Difference between revisions of "Compiling ScummVM/MinGW"

From ScummVM :: Wiki
Jump to navigation Jump to search
(Added FLAC to the downloadable libraries (v1.1.1 recommended), added some instructions about libmad)
 
(85 intermediate revisions by 15 users not shown)
Line 1: Line 1:
== Compiling ScummVM with Minimalist GNU for Windows (MINGW) ==
{| border="0" cellpadding="1" cellspacing="2" style="margin-left:5em; background:#FF9999; width:80%"
|- align="center"
|'''NOTE'''
|- style="margin-left:1em; background:#ffffff;"
|- style="background:#ffffff"
|Compiling with MinGW is more complicated to set up. It is recommended that you use [[Compiling_ScummVM/MinGW-w64|MinGW-w64]] or [[Compiling ScummVM/Docker|Docker]] instead, which are far easier to set up and get working.
|}
 
== Compiling ScummVM with Minimalist GNU for Windows (MinGW) ==


MinGW is "a collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs".  
MinGW is "a collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs".  


More information can be found at the [http://www.mingw.org/ MinGW homepage]
More information can be found at the [https://osdn.net/projects/mingw/ MinGW homepage]. See also [[Compiling_ScummVM/MinGW-w64|MinGW-w64]].
 


== Things needed ==
== Things needed ==
Line 10: Line 17:
=== MinGW and MSYS ===
=== MinGW and MSYS ===


To download MinGW, visit its [http://www.mingw.org/download.shtml download page]
* Download and install the latest [https://osdn.net/projects/mingw/releases/ MinGW Installation Manager] (mingw-get-setup.exe)
* From the list of packages shown, check ''mingw-developer-toolkit-bin'', ''mingw32-base-bin'' and ''mingw32-gcc-g++-bin'', as well as ''mingw32-libz-dev'' from the "MinGW Libraries" section (right-click > Mark for Installation)
* Click the Installation > Apply Changes menu to install MinGW and MSYS
* Once installation is complete, you can run MSYS from inside the MinGW directory (by default C:\MinGW\msys\1.0\msys.bat)
 
=== Libraries needed ===
 
* [https://www.libsdl.org/download-2.0.php SDL2].
** You need the latest SDL2 development libraries: ([https://www.libsdl.org/release/SDL2-devel-2.0.18-mingw.tar.gz v2.0.18] at the time of writing).
 
* [https://github.com/libsdl-org/SDL-1.2 SDL 1.2]. For Windows 95/98/ME support
** You need the latest SDL 1.2 source code revision from GitHub ([https://github.com/libsdl-org/SDL-1.2/tree/d3fc4db464827a7aa0e5a7c4bcb921709c343c9f d3fc4db464827a7aa0e5a7c4bcb921709c343c9f] at the time of writing).
 
* [https://www.libsdl.org/projects/SDL_net/ SDL2_net]. Optional, for network support.
** You need the latest SDL2_net source code ([https://www.libsdl.org/projects/SDL_net/release/SDL2_net-2.0.1.tar.gz v2.0.1] at the time of writing).
 
* [https://www.libsdl.org/projects/SDL_net/release-1.2.html SDL_net 1.2]. Optional, for network support on Windows 95/98/ME.
** You need the latest SDL_net source code ([https://www.libsdl.org/projects/SDL_net/release/SDL_net-1.2.8.tar.gz v1.2.8] at the time of writing).
 
* [https://sourceforge.net/projects/pkgconfiglite/ pkg-config-lite].
** You need the latest Win32 binary ([https://sourceforge.net/projects/pkgconfiglite/files/0.28-1/pkg-config-lite-0.28-1_bin-win32.zip/download v0.28-1] at the time of writing).
 
* [http://www.nasm.us/pub/nasm/releasebuilds/?C=M;O=D NASM]. Optional, for faster compile of scalers
** You need the latest Win32 binary ([http://www.nasm.us/pub/nasm/releasebuilds/2.15.05/win32/ v2.15.05] at the time of writing).


Downloading MinGW for the first time can be a daunting task, as there are a lot of packages to download. The ones you need are in the "Current" section (apart from MinGW-5.0.0.exe, which is in the "Proposed" section).  
* [https://cmake.org/ CMake]. Optional, for compiling libjpeg-turbo, FluidLite and mbedTLS.
** You need the latest Win32 installer.


Download the following:
* [https://xiph.org/flac/download.html FLAC]. Optional, for FLAC support
** You need the latest flac source code ([http://downloads.xiph.org/releases/flac/flac-1.3.3.tar.xz v1.3.3] at the time of writing).


*[http://prdownloads.sf.net/mingw/MinGW-5.0.0.exe?download The MinGW automated installer 5.0.0]
* [http://downloads.xiph.org/releases/ogg/ libogg] and [http://downloads.xiph.org/releases/vorbis/ libvorbis] Optional, for OGG support
*[http://prdownloads.sf.net/mingw/MSYS-1.0.10.exe?download MSYS 1.0.10]
** You need the latest libogg source code ([https://downloads.xiph.org/releases/ogg/libogg-1.3.5.tar.xz v1.3.5] at the time of writing).
*[http://prdownloads.sf.net/mingw/msysDTK-1.0.1.exe?download msysDTK]
** You need the latest libvorbis (not vorbis) source code ([https://downloads.xiph.org/releases/vorbis/libvorbis-1.3.7.tar.xz v1.3.7] at the time of writing).


* [ftp://ftp.mars.org/pub/mpeg/ libmad] Optional, for MP3 support
** You need the latest libmad source code ([ftp://ftp.mars.org/pub/mpeg/libmad-0.15.1b.tar.gz v0.15.1b] at the time of writing).


The following are downloaded through the automated installer, but you can install them here to have everything ready:
* [http://libmpeg2.sourceforge.net/ libmpeg2] Optional, for MPEG2 cutscene support.
** You need the latest libmpeg2 source code, ([http://libmpeg2.sourceforge.net/files/libmpeg2-0.5.1.tar.gz v0.5.1] at the time of writing).


