Open main menu

Difference between revisions of "Compiling ScummVM/MinGW"

no edit summary
(27 intermediate revisions by 6 users not shown)
Line 1: Line 1:
== Compiling ScummVM with Minimalist GNU for Windows (MINGW) ==
== Compiling ScummVM with Minimalist GNU for Windows (MinGW) ==


MinGW is "a collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs".  
MinGW is "a collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs".  


More information can be found at the [http://www.mingw.org/ MinGW homepage]
More information can be found at the [https://osdn.net/projects/mingw/ MinGW homepage]. See also [[Compiling_ScummVM/MinGW-w64|MinGW-w64]].


== Things needed ==
== Things needed ==
Line 9: Line 9:
=== MinGW and MSYS ===
=== MinGW and MSYS ===


Download MinGW:  
* Download and install the latest [https://osdn.net/projects/mingw/releases/ MinGW Installation Manager] (mingw-get-setup.exe)
* From the list of packages shown, check ''mingw-developer-toolkit-bin'', ''mingw32-base-bin'' and ''mingw32-gcc-g++-bin'', as well as ''mingw32-libz-dev'' from the "MinGW Libraries" section (right-click > Mark for Installation)
* Click the Installation > Apply Changes menu to install MinGW and MSYS
* Once installation is complete, you can run MSYS from inside the MinGW directory (by default C:\MinGW\msys\1.0\msys.bat)


*[http://sourceforge.net/projects/mingw/files/MinGW/Base/binutils/binutils-2.21/binutils-2.21-3-mingw32-bin.tar.lzma/ binutils]
=== Libraries needed ===
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/gcc-core-4.6.2-1-mingw32-bin.tar.lzma/download gcc-core dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libgcc-4.6.2-1-mingw32-dll-1.tar.lzma/download gcc-core dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/gcc-c%2B%2B-4.6.2-1-mingw32-bin.tar.lzma/download gcc-g++ dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libstdc%2B%2B-4.6.2-1-mingw32-dll-6.tar.lzma/download gcc-g++ dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gmp/gmp-5.0.1-1/gmp-5.0.1-1-mingw32-dev.tar.lzma/download gmp dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libgomp-4.6.2-1-mingw32-dll-1.tar.lzma/download gmp dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libgomp-4.6.2-1-mingw32-dll-1.tar.lzma/download gomp]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gettext/gettext-0.17-1/libintl-0.17-1-mingw32-dll-8.tar.lzma/download iconv]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/libiconv/libiconv-1.13.1-1/libiconv-1.13.1-1-mingw32-dev.tar.lzma/download intl dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/libiconv/libiconv-1.13.1-1/libiconv-1.13.1-1-mingw32-dll-2.tar.lzma/download intl dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gmp/gmp-5.0.1-1/libgmp-5.0.1-1-mingw32-dll-10.tar.lzma/download libgmp]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mingw-rt/mingwrt-3.18/mingwrt-3.18-mingw32-dev.tar.gz/download mingw-runtime dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mingw-rt/mingwrt-3.18/mingwrt-3.18-mingw32-dll.tar.gz/download mingw-runtime  dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mpc/mpc-0.8.1-1/mpc-0.8.1-1-mingw32-dev.tar.lzma/download mpc dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mpc/mpc-0.8.1-1/libmpc-0.8.1-1-mingw32-dll-2.tar.lzma/download mpc dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mpfr/mpfr-2.4.1-1/mpfr-2.4.1-1-mingw32-dev.tar.lzma/download mpfr dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/mpfr/mpfr-2.4.1-1/libmpfr-2.4.1-1-mingw32-dll-1.tar.lzma/download mpfr dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/pthreads-w32/pthreads-w32-2.8.0-3/pthreads-w32-2.8.0-3-mingw32-dev.tar.lzma/download pthreads dev]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/pthreads-w32/pthreads-w32-2.8.0-3/libpthread-2.8.0-3-mingw32-dll-2.tar.lzma/download pthreads dll]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/gcc/Version4/gcc-4.6.2-1/libssp-4.6.2-1-mingw32-dll-0.tar.lzma/download ssp]
*[http://sourceforge.net/projects/mingw/files/MinGW/Base/w32api/w32api-3.17/w32api-3.17-2-mingw32-dev.tar.lzma/download w32api]


Download MSYS and the MSYS Developer Tools:
* [https://www.libsdl.org/download-2.0.php SDL2].
** You need the latest SDL2 development libraries: ([https://www.libsdl.org/release/SDL2-devel-2.0.14-mingw.tar.gz v2.0.14] at the time of writing).


