52EE mov es:[di], al
seg000:52F1 loop loc_52E1
-> AGI256 INTERPRETER:
seg000:52E3 loc_52E3: ; CODE XREF: sub_52AB+34�j
seg000:52E3 add di, 140h
seg000:52E7 call near ptr 9A4Fh
seg000:52F1 loop loc_52E1
which is effectively the same as:
seg000:52E3 loc_52E3: ; CODE XREF: sub_52AB+34�j
seg000:52E3 add di, 140h
seg000:024F mov al, es:[di]
seg000:0252 or al, bh
seg000:0254 and al, bl
seg000:0256 mov es:[di], al
seg000:52F1 loop loc_52E1
/////////////////////////////////////////////////////////////////////////////
In _SBuffPlotPixel (Name from Agi2917.idb):
Changes multiplication from 160 to 320 in calculation x + y * 320.
(16 to 32 really but they're multiplied by 10 before these changes).
Rationale:
As there are now two AGI screens horizontally adjacent to each other (Left
160x168 one is the normal 16 color screen and the right 160x168 one is the
new 256 color screen) the pixel plotting code has to use 320 as the offset
between rows rather than 160.
- ORIGINAL 2.936 INTERPRETER:
seg000:5311 shl di, 1
seg000:5313 shl di, 1
seg000:5315 shl di, 1
seg000:5317 shl di, 1
-> AGI256 INTERPRETER:
seg000:5311 shl di, 4
seg000:5314 shl di, 1
/////////////////////////////////////////////////////////////////////////////
In _SBuffPlotPixel (Name from Agi2917.idb):
Changes direct pixel manipulation code to a function call.
Functionally changes nothing as the called function is functionally
identical to the code that was replaced.
Rationale:
Maybe not needed at all? Maybe some leftover modification that wasn't used
after all?
- ORIGINAL 2.936 INTERPRETER:
seg000:532F mov al, es:[di]
seg000:5332 or al, bh
seg000:5334 and al, bl
seg000:5336 mov es:[di], al
-> AGI256 INTERPRETER:
seg000:532F call near ptr 9A4Fh
/////////////////////////////////////////////////////////////////////////////
In _SBuffPicFill (Name from Agi2917.idb):
Changes multiplication from 160 to 320 in calculation x + y * 320.
(16 to 32 really but they're multiplied by 10 before these changes).
Rationale:
As there are now two AGI screens horizontally adjacent to each other (Left
160x168 one is the normal 16 color screen and the right 160x168 one is the
new 256 color screen) the pixel plotting code has to use 320 as the offset
between rows rather than 160.
- ORIGINAL 2.936 INTERPRETER:
seg000:5483 shl di, 1
seg000:5485 shl di, 1
seg000:5487 shl di, 1
seg000:5489 shl di, 1
-> AGI256 INTERPRETER:
seg000:5483 shl di, 4
seg000:5486 shl di, 1
/////////////////////////////////////////////////////////////////////////////
In _Pic_Show (Name from Agi2917.idb):
Before calling j_EGAPutBlock (Name from Agi2917.idb) or j_AG_agi256PutBlock
(Name from AGI256's disassembly) rotate the AGI screen buffers' pixels right
by four in place (Writes the rotated values back to the buffer, that is)
if a certain variable is one (rotate_sbuff). Probably exchanges the places
of color and priority information.
Rationale:
As there are now two AGI screens horizontally adjacent to each other (Left
160x168 one is the normal 16 color screen and the right 160x168 one is the
new 256 color screen) priority screen showing code needs to use 320 as the
offset between rows rather than 160. But because the code is just a single
loop for rotating the whole screen and rotating the 256 color values (If
they aren't shown) doesn't matter (As presumably they are rotated back to
their normal values afterwards) it is easier to just rotate both screens.