*[http://prdownloads.sf.net/mingw/binutils-2.15.91-20040904-1.tar.gz?download binutils]
* [http://downloads.xiph.org/releases/theora/ libtheora]. Optional, for Broken Sword 2.5.
*[http://prdownloads.sf.net/mingw/gcc-core-3.4.2-20040916-1.tar.gz?download gcc-core]
** You need the latest libtheora source code ([https://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2 v1.1.1] at the time of writing).
*[http://prdownloads.sf.net/mingw/gcc-g++-3.4.2-20040916-1.tar.gz?download gcc-g++]
*[http://prdownloads.sf.net/mingw/mingw32-make-3.80.0-3.tar.gz?download mingw32-make]
*[http://prdownloads.sf.net/mingw/mingw-runtime-3.8.tar.gz?download mingw-runtime 3.8] (downloaded automatically) OR [http://prdownloads.sf.net/mingw/mingw-runtime-3.9.tar.gz?download mingw-runtime 3.9] (the current version)
*[http://prdownloads.sf.net/mingw/w32api-3.3.tar.gz?download w32api 3.3] (downloaded automatically) OR [http://prdownloads.sf.net/mingw/w32api-3.5.tar.gz?download w32api 3.5] (the current version)


* [https://github.com/knik0/faad2 libfaad2]. Optional, for AAC support.
** You need the latest libfaad2 source code ([https://github.com/knik0/faad2/releases/tag/2_10_0 v2.10.0] at the time of writing).


Note that the above downloads are the current ones, and can change in the future. To get the latest versions (if one of the links above is broken), visit the [http://www.mingw.org/download.shtml MinGW download page] and download the latest versions there. The latest packages for MinGW (but not MSYS) can be downloaded through the automated installer MinGW-5.0.0.exe.
* [http://www.libpng.org/pub/png/libpng.html libpng]. Optional, for PNG support.
** You need the latest libpng source code ([https://download.sourceforge.net/libpng/libpng-1.6.37.tar.xz v1.6.37] at the time of writing).


* [http://giflib.sourceforge.net/ giflib]. Optional, for GIF support.
** You need at least [https://downloads.sourceforge.net/giflib/giflib-5.1.4.tar.gz v5.1.4].


Check the "'''Installing MinGW and MSYS'''" section below for instructions on how to create your ScummVM compilation environment
* [http://download.savannah.gnu.org/releases/freetype/ freetype]. Optional, for TTF support.
** You need the latest freetype source code ([http://download.savannah.gnu.org/releases/freetype/freetype-2.11.1.tar.xz v2.11.1] at the time of writing).


* [https://github.com/divideconcept/FluidLite FluidLite]. Optional, for soundfont MIDI support.
** You need the latest FluidLite source code revision from GitHub ([https://github.com/divideconcept/FluidLite/tree/acc2183fdcb9af2aca233bcfdafd5f657dce33f8 acc2183fdcb9af2aca233bcfdafd5f657dce33f8] at the time of writing).


=== Libraries needed ===
* [https://github.com/fribidi/fribidi FriBiDi]. Optional, for bidirectional text in languages that need it (e.g. Hebrew)
** You need the latest FriBiDi source code ([https://github.com/fribidi/fribidi/releases/tag/v1.0.11 v1.0.11] at the time of writing).
 
* [https://libjpeg-turbo.org/ libjpeg-turbo]. Optional, for JPEG support.
** You need the latest libjpeg-turbo source code ([https://sourceforge.net/projects/libjpeg-turbo/files/2.1.0/libjpeg-turbo-2.1.2.tar.gz/download v2.1.2] at the time of writing).
 
* [http://liba52.sourceforge.net/ liba52]. Optional, for AC-3 support.
** You need the latest liba52 source code ([http://liba52.sourceforge.net/files/a52dec-0.7.4.tar.gz v0.7.4] at the time of writing).
 
* [https://tls.mbed.org/ mbedTLS]. Optional, for cloud support.
** You need the latest mbedTLS source code ([https://github.com/ARMmbed/mbedtls/archive/v3.0.0.tar.gz v3.0.0] at the time of writing).


* [http://www.libsdl.org/download-1.2.php SDL 1.2].  
* [https://curl.se/ libcurl]. Optional, for cloud support.
You need the file SDL-devel-1.2.9-mingw32.tar.gz (1.2.9 is the latest version at this time)  
** You need the latest libcurl source code ([https://curl.se/download/curl-7.80.0.tar.xz v7.80.0] at the time of writing).


* [http://www.kernel.org/pub/software/devel/nasm/binaries/win32/ NASM]
==== Precompiled libraries ====
To ease the whole process, a package of all the needed precompiled libraries has been created.
All you need to do is:
* Download the precompiled libraries and the [http://www.libsdl.org/release/SDL-1.2.15-win32.zip latest SDL runtime library] - latest version is 1.2.15 at the time this was written, you can find the latest version [http://www.libsdl.org/download-1.2.php here]. Precompiled libraries:
** [http://downloads.scummvm.org/frs/build/scummvm-required-libs-mingw.zip Precompiled libraries]
* Extract them to your MinGW directory (e.g. C:\MinGW)


* [http://downloads.xiph.org/releases/ogg/ libogg] and [http://downloads.xiph.org/releases/vorbis/ libvorbis] for OGG support
== MSYS primer ==


Note that the libraries included in the "vorbis" package won't work. You need libogg and libvorbis, not vorbis
From the developer's webpage: "MSYS or Minimal SYStem is a POSIX and Bourne shell environment use with MinGW. It provides a hand picked set of tools to allow a typical configuration script with Bourne syntax to execute. This allows most of the GNU packages to create a Makefile just from executing the typical configure script which can then be used to build the package using the native MinGW version of GCC".


* [ftp://ftp.mars.org/pub/mpeg/ libmad] for MP3 support


* [http://libmpeg2.sourceforge.net/downloads.html libmpeg2] for MPEG-2 support
MSYS commands can be confusing for people using Windows, as MSYS emulates a Bourne shell environment, which is found in most Unix/Linux distributions. The available commands can be viewed by typing "help" in the command prompt. Help on a specific command is available by typing "help" followed by the command, e.g. "help alias".