*[http://sourceforge.net/projects/mingw/files/MSYS/Base/msys-core/msys-1.0.11/MSYS-1.0.11.exe/download MSYS 1.0.11]
* [https://github.com/libsdl-org/SDL-1.2 SDL 1.2]. For Windows 95/98/ME support
*[http://sourceforge.net/projects/mingw/files/Other/Unsupported/MSYS/msysDTK/msysDTK-1.0.1/msysDTK-1.0.1.exe/download msysDTK]
** You need the latest SDL 1.2 source code revision from GitHub ([https://github.com/libsdl-org/SDL-1.2/tree/27d991f356a2712feba0d7749f11807849665491 27d991f356a2712feba0d7749f11807849665491] at the time of writing).


Check the "'''Installing MinGW and MSYS'''" section below for instructions on how to create your ScummVM compilation environment
* [https://www.libsdl.org/projects/SDL_net/ SDL2_net]. Optional, for network support.
** You need the latest SDL2_net source code ([https://www.libsdl.org/projects/SDL_net/release/SDL2_net-2.0.1.tar.gz v2.0.1] at the time of writing).


=== Libraries needed ===
* [https://www.libsdl.org/projects/SDL_net/release-1.2.html SDL_net 1.2]. Optional, for network support on Windows 95/98/ME.
** You need the latest SDL_net source code ([https://www.libsdl.org/projects/SDL_net/release/SDL_net-1.2.8.tar.gz v1.2.8] at the time of writing).
 
* [https://sourceforge.net/projects/pkgconfiglite/ pkg-config-lite].
** You need the latest Win32 binary ([https://sourceforge.net/projects/pkgconfiglite/files/0.28-1/pkg-config-lite-0.28-1_bin-win32.zip/download v0.28-1] at the time of writing).


* [http://www.libsdl.org/download-1.2.php SDL 1.2].  
* [http://www.nasm.us/pub/nasm/releasebuilds/?C=M;O=D NASM]. Optional, for faster compile of scalers
** You need the latest Development Libraries file for Mingw32.  
** You need the latest Win32 binary ([http://www.nasm.us/pub/nasm/releasebuilds/2.15.05/win32/ v2.15.05] at the time of writing).


* [http://www.nasm.us/pub/nasm/releasebuilds/?C=M;O=D NASM] Optional, for faster compile of scalers
* [https://cmake.org/ CMake]. Optional, for compiling libjpeg-turbo.
** You need the latest Win32 binary ([http://www.nasm.us/pub/nasm/releasebuilds/2.10.07/win32/ 2.10.07] at the time of writing).
** You need the latest Win32 installer.


* [http://flac.sourceforge.net/download.html FLAC]. Optional, for FLAC support
* [https://xiph.org/flac/download.html FLAC]. Optional, for FLAC support
** You need the latest flac source code.
** You need the latest flac source code ([http://downloads.xiph.org/releases/flac/flac-1.3.3.tar.xz v1.3.3] at the time of writing).


* [http://downloads.xiph.org/releases/ogg/ libogg] and [http://downloads.xiph.org/releases/vorbis/ libvorbis] Optional, for OGG support
* [http://downloads.xiph.org/releases/ogg/ libogg] and [http://downloads.xiph.org/releases/vorbis/ libvorbis] Optional, for OGG support
** You need the latest libogg and libvorbis (not vorbis) source code.
** You need the latest libogg source code ([https://downloads.xiph.org/releases/ogg/libogg-1.3.4.tar.xz v1.3.4] at the time of writing).
** You need the latest libvorbis (not vorbis) source code ([https://downloads.xiph.org/releases/vorbis/libvorbis-1.3.7.tar.xz v1.3.7] at the time of writing).


* [ftp://ftp.mars.org/pub/mpeg/ libmad] Optional, for MP3 support
* [ftp://ftp.mars.org/pub/mpeg/ libmad] Optional, for MP3 support
** You need the latest libmad source code.
** You need the latest libmad source code ([ftp://ftp.mars.org/pub/mpeg/libmad-0.15.1b.tar.gz v0.15.1b] at the time of writing).