160*168 = 0x6900
160*168*2 = 0xD200
- ORIGINAL 2.936 INTERPRETER:
seg000:5563 mov cx, 6900h
-> AGI256 INTERPRETER:
seg000:5563 mov cx, 0D200h
/////////////////////////////////////////////////////////////////////////////
In _FBuffOffset (Agi2917.idb), agiToScreenCoords (AGI256 disassembly):
Changes graphics driver dependent (CGA, EGA, Hercules etc) specific
switches to a single VGA specific code.
Rationale:
AGI256 requires VGA so there's no need for the other switches.
// The original 2.936 interpreter's part in pseudo C:
{
uint16 display = *(ds:0x1130); // enum {CGA, Tandy, HGC, EGA, VGA?};
uint16 computer = *(ds:0x112e); // enum { IBM_PC?, PCJr?, Tandy?, ...?}
if (display == VGA)
x *= 2;
if (computer == IBM_PC) {
x /= 2;
if (display == EGA)
x /= 2;
}
if (computer == Tandy) {
if (display == EGA)
x /= 4;
}
offset += x;
retn;
}
// AGI256 interpreter's part in pseudo C:
di += bx * 2;
retn;
- ORIGINAL 2.936 INTERPRETER:
seg000:5636 cmp word ptr ds:1130h, 4
seg000:563B jnz loc_563F
seg000:563D shl bx, 1
seg000:563F
seg000:563F loc_563F: ; CODE XREF: seg000:563B�j
seg000:563F cmp word ptr ds:112Eh, 0
seg000:5644 jnz loc_5651
seg000:5646 shr bx, 1
seg000:5648 cmp word ptr ds:1130h, 3
seg000:564D jnz loc_5651
seg000:564F shr bx, 1
seg000:5651
seg000:5651 loc_5651: ; CODE XREF: seg000:5644�j
seg000:5651 ; seg000:564D�j
seg000:5651 cmp word ptr ds:112Eh, 2
seg000:5656 jnz loc_5663
seg000:5658 cmp word ptr ds:1130h, 3
seg000:565D jnz loc_5663
seg000:565F shr bx, 1
seg000:5661 shr bx, 1
seg000:5663
seg000:5663 loc_5663: ; CODE XREF: seg000:5656�j
seg000:5663 ; seg000:565D�j
seg000:5663 add di, bx
seg000:5665 retn
-> AGI256 INTERPRETER:
seg000:5636 shl bx, 1
seg000:5638 add di, bx
seg000:563A retn
/////////////////////////////////////////////////////////////////////////////
In _PicBuffOffset (Agi2917.idb), screenOffset (AGI256 disassembly):
Changes multiplication from 160 to 320 in calculation x + y * 320.
(16 to 32 really but they're multiplied by 10 before these changes).
Rationale:
As there are now two AGI screens horizontally adjacent to each other (Left
160x168 one is the normal 16 color screen and the right 160x168 one is the
new 256 color screen) the AGI screen pixel position calculation has to use
320 as the offset between rows rather than 160.
- ORIGINAL 2.936 INTERPRETER:
seg000:5676 shl di, 1
seg000:5678 shl di, 1
seg000:567A shl di, 1
seg000:567C shl di, 1
-> AGI256 INTERPRETER:
seg000:5676 shl di, 4
seg000:5679 shl di, 1
seg000:567B nop
seg000:567C nop
seg000:567D nop
/////////////////////////////////////////////////////////////////////////////
Function that is called near the _EnablePicDraw's beginning in Agi2917.idb:
If the relocation value 0x9800 works here too (Why wouldn't it?) then
we're changing jump from ???GRAF.OVL's first subroutine (Not from the
jump table in its head but after that at 0x0015 is the first subroutine)
to a straight return. The first subroutine the the ???GRAF.OVL is the video
mode setting routine. At least in AGIGRAF.OVL it sets 320x200 256 color video
mode (Mode 13h), sets ds:[videoOfs] to 0xA000 and clears first 64 KiB of video
memory with zeroes.
Rationale:
So this basically throws away some video mode specific stuff and replaces
it with a VGA specific "nothing needed here" code :).