Get the latest mpeg2dec release from this page, libmpeg2 is included there


* [http://www.zlib.net/ zlib]. You need the latest zlib source code. 
Note that MSYS uses forward slashes between folder names, not backward slashes, as is the case with Windows. Additionally, some special characters like the space need to be escaped with a backward slash("\"). Drives are mounted to folders, so drive "C:" would be under folder "/c". Therefore, to switch to directory:


* [http://flac.sourceforge.net/download.html FLAC]. You need the latest full source code (1.1.2). However, bear in mind that the latest version (1.1.2) has a lot of changes over the previous one (1.1.1), which is the recommended version. Therefore, you are advised to download the full source code of version 1.1.1 from the [http://sourceforge.net/project/showfiles.php?group_id=13478 older versions of FLAC] link
C:\Program Files\Test Folder


we would switch to:


== Installing MinGW and MSYS ==
/c/Program\ Files/Test\ Folder


Both MinGW and MSYS need to be installed and working to compile ScummVM.
The basic commands you'll need are:




* First, install MinGW through its automated installer.
cd - changes the current drive and directory
* Then, install MSYS. After installation, a new console window will appear, asking if you wish to proceed with the post install. Answer 'y' to that prompt. You will then be asked if you have MinGW installed. Answer 'y' to that and then type in the path of your MinGW directory using forward slashes (e.g. C:/MinGW). Make sure that there is no "make" utility in the MinGW bin folder, as this will clash with the make utility in MSYS. With the recent packages described in the section above, you shouldn't have that problem.
pwd - shows the current drive and directory
* After both MinGW and MSYS are installed correctly, install MSYS DTK
ls - lists files in a folder
make - makefile, used to compile projects
strip - remove debug information from executable files




== MSYS primer ==
Note that if you wish to run a file from the current folder, you need to specify it before the file name, i.e. if you wish to run "test" from the current folder, you should type:


[TODO: describe how to navigate through folders, which tools will be used]
./test




Line 81: Line 136:
=== NASM ===
=== NASM ===


First of all, we need nasm. So unzip the nasm archive in a directory, copy "nasmw.exe" to "nasm.exe" (because some projects call one and others call the other) and include the folder it is stored in into your system path. To do this, go to Control Panel->System, Advanced tab->environment variables and edit the "PATH" variable in the system variables list, adding the folder where you placed the aforementioned files. Directories in the system path are split with a semicolon (;), e.g. "C:\MinGW\msys\1.0\bin;C:\MinGW\bin;C:\nasm". Alternatively, you can just copy both files in MinGW's bin directory, e.g. C:\MinGW\bin as this should be already in your system path
Unzip the nasm archive in a folder, and copy both files to MinGW's bin directory.
 
 
=== pkg-config-lite ===
 
Unzip the pkg-config-lite archive in a folder, and copy the "bin" and "share" to MinGW's root directory.
 
 
=== SDL1 ===
 
Unzip the SDL archive in a folder, open MSYS, go to the SDL folder and issue these commands to compile and install the library:
 
./configure --disable-shared --prefix=/mingw
make
make install
 
Note the README [http://www.libsdl.org/extras/win32/mingw32/README.txt here], especially the need to include the DirectX development headers from [http://www.libsdl.org/extras/win32/common/directx-devel.tar.gz here] to ensure that the "dsound" rather than the "waveout" / "winmm" fallback audio driver is used.
 
 
=== SDL2 ===


Changes to the PATH will be reflected on newly opened command prompts only, so if you got any open already, close them to avoid confusion
Note that a prebuilt version of SDL2 is required since MinGW32 doesn't have all the necessary Windows SDK headers.


Unzip the SDL2 archive in a folder, open MSYS, go to the SDL2 folder and issue this command to install the library:


=== SDL ===
make install-package arch=i686-w64-mingw32 prefix=/mingw


SDL is already compiled and needs no further changes, so we can skip the compilation step for it


=== libogg ===


After extracting the contents of the SDL archive in a folder, copy all the files in SDL's include folder in MinGW's include folder and all the files in SDL's lib folder in MinGW's lib folder. Also, copy SDL.dll and i386-mingw32msvc-sdl-config in MinGW's bin folder. Rename i386-mingw32msvc-sdl-config to sdl-config
libogg should be compiled before libvorbis, libtheora and libFLAC.


Unzip the libogg archive in a folder, open MSYS, go to the libogg folder and issue these commands to compile and install the library:


Now, we need to setup SDL. Go to SDL's folder and type 'make install prefix=/mingw' (note the forward slash, since you are using MSYS).
./configure --disable-shared --prefix=/mingw
make
make install




=== zlib ===
=== libvorbis ===


Unzip the source code in a folder, open MSYS, go to the zlib folder and issue this command to compile the library:
Unzip the libvorbis archive in a folder, open MSYS, go to the libvorbis folder and issue these commands to compile and install the library:


  make -f win32/makefile.gcc
  ./configure --disable-shared --prefix=/mingw
make
make install


After compilation, copy '''zlib.h''' and '''zconf.h''' inside MinGW's include folder and libz.a inside MinGW's lib folder


=== libmad ===


You can do this using Explorer or by typing these commands in MSYS inside the zlib folder:
Unzip the libmad archive in a folder, open MSYS and go to the libmad folder and issue these commands to compile and install the library:
sed -i '/-fforce-mem/d' configure
./configure --disable-shared --prefix=/mingw
make
make install


cp -p libz.a /mingw/lib
cp -p zlib.h zconf.h /mingw/include


=== libmpeg2 ===


=== libogg ===
Unzip the libmpeg2 archive into a folder, open MSYS, go to the libmpeg2 folder and issue these commands to compile and install the library:
sed -i -e '/AC_C_ALWAYS_INLINE/d' -e 's/-mcpu/-mtune/' configure.ac
./bootstrap
./configure --disable-sdl --disable-shared --prefix=/mingw
make
make install
 
 
=== FLAC ===
 
Unzip the flac archive in a folder, open MSYS, go to the flac folder and issue these commands to compile and install the library:
 
./configure --disable-shared --prefix=/mingw
make
make install
 
 
=== FluidLite ===
 
Unzip the fluidlite archive in a folder, open MSYS, go to the fluidlite folder and issue these commands to compile and install the library:
 
cmake -G "MSYS Makefiles" -DFLUIDLITE_BUILD_SHARED=OFF -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release .
make
make install
 