* [http://libmpeg2.sourceforge.net/ libmpeg2] Optional, for MPEG2 cutscene support.
* [http://libmpeg2.sourceforge.net/ libmpeg2] Optional, for MPEG2 cutscene support.
** You need the latest libmpeg2 source code, currently v0.5.1.
** You need the latest libmpeg2 source code, ([http://libmpeg2.sourceforge.net/files/libmpeg2-0.5.1.tar.gz v0.5.1] at the time of writing).
 
* [http://www.zlib.net/ zlib]. Optional, for compressed saved games.
** You need the latest zlib source code.


* [http://downloads.xiph.org/releases/theora/ libtheora]. Optional, for Broken Sword 2.5.
* [http://downloads.xiph.org/releases/theora/ libtheora]. Optional, for Broken Sword 2.5.
** You need the latest libtheora source code.
** You need the latest libtheora source code ([https://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2 v1.1.1] at the time of writing).


* [http://www.audiocoding.com/downloads.html libfaad2]. Optional, for AAC support.
* [https://github.com/knik0/faad2 libfaad2]. Optional, for AAC support.
** You need the latest libfaad2 source code.
** You need the latest libfaad2 source code ([https://github.com/knik0/faad2/releases/tag/2_10_0 v2.10.0] at the time of writing).


* [http://www.libpng.org/pub/png/libpng.html libpng]. Optional, for PNG support.
* [http://www.libpng.org/pub/png/libpng.html libpng]. Optional, for PNG support.
** You need the latest libpng source code.
** You need the latest libpng source code ([https://download.sourceforge.net/libpng/libpng-1.6.37.tar.xz v1.6.37] at the time of writing).
 
* [http://giflib.sourceforge.net/ giflib]. Optional, for GIF support.
** You need at least [https://downloads.sourceforge.net/giflib/giflib-5.1.4.tar.gz v5.1.4].


* [http://download.savannah.gnu.org/releases/freetype/ freetype]. Optional, for TTF support.
* [http://download.savannah.gnu.org/releases/freetype/ freetype]. Optional, for TTF support.
** You need the latest freetype source code.
** You need the latest freetype source code ([http://download.savannah.gnu.org/releases/freetype/freetype-2.10.4.tar.xz v2.10.4] at the time of writing).
 
* [http://sourceforge.net/apps/trac/fluidsynth fluidsynth]. Optional, for soundfont MIDI support.
** You need at least v1.0.9. Newer versions than this should work, but require GTK's glib and CMAKE to build.


=== Precompiled libraries ===
* [http://www.fluidsynth.org/ fluidsynth]. Optional, for soundfont MIDI support.
To ease the whole process, a package of all the needed precompiled libraries has been created.
** You need at least [https://sourceforge.net/projects/fluidsynth/files/older%20releases/fluidsynth-1.0.9.tar.gz/download v1.0.9]. Newer versions than this should work, but require GTK's glib and CMAKE to build.
All you need to do is:
* Download the precompiled libraries and the [http://www.libsdl.org/release/SDL-1.2.15-win32.zip latest SDL runtime library] - latest version is 1.2.15 at the time this was written, you can find the latest version [http://www.libsdl.org/download-1.2.php here]. Precompiled libraries:
** [http://www.scummvm.org/frs/build/scummvm-required-libs-mingw.zip Precompiled libraries]


== Installing MinGW and MSYS ==
* [https://github.com/fribidi/fribidi FriBiDi]. Optional, for bidirectional text in languages that need it (e.g. Hebrew)
** You need the latest FriBiDi source code ([https://github.com/fribidi/fribidi/releases/tag/v1.0.10 v1.0.10] at the time of writing).


Both MinGW and MSYS need to be installed and working to compile ScummVM.  
* [https://libjpeg-turbo.org/ libjpeg-turbo]. Optional, for JPEG support.
** You need the latest libjpeg-turbo source code ([https://sourceforge.net/projects/libjpeg-turbo/files/2.0.6/libjpeg-turbo-2.0.6.tar.gz/download v2.0.6] at the time of writing).