// The original 2.936 interpreter's part in pseudo C:
{
uint16 display = *(ds:0x1130); // enum {CGA, Tandy, HGC, EGA, VGA?};
uint16 computer = *(ds:0x112e); // enum { IBM_PC?, PCJr?, Tandy?, ...?}
if (computer == IBM_PC && display != HGC && display != EGA)
setVideoMode(); // goto near ptr 0x9815;
else
retn;
}
// AGI256 interpreter's part in pseudo C (Eh :)):
retn;
- ORIGINAL 2.936 INTERPRETER:
seg000:569F jmp near ptr 9815h
-> AGI256 INTERPRETER:
seg000:569F retn
/////////////////////////////////////////////////////////////////////////////
If the relocation value 0x9800 works here too (Why wouldn't it?) then
we're changing jump from ???GRAF.OVL's second subroutine (Not from the
jump table in its head but after that at 0x0037 is the second subroutine)
to a straight return. The second subroutine the the ???GRAF.OVL is the text
mode setting routine. At least in AGIGRAF.OVL it sets 40x25 16 color text mode,
enables background intensity (Colors 8-15), sets some cursor stuff and
clears the text screen using some attribute.
So this basically throws away some video mode specific stuff and replaces
it with a VGA specific "nothing needed here" code :).
// The original 2.936 interpreter's part in pseudo C:
{
uint16 display = *(ds:0x1130); // enum {CGA, Tandy, HGC, EGA, VGA?};
uint16 computer = *(ds:0x112e); // enum { IBM_PC?, PCJr?, Tandy?, ...?}
if (computer == IBM_PC && display != HGC && display != EGA)
setTextMode(); // goto near ptr 0x9837;
else
retn;
}
// AGI256 interpreter's part in pseudo C (Eh :)):
retn;
- ORIGINAL 2.936 INTERPRETER:
seg000:5937 jmp near ptr 9837h
-> AGI256 INTERPRETER:
seg000:5937 retn
/////////////////////////////////////////////////////////////////////////////
'GAMEID' -string's (No trailing zero btw) start is turned into 'DM', 0
Rationale:
DM is probably short for "Dark Minister" who was the hacker who made the
AGI256 hack. Is this modification needed? Is this checked as the game ID
or something? Don't know...
- ORIGINAL 2.936 INTERPRETER:
seg000:5B6C 'GAMEID' (A string without the trailing zero)
-> AGI256 INTERPRETER:
seg000:5B6C 'DM', 0 (, 'eID')
/////////////////////////////////////////////////////////////////////////////
In _MenuInput (Agi2917.idb):
Changes _WindowLineClr (Agi2917.idb) call near the function's beginning to
AGIGRAF.OVL's setWhiteMenuBar which clears first 8 rows (320*8 bytes) of
video memory with white pixels (Color 15).
Rationale:
Probably needed for VGA support when handling the menu/status line.
- ORIGINAL 2.936 INTERPRETER:
seg000:93ED call sub_2BA6
-> AGI256 INTERPRETER:
seg000:93ED call near ptr 9A5Ah
/////////////////////////////////////////////////////////////////////////////
- ORIGINAL 2.936 INTERPRETER & AGI256 INTERPRETER -info combined:
seg001:0000 dd 0 ;
seg001:0004 db 0 ;
seg001:0005 db 0 ;
seg001:0006 dd unk_9800
seg001:000A dw seg seg006