 
=== libpng ===
 
Unzip the libpng archive in a folder, open MSYS, go to the libpng folder and issue these commands to compile and install the library:
 
./configure --disable-shared --prefix=/mingw
make pnglibconf.h
sed -i 's/\x0D//' pnglibconf.h
make
make install
 
 
=== giflib ===
 
Unzip the giflib archive in a folder, open MSYS, go to the giflib folder and issue these commands to compile and install the library:
 
./configure --disable-shared --prefix=/mingw
make
make install
 
 
=== libtheora ===


libogg should be compiled before libvorbis and libFLAC
Unzip the libtheora archive in a folder, open MSYS, go to the libtheora folder and issue these commands to compile and install the library:
Unzip the libogg archive in a folder, open MSYS, go to the libogg folder and issue these commands to compile the library:


  ./configure --disable-shared
  ./configure --disable-shared --disable-examples --prefix=/mingw
  make
  make
make install


When everything is compiled, copy the include\ogg folder inside MinGW's include folder. So, you should end up with an ogg folder in MinGW's include folder. Also, copy the src\.libs folder as-is inside MinGW's lib folder, and also copy the files from the src\.libs folder inside MinGW's lib folder (because ogg libraries are searched both in the lib and in the lib\.libs folder)


=== libfaad2 ===
Unzip the libfaad2 archive in a folder, open MSYS, go to the libfaad2 folder and issue these commands to compile and install the library:
./bootstrap
./configure --disable-shared --prefix=/mingw
make
make install


You can do this using Explorer or by typing these commands in MSYS inside the libogg folder:


cp -p include/ogg /mingw/include
=== freetype ===
cp -p src/.libs /mingw/lib
cp -p src/.libs/* /mingw/lib


Unzip the freetype archive in a folder, open MSYS, go to the freetype folder and apply the following patch:


=== libvorbis ===
<syntaxhighlight lang="diff">
diff --git a/builds/windows/ftsystem.c b/builds/windows/ftsystem.c
index 1ebadd49ff8254414906ef1538b4b54ac0950941..20fe9f1916849ead5e472076a0e1b1625f0e17d6 100644
--- a/builds/windows/ftsystem.c
+++ b/builds/windows/ftsystem.c
@@ -233,6 +233,10 @@
                        dwFlagsAndAttributes, hTemplateFile );
  }
+#endif /* _WIN32_WCE */
+
+#if defined _WIN32_WCE || defined _WIN32_WINDOWS || \
+    !defined _WIN32_WINNT || _WIN32_WINNT <= 0x0400
  FT_LOCAL_DEF( BOOL )
  GetFileSizeEx( HANDLE        hFile,
@@ -248,7 +252,7 @@
      return TRUE;
  }
-#endif /* _WIN32_WCE */
+#endif
  /* documentation is in ftobjs.h */
</syntaxhighlight>


Unzip the libvorbis archive in a folder, open MSYS, go to the libvorbis folder and issue these commands to compile the library:
Then issue these commands to compile and install the library:


  ./configure --disable-shared
  ./configure --disable-shared --prefix=/mingw
  make
  make
make install


When everything is compiled, copy the include\vorbis folder inside MinGW's include folder. So, you should end up with a vorbis folder in MinGW's include folder. Also, copy lib\.libs folder from libvorbis folder as-is inside MinGW's lib folder, and also copy the files from the lib\.libs folder from libvorbis folder inside MinGW's lib folder (because vorbis libraries are searched both in the lib and in the lib\.libs folder)


=== fribidi ===


You can do this using Explorer or by typing these commands in MSYS inside the libvorbis folder:
Unzip the fribidi archive in a folder, open MSYS, go to the fribidi folder and apply the following patch:


  cp -p include/vorbis /mingw/include
<syntaxhighlight lang="diff">
  cp -p src/.libs /mingw/lib
--- fribidi.pc.in.orig 2020-07-05 20:17:23 +0100
cp -p src/.libs/* /mingw/lib
+++ fribidi.pc.in      2020-08-30 17:17:43 +0100
@@ -9,5 +9,4 @@
Description: Unicode Bidirectional Algorithm Library
Version: @VERSION@
  Libs: -L${libdir} -lfribidi
-Cflags: -I${includedir}/@PACKAGE@
-CFLAGS.private: -DFRIBIDI_LIB_STATIC
+Cflags: -I${includedir}/@PACKAGE@ -DFRIBIDI_LIB_STATIC
</syntaxhighlight>


Then issue these commands to compile and install the library:


=== libmpeg2 ===
./configure --disable-shared --prefix=/mingw
make
make install
 
 
=== libjpeg-turbo ===
 
Unzip the libjpeg-turbo archive in a folder, open MSYS, go to the libjpeg-turbo folder and issue these commands to compile and install the library:
 
cmake -G "MSYS Makefiles" -DENABLE_SHARED=OFF -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release .
make
make install
 
 
=== liba52 ===


Unzip the mpeg2dec archive in a folder, open MSYS, go to the mpeg2dec folder and issue these commands to compile the library:
Unzip the liba52 archive into a folder, open MSYS, go to the liba52 folder and issue these commands to compile and install the library:


  ./configure --disable-shared
rm -f autotools/{config.guess,config.sub,install-sh,ltmain.sh,missing,mkinstalldirs} {autotools,doc,include,liba52,libao,src,test,vc++,.}/Makefile.in include/config.h.in include/stamp-h.in aclocal.m4 configure
sed -i -e '/AC_C_ALWAYS_INLINE/d' -e 's/-mcpu/-mtune/' configure.in
autoreconf -fi
  ./configure --disable-shared --prefix=/mingw
  make
  make
make install
=== SDL_net ===


After you compile mpeg2dec, go to its include directory, create a folder "mpeg2dec" in there and copy all files from the include folder in this subfolder. So you should end up with 2 directories, "include" and "include\mpeg2dec" with the same files. This is needed, as ScummVM includes files from the "mpeg2dec" directory. Copy this mpeg2dec folder inside MinGW's include folder. Then, copy lib\.libs folder from libmpeg2 folder as-is inside MinGW's lib folder, and also copy the files from the lib\.libs folder from libmpeg2 folder inside MinGW's lib folder (because libmpeg2 libraries are searched both in the lib and in the lib\.libs folder)
Unzip the SDL_net archive in a folder, open MSYS, go to the SDL_net folder and apply the following patch:


<syntaxhighlight lang="diff">
--- SDL_net.pc.in.orig  2012-01-15 16:20:10 +0000
+++ SDL_net.pc.in      2020-08-30 17:42:19 +0100
@@ -7,5 +7,5 @@
Description: net library for Simple DirectMedia Layer
Version: @VERSION@
Requires: sdl >= @SDL_VERSION@
-Libs: -L${libdir} -lSDL_net
+Libs: -L${libdir} -lSDL_net @INETLIB@
Cflags: -I${includedir}/SDL
</syntaxhighlight>


You can do this using Explorer or by typing these commands in MSYS inside the mpeg2dec folder:
Then issue these commands to compile and install the library:


  mkdir include/mpeg2dec
  ./configure --disable-shared --prefix=/mingw
cp -p include/* include/mpeg2dec
  make
cp -p include/mpeg2dec /mingw/include
  make install
  cp -p libmpeg2/.libs /mingw/lib
  cp -p libmpeg2/.libs/* /mingw/lib




=== libmad ===
=== SDL2_net ===
 
Unzip the SDL2_net archive in a folder, open MSYS, go to the SDL2_net folder and apply the following patch:
 
<syntaxhighlight lang="diff">
--- SDL2_net.pc.in.orig 2016-01-03 07:57:09 +0000
+++ SDL2_net.pc.in      2020-08-30 17:45:28 +0100
@@ -7,5 +7,5 @@
Description: net library for Simple DirectMedia Layer
Version: @VERSION@
Requires: sdl2 >= @SDL_VERSION@
-Libs: -L${libdir} -lSDL2_net
+Libs: -L${libdir} -lSDL2_net @INETLIB@
Cflags: -I${includedir}/SDL2
EOF
</syntaxhighlight>


Unzip the libmad archive in a folder, open MSYS, go to the libmad folder and issue these commands to compile the library:
Then issue these commands to compile and install the library:


  ./configure --disable-shared
  ./configure --disable-shared --prefix=/mingw
  make
  make
make install


[TODO]


=== mbedTLS ===


=== FLAC ===
Unzip the mbedTLS archive in a folder, open MSYS, go to the mbedtls folder and apply the following patch:


The latest version of FLAC (1.1.2) has a lot of changes over the previous one (1.1.1), which is the recommended version. Therefore, you are advised to use version 1.1.1 with ScummVM
<syntaxhighlight lang="diff">
--- library/platform_util.c.orig        2020-12-10 12:55:25 +0000
+++ library/platform_util.c    2021-03-08 23:59:37 +0000
@@ -92,9 +92,11 @@
  * threading.h. However, this macro is not part of the Mbed TLS public API, so
  * we keep it private by only defining it in this file
  */
-#if ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) )
+#if ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) || \
+      ( defined(__MINGW32__) && !defined(__MINGW64_VERSION_MAJOR) )
#define PLATFORM_UTIL_USE_GMTIME
-#endif /* ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) */
+#endif /* ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) || \
+            (defined(__MINGW32__) && !defined(__MINGW64_VERSION_MAJOR) ) */


#endif /* !( ( defined(_POSIX_VERSION) && _POSIX_VERSION >= 200809L ) ||    \
              ( defined(_POSIX_THREAD_SAFE_FUNCTIONS ) &&                    \
@@ -103,7 +105,7 @@
struct tm *mbedtls_platform_gmtime_r( const mbedtls_time_t *tt,
                                      struct tm *tm_buf )
{
-#if defined(_WIN32) && !defined(EFIX64) && !defined(EFI32)
+#if defined(_WIN32) && !defined(PLATFORM_UTIL_USE_GMTIME)
    return( ( gmtime_s( tm_buf, tt ) == 0 ) ? tm_buf : NULL );
#elif !defined(PLATFORM_UTIL_USE_GMTIME)
    return( gmtime_r( tt, tm_buf ) );
</syntaxhighlight>


Unzip the flac archive in a folder, open MSYS, go to the flac folder and issue these commands to compile the library:
Then issue these commands to compile and install the library:


  ./configure --disable-shared
  CPPFLAGS=-D_WIN32_WINNT=0x400 cmake -G "MSYS Makefiles" -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release -DENABLE_PROGRAMS=OFF -DENABLE_TESTING=OFF .
  make
  make
make install
=== libcurl ===
Unzip the curl archive in a folder, open MSYS, go to the curl folder and apply the following patch:
<syntaxhighlight lang="diff">
--- lib/vtls/schannel_verify.c.orig    2021-11-01 09:40:00 +0000
+++ lib/vtls/schannel_verify.c  2021-12-06 15:19:38 +0000
@@ -222,11 +222,12 @@
{
  CURLcode result;
  HANDLE ca_file_handle = INVALID_HANDLE_VALUE;
-  LARGE_INTEGER file_size;
+  ULARGE_INTEGER file_size;
  char *ca_file_buffer = NULL;
  TCHAR *ca_file_tstr = NULL;
  size_t ca_file_bufsize = 0;
  DWORD total_bytes_read = 0;
+  DWORD last_error = NO_ERROR;
  ca_file_tstr = curlx_convert_UTF8_to_tchar((char *)ca_file);
  if(!ca_file_tstr) {
@@ -261,12 +262,14 @@
    goto cleanup;
  }
-  if(!GetFileSizeEx(ca_file_handle, &file_size)) {
+  file_size.u.LowPart = GetFileSize(ca_file_handle, &file_size.u.HighPart);
+  last_error = GetLastError();
+  if(file_size.u.LowPart == INVALID_FILE_SIZE && last_error != NO_ERROR) {
    char buffer[STRERROR_LEN];
    failf(data,
          "schannel: failed to determine size of CA file '%s': %s",
          ca_file,
-          Curl_winapi_strerror(GetLastError(), buffer, sizeof(buffer)));
+          Curl_winapi_strerror(last_error, buffer, sizeof(buffer)));
    result = CURLE_SSL_CACERT_BADFILE;
    goto cleanup;
  }
</syntaxhighlight>