* Create a directory called mingw in the root directory of drive (ie C:\MinGW\ )
* [http://liba52.sourceforge.net/ liba52]. Optional, for AC-3 support.
* Extract all the mingw packages to the mingw directory
** You need the latest liba52 source code ([http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz v0.7.4] at the time of writing).
* Then, install MSYS. After installation, a new console window will appear, asking if you wish to proceed with the post install. Answer 'y' to that prompt. You will then be asked if you have MinGW installed. Answer 'y' to that and then type in the path of your MinGW directory using forward slashes (e.g. C:/MinGW). Make sure that there is no "make" utility in the MinGW bin folder, as this will clash with the make utility in MSYS. With the recent packages described in the section above, you shouldn't have that problem.
* After both MinGW and MSYS are installed correctly, install MSYS DTK


* [https://tls.mbed.org/ mbedTLS]. Optional, for cloud support.
** You need the latest mbedTLS source code ([https://github.com/ARMmbed/mbedtls/archive/v2.26.0.tar.gz v2.26.0] at the time of writing).


=== Additional information about MinGW and Windows Vista ===
* [https://curl.se/ libcurl]. Optional, for cloud support.
** You need the latest libcurl source code ([https://curl.se/download/curl-7.76.0.tar.xz v7.76.0] at the time of writing).


In order to get MinGW properly working under Windows Vista, you need to do the following:
* [https://github.com/nigels-com/glew GLEW]. Optional, for hardware acceleration in 3D games.
Go to Control Panel->System, and click on "Advanced System Settings" to the left. Then click on "Environment variables" and on the bottom window ("System variables"), select the "Path" variable and edit it. This variable tells windows where to look for binaries when it can't find them in the current folder. You'll find a lot of directories there separated by semicolons.  
** You need the latest GLEW source code ([https://github.com/nigels-com/glew/tree/glew-2.2.0 v2.2.0] at the time of writing).


Make sure that the MinGW bin directory is included in the path (e.g. C:\MinGW\bin), which should already be included there from the MinGW installer. Also, make sure that the libexec path is included too (e.g. C:\MinGW\libexec\gcc\mingw32\3.4.2), which is needed in Vista to get MinGW properly working
==== Precompiled libraries ====
To ease the whole process, a package of all the needed precompiled libraries has been created.
All you need to do is:
* Download the precompiled libraries and the [http://www.libsdl.org/release/SDL-1.2.15-win32.zip latest SDL runtime library] - latest version is 1.2.15 at the time this was written, you can find the latest version [http://www.libsdl.org/download-1.2.php here]. Precompiled libraries:
** [http://downloads.scummvm.org/frs/build/scummvm-required-libs-mingw.zip Precompiled libraries]
* Extract them to your MinGW directory (e.g. C:\MinGW)


== MSYS primer ==
== MSYS primer ==


From the developer's webpage: "MSYS or Minimal SYStem is a POSIX and Bourne shell environment use with MinGW. It provides a hand picked set of tools to allow a typical configuration script with Bourne syntax to execute. This allows most of the GNU packages to create a Makefile just from executing the typical configure script which can then be used to build the package using the native MinGW version of GCC".
From the developer's webpage: "MSYS or Minimal SYStem is a POSIX and Bourne shell environment use with MinGW. It provides a hand picked set of tools to allow a typical configuration script with Bourne syntax to execute. This allows most of the GNU packages to create a Makefile just from executing the typical configure script which can then be used to build the package using the native MinGW version of GCC".
For more information, check the [http://www.mingw.org/mingwfaq.shtml#faq-msys MinGW FAQ page]




Line 143: Line 131:
=== NASM ===
=== NASM ===


First of all, we need nasm. So unzip the nasm archive in a directory, and copy both files to MinGW's bin directory. Alternatively, you can include the folder you unzipped the files in your system path. To do this, go to Control Panel->System, Advanced tab->environment variables and edit the "PATH" variable in the system variables list, adding the folder where you placed the aforementioned files. Directories in the system path are split with a semicolon (;), e.g. "C:\MinGW\msys\1.0\bin;C:\MinGW\bin;C:\nasm".
Unzip the nasm archive in a folder, and copy both files to MinGW's bin directory.
 


Note that changes to the PATH will be reflected on newly opened command prompts only, so if you got any open already, close them to avoid confusion
=== pkg-config-lite ===


=== SDL ===
Unzip the pkg-config-lite archive in a folder, and copy the "bin" and "share" to MinGW's root directory.