seg001:000C db 86h ; å
seg001:000D db 0 ;
seg001:000E db 0 ;
seg001:000F db 0 ;
seg001:0010 db 0 ;
seg001:0011 db 0 ;
seg001:0012 db 2Bh ; +
seg001:0013 db 0 ;
seg001:0014 db 0 ;
seg001:0015 db 0 ;
seg001:0016 dd unk_9800
seg001:001A dw seg seg004
seg001:001C db 93h ; ô
seg001:001D db 0 ;
seg001:001E db 0 ;
seg001:001F db 0 ;
seg001:0020 db 0 ;
seg001:0021 db 0 ;
seg001:0022 db 1Eh ;
seg001:0023 db 0 ;
seg001:0024 db 0 ;
seg001:0025 db 0 ;
seg001:0026 dd unk_9800
seg001:002A dw seg seg005
seg001:002C db 159
seg001:002D db 0 ;
seg001:002E db 0 ;
seg001:002F db 0 ;
seg001:0030 db 0 ;
seg001:0031 db 0 ;
seg001:0032 db 37 ; Changed 0x25 (37) -> 0x28 (40) in AGI256 hack, size in paragraphs
seg001:0033 db 0 ;
seg001:0034 db 0 ;
seg001:0035 db 0 ;
seg001:0036 dd unk_9800
seg001:003A dw seg seg007
seg001:003C db 172
seg001:003D db 0 ;
seg001:003E db 0 ;
seg001:003F db 0 ;
seg001:0040 db 0 ;
seg001:0041 db 0 ;
seg001:0042 db 91
seg001:0043 db 0 ;
seg001:0044 db 0 ;
seg001:0045 db 0 ;
seg001:0046 dd unk_9800
seg001:004A dw seg seg003
seg001:004C db 185
seg001:004D db 0 ;
seg001:004E db 0 ;
seg001:004F db 0 ;
seg001:0050 db 0 ;
seg001:0051 db 0 ;
seg001:0052 db 23 ; Changed 0x17 (23) -> 0x28 (40) in AGI256 hack, size in paragraphs
seg001:0053 db 0 ;
seg001:0054 db 0 ;
seg001:0055 db 0 ;
seg001:0056 dd unk_9DB0
seg001:005A dw seg seg008
seg001:005C db 197
seg001:005D db 0 ;
seg001:005E db 0 ;
seg001:005F db 0 ;
seg001:0060 db 0 ;
seg001:0061 db 0 ;
seg001:0062 db 22 ; Changed 0x16 (22) -> 0x19 (25) in AGI256 hack, size in paragraphs
seg001:0063 db 0 ;
seg001:0064 db 0 ;
seg001:0065 db 0 ;
seg001:0066 dd unk_9DB0
seg001:006A dw seg seg009
seg001:006C dw 210
seg001:006E db 0 ;
seg001:006F db 0 ;
seg001:0070 db 0 ;
seg001:0071 db 0 ;
seg001:0072 dw 38
seg001:0074 db 0 ;
seg001:0075 db 40h
seg001:0076 db 0 ;
seg001:0077 db 0 ;
seg001:0078 dd seg seg009+0BF10000h
seg001:007C dw 0DFh
seg001:007E db 0 ;
seg001:007F db 0 ;
seg001:0080 db 0 ;
seg001:0081 db 0 ;
seg001:0082 db 0E8h ; F
seg001:0083 db 1 ;
seg001:0084 db 0FFh ;
seg001:0085 db 0FFh ;
seg001:0086 aCga_graf_ovl db 'CGA_GRAF.OVL',0 ; Changed to an empty string in AGI256 hack
seg001:0093 aJr_graf_ovl db 'JR_GRAF.OVL',0 ; Changed to an empty string in AGI256 hack
seg001:009F aEga_graf_ovl db 'EGA_GRAF.OVL',0 ; Changed to 'AGIGRAF.OVL',0 in AGI256 hack
seg001:00AC aHgc_graf_ovl db 'HGC_GRAF.OVL',0 ; Changed to an empty string in AGI256 hack
seg001:00B9 aVg_graf_ovl db 'VG_GRAF.OVL',0 ; Changed to an empty string in AGI256 hack
seg001:00C5 aIbm_objs_ovl db 'IBM_OBJS.OVL',0 ; Changed to 'AGIOBJS.OVL',0 in AGI256 hack
seg001:00D2 aHgc_objs_ovl db 'HGC_OBJS.OVL',0 ; Changed to an empty string in AGI256 hack
seg001:00DF aAgidata_ovl db 'AGIDATA.OVL',0
seg001:00EB aAgi_exe db 'AGI.EXE',0
/////////////////////////////////////////////////////////////////////////////