[TODO]
Then issue these commands to compile and install the library:
 
CPPFLAGS=-D_WIN32_WINNT=0x400 ./configure --disable-shared --prefix=/mingw --with-schannel --with-mbedtls --disable-pthreads --disable-ldap
make
make install




== Compiling ScummVM ==
== Compiling ScummVM ==


[TODO]
To compile ScummVM, issue the following commands inside the scummvm folder (where Makefile resides):
./configure
make


After compilation, you'll end up with a very big scummvm.exe (around 16MB). This is because debug symbols and information are embedded by default in the exe file, making it very big. To remove all the unneeded debug information from the executable, thus reducing its size by about 12MB, go to the folder where the compiled scummvm.exe file is and run the following command:
After compilation, you'll end up with a very big scummvm.exe (around 16MB). This is because debug symbols and information are embedded by default in the exe file, making it very big. To remove all the unneeded debug information from the executable, thus reducing its size by about 12MB, go to the folder where the compiled scummvm.exe file is and run the following command:
Line 197: Line 484:
  strip scummvm.exe
  strip scummvm.exe


== Compiling with Console/Text Output ==
By default, ScummVM now compiles with console output. If for some reason you do NOT want console output (which was the default behavior until recently), use the following flag when running the configure script:
./configure --disable-windows-console
== Compiling with Windows 95/98/ME support ==
By default, ScummVM builds using this method require Windows XP or later. If you want compatibility with older versions of Windows, use the following commands to compile ScummVM:
SDL_CONFIG=sdl-config ./configure --disable-windows-unicode --disable-flac --disable-libcurl
make


== Ready to go! ==
== Ready to go! ==


OK this should be all of it (thankfully), so you should be good to go.
OK this should be all of it (thankfully), so you should be good to go.

Latest revision as of 11:25, 7 August 2022

NOTE
Compiling with MinGW is more complicated to set up. It is recommended that you use MinGW-w64 or Docker instead, which are far easier to set up and get working.

Compiling ScummVM with Minimalist GNU for Windows (MinGW)

MinGW is "a collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs".

More information can be found at the MinGW homepage. See also MinGW-w64.

Things needed

MinGW and MSYS

  • Download and install the latest MinGW Installation Manager (mingw-get-setup.exe)
  • From the list of packages shown, check mingw-developer-toolkit-bin, mingw32-base-bin and mingw32-gcc-g++-bin, as well as mingw32-libz-dev from the "MinGW Libraries" section (right-click > Mark for Installation)
  • Click the Installation > Apply Changes menu to install MinGW and MSYS
  • Once installation is complete, you can run MSYS from inside the MinGW directory (by default C:\MinGW\msys\1.0\msys.bat)

Libraries needed

  • SDL2.
    • You need the latest SDL2 development libraries: (v2.0.18 at the time of writing).
  • SDL2_net. Optional, for network support.
    • You need the latest SDL2_net source code (v2.0.1 at the time of writing).
  • SDL_net 1.2. Optional, for network support on Windows 95/98/ME.
    • You need the latest SDL_net source code (v1.2.8 at the time of writing).
  • NASM. Optional, for faster compile of scalers
    • You need the latest Win32 binary (v2.15.05 at the time of writing).
  • CMake. Optional, for compiling libjpeg-turbo, FluidLite and mbedTLS.
    • You need the latest Win32 installer.
  • FLAC. Optional, for FLAC support
    • You need the latest flac source code (v1.3.3 at the time of writing).
  • libogg and libvorbis Optional, for OGG support
    • You need the latest libogg source code (v1.3.5 at the time of writing).
    • You need the latest libvorbis (not vorbis) source code (v1.3.7 at the time of writing).
  • libmad Optional, for MP3 support
    • You need the latest libmad source code (v0.15.1b at the time of writing).
  • libmpeg2 Optional, for MPEG2 cutscene support.
    • You need the latest libmpeg2 source code, (v0.5.1 at the time of writing).
  • libtheora. Optional, for Broken Sword 2.5.
    • You need the latest libtheora source code (v1.1.1 at the time of writing).
  • libfaad2. Optional, for AAC support.
    • You need the latest libfaad2 source code (v2.10.0 at the time of writing).
  • libpng. Optional, for PNG support.
    • You need the latest libpng source code (v1.6.37 at the time of writing).
  • giflib. Optional, for GIF support.
  • freetype. Optional, for TTF support.
    • You need the latest freetype source code (v2.11.1 at the time of writing).
  • FriBiDi. Optional, for bidirectional text in languages that need it (e.g. Hebrew)
    • You need the latest FriBiDi source code (v1.0.11 at the time of writing).
  • libjpeg-turbo. Optional, for JPEG support.
    • You need the latest libjpeg-turbo source code (v2.1.2 at the time of writing).
  • liba52. Optional, for AC-3 support.
    • You need the latest liba52 source code (v0.7.4 at the time of writing).
  • mbedTLS. Optional, for cloud support.
    • You need the latest mbedTLS source code (v3.0.0 at the time of writing).
  • libcurl. Optional, for cloud support.
    • You need the latest libcurl source code (v7.80.0 at the time of writing).

Precompiled libraries

To ease the whole process, a package of all the needed precompiled libraries has been created. All you need to do is:

  • Download the precompiled libraries and the latest SDL runtime library - latest version is 1.2.15 at the time this was written, you can find the latest version here. Precompiled libraries:
  • Extract them to your MinGW directory (e.g. C:\MinGW)

MSYS primer

From the developer's webpage: "MSYS or Minimal SYStem is a POSIX and Bourne shell environment use with MinGW. It provides a hand picked set of tools to allow a typical configuration script with Bourne syntax to execute. This allows most of the GNU packages to create a Makefile just from executing the typical configure script which can then be used to build the package using the native MinGW version of GCC".


MSYS commands can be confusing for people using Windows, as MSYS emulates a Bourne shell environment, which is found in most Unix/Linux distributions. The available commands can be viewed by typing "help" in the command prompt. Help on a specific command is available by typing "help" followed by the command, e.g. "help alias".