SDL is already compiled and needs no further changes, so we can skip the compilation step for it


After extracting the contents of the SDL archive in a folder, copy all the files in the 'include/SDL' folder to MinGW's include folder, copy all the files in the 'lib' folder to MinGW's lib folder and copy all the files in the 'bin' folder to MinGW's bin folder.
=== SDL1 ===


If you do wish to recompile SDL from source code, please note the following:
Unzip the SDL archive in a folder, open MSYS, go to the SDL folder and issue these commands to compile and install the library:
* Check that the libSDL source file src/main/win32/version.rc contains the correct version. This was incorrectly listed as v1.2.14 for the v1.2.15 release, needed an additional patch.
* Note the README [http://www.libsdl.org/extras/win32/mingw32/README.txt here], especially the need to include the DirectX development header and libraries from [http://www.libsdl.org/extras/win32/common/directx-devel.tar.gz here] to ensure that the "dsound" rather than the "waveout" / "winmm" fallback audio driver is used.


=== zlib ===
./configure --disable-shared --prefix=/mingw
make
make install


Unzip the source code in a folder, open MSYS, go to the zlib folder and issue this command to compile the library:
Note the README [http://www.libsdl.org/extras/win32/mingw32/README.txt here], especially the need to include the DirectX development headers from [http://www.libsdl.org/extras/win32/common/directx-devel.tar.gz here] to ensure that the "dsound" rather than the "waveout" / "winmm" fallback audio driver is used.


make -f win32/makefile.gcc


After compilation, copy '''zlib.h''' and '''zconf.h''' inside MinGW's include folder and libz.a inside MinGW's lib folder
=== SDL2 ===


Note that a prebuilt version of SDL2 is required since MinGW32 doesn't have all the necessary Windows SDK headers.


You can do this using Explorer or by typing these commands in MSYS inside the zlib folder:
Unzip the SDL2 archive in a folder, open MSYS, go to the SDL2 folder and issue this command to install the library:


  cp -p libz.a /mingw/lib
  make install-package arch=i686-w64-mingw32 prefix=$PREFIX
cp -p zlib.h zconf.h /mingw/include




=== libogg ===
=== libogg ===


libogg should be compiled before libvorbis and libFLAC
libogg should be compiled before libvorbis, libtheora and libFLAC.
Unzip the libogg archive in a folder, open MSYS, go to the libogg folder and issue these commands to compile the library:
 
Unzip the libogg archive in a folder, open MSYS, go to the libogg folder and issue these commands to compile and install the library:


  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
 
  make install
To install the library, type:
  make install prefix=/mingw




=== libvorbis ===
=== libvorbis ===


Unzip the libvorbis archive in a folder, open MSYS, go to the libvorbis folder and issue these commands to compile the library:
Unzip the libvorbis archive in a folder, open MSYS, go to the libvorbis folder and issue these commands to compile and install the library:


  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
 
  make install
To install the library, type:
  make install prefix=/mingw




=== libmad ===
=== libmad ===


Unzip the libmad archive in a folder. Open MSYS, go to the libmad folder. If you are using gcc 4.4 or higher, run the following command:
Unzip the libmad archive in a folder, open MSYS and go to the libmad folder and issue these commands to compile and install the library:
  sed -i '/-fforce-mem/d' configure
  sed -i '/-fforce-mem/d' configure
Then issue these commands to compile the library:
  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
 
  make install
To install the library, type:
  make install prefix=/mingw




=== libmpeg2 ===
=== libmpeg2 ===


Unzip the libmpeg2 archive into a folder. Open MSYS, go to the libmpeg2 folder.
Unzip the libmpeg2 archive into a folder, open MSYS, go to the libmpeg2 folder and issue these commands to compile and install the library:
 
sed -i -e '/AC_C_ALWAYS_INLINE/d' -e 's/-mcpu/-mtune/' configure.ac
Then issue these commands to compile the library:
./bootstrap
  ./configure --disable-sdl --disable-shared --prefix=/mingw
  ./configure --disable-sdl --disable-shared --prefix=/mingw
  make
  make
make install


To install the library, type:
make install prefix=/mingw
Note that if you are compiling x64 i.e. for a 64-bit target, then currently (v0.5.1), the following patch is needed:
<source lang="diff">
--- libvo/video_out_dx.c.orig  2014-02-17 16:38:24.000000000 +0100
+++ libvo/video_out_dx.c        2014-02-17 16:39:34.000000000 +0100
@@ -92,7 +92,7 @@
    switch (message) {
    case WM_WINDOWPOSCHANGED:
-      instance = (dx_instance_t *) GetWindowLong (hwnd, GWL_USERDATA);
+      instance = (dx_instance_t *) GetWindowLongPtr (hwnd, GWLP_USERDATA);
        /* update the window position and size */
        point_window.x = 0;
@@ -173,7 +173,7 @@
    /* store a directx_instance pointer into the window local storage
      * (for later use in event_handler).
      * We need to use SetWindowLongPtr when it is available in mingw */
-    SetWindowLong (instance->window, GWL_USERDATA, (LONG) instance);
+    SetWindowLongPtr (instance->window, GWLP_USERDATA, (LONG_PTR) instance);
    ShowWindow (instance->window, SW_SHOW);
</source>


=== FLAC ===
=== FLAC ===


Unzip the flac archive in a folder, open MSYS, go to the flac folder and issue these commands to compile the library:
Unzip the flac archive in a folder, open MSYS, go to the flac folder and issue these commands to compile and install the library:


  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
 
  make install
To install the library, type:
  make install prefix=/mingw




Line 259: Line 213:
Unzip the fluidsynth archive in a folder, open MSYS, go to the fluidsynth folder and apply the following patch:
Unzip the fluidsynth archive in a folder, open MSYS, go to the fluidsynth folder and apply the following patch:


<source lang="diff">
<syntaxhighlight lang="diff">
--- include/fluidsynth.h
--- include/fluidsynth.h
+++ include/fluidsynth.h
+++ include/fluidsynth.h
Line 277: Line 231:
  #elif defined(MACOS9)
  #elif defined(MACOS9)
  #define FLUIDSYNTH_API __declspec(export)
  #define FLUIDSYNTH_API __declspec(export)
</source>
--- fluidsynth.pc.in
+++ fluidsynth.pc.in
@@ -7,4 +7,5 @@
Description: Software SoundFont synth
Version: @VERSION@
Libs: -L${libdir} -lfluidsynth
+Libs.private: @LIBFLUID_LIBS@
Cflags: -I${includedir}
</syntaxhighlight>


Then issue these commands to compile the library:
Then issue these commands to compile and install the library:
  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
make install


To install the library, type:
make install prefix=/mingw


=== libpng ===
=== libpng ===


Unzip the libpng archive in a folder, open MSYS, go to the libpng folder and issue these commands to compile the library:
Unzip the libpng archive in a folder, open MSYS, go to the libpng folder and issue these commands to compile and install the library:


  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
make pnglibconf.h
sed -i 's/\x0D//' pnglibconf.h
  make
  make
make install
=== giflib ===


To install the library, type:
Unzip the giflib archive in a folder, open MSYS, go to the giflib folder and issue these commands to compile and install the library:
  make install prefix=/mingw
 
  ./configure --disable-shared --prefix=/mingw
make
make install




=== libtheora ===
=== libtheora ===


Unzip the libtheora archive in a folder, open MSYS, go to the libtheora folder and issue these commands to compile the library:
Unzip the libtheora archive in a folder, open MSYS, go to the libtheora folder and issue these commands to compile and install the library:


  ./configure --disable-shared --disable-examples --prefix=/mingw
  ./configure --disable-shared --disable-examples --prefix=/mingw
  make
  make
make install
=== libfaad2 ===
Unzip the libfaad2 archive in a folder, open MSYS, go to the libfaad2 folder and issue these commands to compile and install the library:
./bootstrap
./configure --disable-shared --prefix=/mingw
make
make install
=== freetype ===
Unzip the freetype archive in a folder, open MSYS, go to the freetype folder and issue these commands to compile and install the library:
./configure --disable-shared --prefix=/mingw
make
make install
=== fribidi ===
Unzip the fribidi archive in a folder, open MSYS, go to the fribidi folder and apply the following patch:
<syntaxhighlight lang="diff">
--- fribidi.pc.in.orig  2020-07-05 20:17:23 +0100
+++ fribidi.pc.in      2020-08-30 17:17:43 +0100
@@ -9,5 +9,4 @@
Description: Unicode Bidirectional Algorithm Library
Version: @VERSION@
Libs: -L${libdir} -lfribidi
-Cflags: -I${includedir}/@PACKAGE@
-CFLAGS.private: -DFRIBIDI_LIB_STATIC
+Cflags: -I${includedir}/@PACKAGE@ -DFRIBIDI_LIB_STATIC
</syntaxhighlight>
Then issue these commands to compile and install the library:
./configure --disable-shared --prefix=/mingw
make
make install
=== libjpeg-turbo ===