Note that MSYS uses forward slashes between folder names, not backward slashes, as is the case with Windows. Additionally, some special characters like the space need to be escaped with a backward slash("\"). Drives are mounted to folders, so drive "C:" would be under folder "/c". Therefore, to switch to directory:

C:\Program Files\Test Folder

we would switch to:

/c/Program\ Files/Test\ Folder

The basic commands you'll need are:


cd - changes the current drive and directory
pwd - shows the current drive and directory
ls - lists files in a folder
make - makefile, used to compile projects
strip - remove debug information from executable files


Note that if you wish to run a file from the current folder, you need to specify it before the file name, i.e. if you wish to run "test" from the current folder, you should type:

./test


Building the libraries

Now, we need to compile the required libraries and tools.


NASM

Unzip the nasm archive in a folder, and copy both files to MinGW's bin directory.


pkg-config-lite

Unzip the pkg-config-lite archive in a folder, and copy the "bin" and "share" to MinGW's root directory.


SDL1

Unzip the SDL archive in a folder, open MSYS, go to the SDL folder and issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install

Note the README here, especially the need to include the DirectX development headers from here to ensure that the "dsound" rather than the "waveout" / "winmm" fallback audio driver is used.


SDL2

Note that a prebuilt version of SDL2 is required since MinGW32 doesn't have all the necessary Windows SDK headers.

Unzip the SDL2 archive in a folder, open MSYS, go to the SDL2 folder and issue this command to install the library:

make install-package arch=i686-w64-mingw32 prefix=/mingw


libogg

libogg should be compiled before libvorbis, libtheora and libFLAC.

Unzip the libogg archive in a folder, open MSYS, go to the libogg folder and issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


libvorbis

Unzip the libvorbis archive in a folder, open MSYS, go to the libvorbis folder and issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


libmad

Unzip the libmad archive in a folder, open MSYS and go to the libmad folder and issue these commands to compile and install the library:

sed -i '/-fforce-mem/d' configure
./configure --disable-shared --prefix=/mingw
make
make install


libmpeg2

Unzip the libmpeg2 archive into a folder, open MSYS, go to the libmpeg2 folder and issue these commands to compile and install the library:

sed -i -e '/AC_C_ALWAYS_INLINE/d' -e 's/-mcpu/-mtune/' configure.ac
./bootstrap
./configure --disable-sdl --disable-shared --prefix=/mingw
make
make install


FLAC

Unzip the flac archive in a folder, open MSYS, go to the flac folder and issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


FluidLite

Unzip the fluidlite archive in a folder, open MSYS, go to the fluidlite folder and issue these commands to compile and install the library:

cmake -G "MSYS Makefiles" -DFLUIDLITE_BUILD_SHARED=OFF -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release .
make
make install


libpng

Unzip the libpng archive in a folder, open MSYS, go to the libpng folder and issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make pnglibconf.h
sed -i 's/\x0D//' pnglibconf.h
make
make install


giflib

Unzip the giflib archive in a folder, open MSYS, go to the giflib folder and issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


libtheora

Unzip the libtheora archive in a folder, open MSYS, go to the libtheora folder and issue these commands to compile and install the library:

./configure --disable-shared --disable-examples --prefix=/mingw
make
make install


libfaad2

Unzip the libfaad2 archive in a folder, open MSYS, go to the libfaad2 folder and issue these commands to compile and install the library:

./bootstrap
./configure --disable-shared --prefix=/mingw
make
make install


freetype

Unzip the freetype archive in a folder, open MSYS, go to the freetype folder and apply the following patch:

diff --git a/builds/windows/ftsystem.c b/builds/windows/ftsystem.c
index 1ebadd49ff8254414906ef1538b4b54ac0950941..20fe9f1916849ead5e472076a0e1b1625f0e17d6 100644
--- a/builds/windows/ftsystem.c
+++ b/builds/windows/ftsystem.c
@@ -233,6 +233,10 @@
                         dwFlagsAndAttributes, hTemplateFile );
   }
 
+#endif /* _WIN32_WCE */
+
+#if defined _WIN32_WCE || defined _WIN32_WINDOWS || \
+    !defined _WIN32_WINNT || _WIN32_WINNT <= 0x0400
 
   FT_LOCAL_DEF( BOOL )
   GetFileSizeEx( HANDLE         hFile,
@@ -248,7 +252,7 @@
       return TRUE;
   }
 
-#endif /* _WIN32_WCE */
+#endif
 
 
   /* documentation is in ftobjs.h */

Then issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


fribidi

Unzip the fribidi archive in a folder, open MSYS, go to the fribidi folder and apply the following patch:

--- fribidi.pc.in.orig  2020-07-05 20:17:23 +0100
+++ fribidi.pc.in       2020-08-30 17:17:43 +0100
@@ -9,5 +9,4 @@
 Description: Unicode Bidirectional Algorithm Library
 Version: @VERSION@
 Libs: -L${libdir} -lfribidi
-Cflags: -I${includedir}/@PACKAGE@
-CFLAGS.private: -DFRIBIDI_LIB_STATIC
+Cflags: -I${includedir}/@PACKAGE@ -DFRIBIDI_LIB_STATIC

Then issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


libjpeg-turbo

Unzip the libjpeg-turbo archive in a folder, open MSYS, go to the libjpeg-turbo folder and issue these commands to compile and install the library:

cmake -G "MSYS Makefiles" -DENABLE_SHARED=OFF -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release .
make
make install


liba52

Unzip the liba52 archive into a folder, open MSYS, go to the liba52 folder and issue these commands to compile and install the library:

rm -f autotools/{config.guess,config.sub,install-sh,ltmain.sh,missing,mkinstalldirs} {autotools,doc,include,liba52,libao,src,test,vc++,.}/Makefile.in include/config.h.in include/stamp-h.in aclocal.m4 configure
sed -i -e '/AC_C_ALWAYS_INLINE/d' -e 's/-mcpu/-mtune/' configure.in
autoreconf -fi
./configure --disable-shared --prefix=/mingw
make
make install


SDL_net

Unzip the SDL_net archive in a folder, open MSYS, go to the SDL_net folder and apply the following patch:

--- SDL_net.pc.in.orig  2012-01-15 16:20:10 +0000
+++ SDL_net.pc.in       2020-08-30 17:42:19 +0100
@@ -7,5 +7,5 @@
 Description: net library for Simple DirectMedia Layer
 Version: @VERSION@
 Requires: sdl >= @SDL_VERSION@
-Libs: -L${libdir} -lSDL_net
+Libs: -L${libdir} -lSDL_net @INETLIB@
 Cflags: -I${includedir}/SDL

Then issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


SDL2_net

Unzip the SDL2_net archive in a folder, open MSYS, go to the SDL2_net folder and apply the following patch:

--- SDL2_net.pc.in.orig 2016-01-03 07:57:09 +0000
+++ SDL2_net.pc.in      2020-08-30 17:45:28 +0100
@@ -7,5 +7,5 @@
 Description: net library for Simple DirectMedia Layer
 Version: @VERSION@
 Requires: sdl2 >= @SDL_VERSION@
-Libs: -L${libdir} -lSDL2_net
+Libs: -L${libdir} -lSDL2_net @INETLIB@
 Cflags: -I${includedir}/SDL2
EOF

Then issue these commands to compile and install the library:

./configure --disable-shared --prefix=/mingw
make
make install


mbedTLS

Unzip the mbedTLS archive in a folder, open MSYS, go to the mbedtls folder and apply the following patch:

--- library/platform_util.c.orig        2020-12-10 12:55:25 +0000
+++ library/platform_util.c     2021-03-08 23:59:37 +0000
@@ -92,9 +92,11 @@
  * threading.h. However, this macro is not part of the Mbed TLS public API, so
  * we keep it private by only defining it in this file
  */
-#if ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) )
+#if ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) || \
+      ( defined(__MINGW32__) && !defined(__MINGW64_VERSION_MAJOR) )
 #define PLATFORM_UTIL_USE_GMTIME
-#endif /* ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) */
+#endif /* ! ( defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) ) || \
+             (defined(__MINGW32__) && !defined(__MINGW64_VERSION_MAJOR) ) */

 #endif /* !( ( defined(_POSIX_VERSION) && _POSIX_VERSION >= 200809L ) ||     \
              ( defined(_POSIX_THREAD_SAFE_FUNCTIONS ) &&                     \
@@ -103,7 +105,7 @@
 struct tm *mbedtls_platform_gmtime_r( const mbedtls_time_t *tt,
                                       struct tm *tm_buf )
 {
-#if defined(_WIN32) && !defined(EFIX64) && !defined(EFI32)
+#if defined(_WIN32) && !defined(PLATFORM_UTIL_USE_GMTIME)
     return( ( gmtime_s( tm_buf, tt ) == 0 ) ? tm_buf : NULL );
 #elif !defined(PLATFORM_UTIL_USE_GMTIME)
     return( gmtime_r( tt, tm_buf ) );

Then issue these commands to compile and install the library:

CPPFLAGS=-D_WIN32_WINNT=0x400 cmake -G "MSYS Makefiles" -DCMAKE_INSTALL_PREFIX=/mingw -DCMAKE_BUILD_TYPE=Release -DENABLE_PROGRAMS=OFF -DENABLE_TESTING=OFF .
make
make install


libcurl

Unzip the curl archive in a folder, open MSYS, go to the curl folder and apply the following patch:

--- lib/vtls/schannel_verify.c.orig     2021-11-01 09:40:00 +0000
+++ lib/vtls/schannel_verify.c  2021-12-06 15:19:38 +0000
@@ -222,11 +222,12 @@
 {
   CURLcode result;
   HANDLE ca_file_handle = INVALID_HANDLE_VALUE;
-  LARGE_INTEGER file_size;
+  ULARGE_INTEGER file_size;
   char *ca_file_buffer = NULL;
   TCHAR *ca_file_tstr = NULL;
   size_t ca_file_bufsize = 0;
   DWORD total_bytes_read = 0;
+  DWORD last_error = NO_ERROR;

   ca_file_tstr = curlx_convert_UTF8_to_tchar((char *)ca_file);
   if(!ca_file_tstr) {
@@ -261,12 +262,14 @@
     goto cleanup;
   }

-  if(!GetFileSizeEx(ca_file_handle, &file_size)) {
+  file_size.u.LowPart = GetFileSize(ca_file_handle, &file_size.u.HighPart);
+  last_error = GetLastError();
+  if(file_size.u.LowPart == INVALID_FILE_SIZE && last_error != NO_ERROR) {
     char buffer[STRERROR_LEN];
     failf(data,
           "schannel: failed to determine size of CA file '%s': %s",
           ca_file,
-          Curl_winapi_strerror(GetLastError(), buffer, sizeof(buffer)));
+          Curl_winapi_strerror(last_error, buffer, sizeof(buffer)));
     result = CURLE_SSL_CACERT_BADFILE;
     goto cleanup;
   }

Then issue these commands to compile and install the library:

CPPFLAGS=-D_WIN32_WINNT=0x400 ./configure --disable-shared --prefix=/mingw --with-schannel --with-mbedtls --disable-pthreads --disable-ldap
make
make install


Compiling ScummVM

To compile ScummVM, issue the following commands inside the scummvm folder (where Makefile resides):

./configure
make

After compilation, you'll end up with a very big scummvm.exe (around 16MB). This is because debug symbols and information are embedded by default in the exe file, making it very big. To remove all the unneeded debug information from the executable, thus reducing its size by about 12MB, go to the folder where the compiled scummvm.exe file is and run the following command:

strip scummvm.exe

Compiling with Console/Text Output

By default, ScummVM now compiles with console output. If for some reason you do NOT want console output (which was the default behavior until recently), use the following flag when running the configure script:

./configure --disable-windows-console

Compiling with Windows 95/98/ME support

By default, ScummVM builds using this method require Windows XP or later. If you want compatibility with older versions of Windows, use the following commands to compile ScummVM:

SDL_CONFIG=sdl-config ./configure --disable-windows-unicode --disable-flac --disable-libcurl
make

Ready to go!

OK this should be all of it (thankfully), so you should be good to go.