To install the library, type:
Unzip the libjpeg-turbo archive in a folder, open MSYS, go to the libjpeg-turbo folder and issue these commands to compile and install the library:
make install prefix=/mingw


cmake -G "MSYS Makefiles" -DENABLE_SHARED=OFF -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release .
make
make install


=== libfaad2 ===


Unzip the libfaad2 archive in a folder, open MSYS, go to the libfaad2 folder and apply the following patch:
=== liba52 ===
 
Unzip the liba52 archive into a folder, open MSYS, go to the liba52 folder and issue these commands to compile and install the library:
 
rm -f autotools/{config.guess,config.sub,install-sh,ltmain.sh,missing,mkinstalldirs} {autotools,doc,include,liba52,libao,src,test,vc++,.}/Makefile.in include/config.h.in include/stamp-h.in aclocal.m4 configure
sed -i -e '/AC_C_ALWAYS_INLINE/d' -e 's/-mcpu/-mtune/' configure.in
autoreconf -fi
./configure --disable-shared --prefix=/mingw
make
make install
 
 
=== SDL_net ===
 
Unzip the SDL_net archive in a folder, open MSYS, go to the SDL_net folder and apply the following patch:
 
<syntaxhighlight lang="diff">
--- SDL_net.pc.in.orig  2012-01-15 16:20:10 +0000
+++ SDL_net.pc.in      2020-08-30 17:42:19 +0100
@@ -7,5 +7,5 @@
Description: net library for Simple DirectMedia Layer
Version: @VERSION@
Requires: sdl >= @SDL_VERSION@
-Libs: -L${libdir} -lSDL_net
+Libs: -L${libdir} -lSDL_net @INETLIB@
Cflags: -I${includedir}/SDL
</syntaxhighlight>


<source lang="diff">
Then issue these commands to compile and install the library:
--- frontend/main.c
+++ frontend/main.c
@@ -31,7 +31,9 @@
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
+#ifndef __MINGW32__
#define off_t __int64
+#endif
#else
#include <time.h>
#endif
</source>


Then issue these commands to compile the library:
  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
make install


To install the library, type:
make install prefix=/mingw


=== SDL2_net ===


=== freetype ===
Unzip the SDL2_net archive in a folder, open MSYS, go to the SDL2_net folder and apply the following patch:
 
<syntaxhighlight lang="diff">
--- SDL2_net.pc.in.orig 2016-01-03 07:57:09 +0000
+++ SDL2_net.pc.in      2020-08-30 17:45:28 +0100
@@ -7,5 +7,5 @@
Description: net library for Simple DirectMedia Layer
Version: @VERSION@
Requires: sdl2 >= @SDL_VERSION@
-Libs: -L${libdir} -lSDL2_net
+Libs: -L${libdir} -lSDL2_net @INETLIB@
Cflags: -I${includedir}/SDL2
EOF
</syntaxhighlight>


Unzip the freetype archive in a folder, open MSYS, go to the freetype folder and issue these commands to compile the library:
Then issue these commands to compile and install the library:


  ./configure --disable-shared --prefix=/mingw
  ./configure --disable-shared --prefix=/mingw
  make
  make
make install
=== mbedTLS ===
Unzip the mbedTLS archive in a folder, open MSYS, go to the mbedtls folder and apply the following patch:
<syntaxhighlight lang="diff">
--- library/platform_util.c.orig        2020-12-10 12:55:25 +0000
+++ library/platform_util.c    2021-03-08 23:59:37 +0000
@@ -92,9 +92,11 @@
  * threading.h. However, this macro is not part of the Mbed TLS public API, so
  * we keep it private by only defining it in this file
  */
-#if ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) )
+#if ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) || \
+      ( defined(__MINGW32__) && !defined(__MINGW64_VERSION_MAJOR) )
#define PLATFORM_UTIL_USE_GMTIME
-#endif /* ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) */
+#endif /* ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) || \
+            (defined(__MINGW32__) && !defined(__MINGW64_VERSION_MAJOR) ) */
#endif /* !( ( defined(_POSIX_VERSION) && _POSIX_VERSION >= 200809L ) ||    \
              ( defined(_POSIX_THREAD_SAFE_FUNCTIONS ) &&                    \
@@ -103,7 +105,7 @@
struct tm *mbedtls_platform_gmtime_r( const mbedtls_time_t *tt,
                                      struct tm *tm_buf )
{
-#if defined(_WIN32) && !defined(EFIX64) && !defined(EFI32)
+#if defined(_WIN32) && !defined(PLATFORM_UTIL_USE_GMTIME)
    return( ( gmtime_s( tm_buf, tt ) == 0 ) ? tm_buf : NULL );
#elif !defined(PLATFORM_UTIL_USE_GMTIME)
    return( gmtime_r( tt, tm_buf ) );
</syntaxhighlight>
Then issue these commands to compile and install the library:
CPPFLAGS=-D_WIN32_WINNT=0x400 cmake -G "MSYS Makefiles" -DCMAKE_INSTALL_PREFIX=$PREFIX -DCMAKE_BUILD_TYPE=Release -DENABLE_PROGRAMS=OFF -DENABLE_TESTING=OFF .
make
make install
=== libcurl ===
Unzip the curl archive in a folder, open MSYS, go to the curl folder and issue these commands to compile and install the library:
CPPFLAGS=-D_WIN32_WINNT=0x400 ./configure --disable-shared --prefix=/mingw --with-winssl --with-mbedtls --disable-pthreads --disable-ldap
make
make install
=== GLEW ===
Unzip the GLEW archive in a folder, open MSYS, go to the GLEW folder and apply the following patch:
<syntaxhighlight lang="diff">
--- config/Makefile.mingw.orig  2017-07-31 12:25:39 +0100
+++ config/Makefile.mingw      2020-12-10 20:23:36 +0000
@@ -5,8 +5,7 @@
LN :=
LDFLAGS.GL = -lopengl32 -lgdi32 -luser32 -lkernel32
LDFLAGS.EXTRA = -L/mingw/lib
-CFLAGS.EXTRA  += -fno-builtin -fno-stack-protector
-LDFLAGS.EXTRA += -nostdlib
+CFLAGS.EXTRA  += -fno-builtin -fno-stack-protector -Wno-cast-function-type
WARN = -Wall -W
POPT = -O2
BIN.SUFFIX = .exe
@@ -14,4 +13,4 @@
LIB.DEVLNK    = lib$(NAME).dll.a  # for mingw this is the dll import lib
LIB.SHARED    = $(NAME).dll
LIB.STATIC    = lib$(NAME).a      # the static lib will be broken
-LDFLAGS.SO    = -shared -Wl,-soname,$(LIB.SONAME) -Wl,--out-implib,lib/$(LIB.DEVLNK)
+LDFLAGS.SO    = -nostdlib -shared -Wl,-soname,$(LIB.SONAME) -Wl,--out-implib,lib/$(LIB.DEVLNK)
</syntaxhighlight>
Then issue these commands to compile and install the library:
make install.all GLEW_PREFIX=$PREFIX GLEW_DEST=$PREFIX GLEW_NO_GLU=-DGLEW_NO_GLU


To install the library, type:
make install prefix=/mingw


== Compiling ScummVM ==
== Compiling ScummVM ==
Line 354: Line 473:


  strip scummvm.exe
  strip scummvm.exe
== Compiling with Console/Text Output ==
By default ScummVM is compiled as a Windows subsystem application with no console output. If you need the console, you will need to apply the following patch:
<syntaxhighlight lang="diff">
diff --git a/configure b/configure
index 838c759b75..04cfd361dd 100755
--- a/configure
+++ b/configure
@@ -6070,6 +6070,9 @@ case $_host_os in
append_var CXXFLAGS "-fdata-sections"
append_var LDFLAGS "-Wl,--gc-sections"
;;
+ mingw*)
+ LIBS=`echo $LIBS | sed -e 's/-mconsole//g' -e 's/-mwindows//g'`
+ ;;
n64)
# Move some libs down here, otherwise some symbols requires by libvorbis aren't found
# during linking stage
</syntaxhighlight>
Save it to your root directory and apply it with <code>patch -p1 -i path-to-patch.diff</code>.


== Ready to go! ==
== Ready to go! ==


OK this should be all of it (thankfully), so you should be good to go.
OK this should be all of it (thankfully), so you should be good to go.
271

edits