Open main menu
ScummVM :: Wiki

TODO

Revision as of 23:39, 4 May 2006 by Fingolfin (talk | contribs) (→‎Code)

Here is a list of things we plan to do in the future. Note that we don't promise to do any of these, nor when we will do them. It's just a list of what we hope to be able to do one day.

If you want to dig in, this is the stuff where you might make the most useful contribution. Note that this list is never complete, and may be partially outdated, so just because you don't see something here doesn't mean it is not important.

Before you start work on something, you should first talk to the team! Ideally ask on scummvm-devel, our mailing list. This will help us to prevent double work, i.e. several people working on the same stuff at once without knowing about each other. Furthermore, sometimes entries on our list are actually obsolete (because the feature has been implemented, or because for some reason we no longer think it to be desirable). Special caution should be taken for TODO entries that say "we may want to" or similar things; that usually means that we aren't sure whether we really want to implement that feature.

So, to repeat it: Always talk to the team before implementing a change on this list, or else risk having your patch rejected :-/.

Finally, always make sure to check out our bug tracker and our feature request tracker for things that need work.


Docs, Web site

General

  • Add port specific user documentation (dreamcast/palm especially). That would include things like:
    • How to use ScummVM on system XYZ
    • Which Palm / WinCE devices will run ScummVM, which definitely will not run it (or with which limitations)?
  • Update/enhance man page
  • Write a high level overview of how ScummVM and its engines work?

README / Manual

  • Fingolfin has started a DocBook based manual (and FAQ, and Developer's Guide). You can find it in the SVN module "docs". It's a starting place, but very unfinished.
  • There is a LaTeX based version of the README in the "doc" subdir of the "scummvm" SVN module, but it tends to slip out of sync with the plain text README, and it's not really a manual, it's just the README in a different file format.
  • Everybody is welcome to start helping out with the public manual project in the "docs" SVN module. You can either reuse content from the README, or replace it with new, better written stuff. Contact Fingolfin or our mailing list, scummvm-devel, if you are interested in helping out.
  • Maybe move all/most of the compression related stuff from our README completely to the tools README, and only leave a pointer to that in the main README. This would be beneficial because this way, it's only documented in one place; it's *completly* documented (currently, the main README doesn't mention compress_scumm_bun, for example); and people who want to use the compression tools need to download the tools package anyway.
  • It would be greate to have a "Developer's Guide to ScummVM" which explains the ScummVM framework, and also the engines, i.e.
    • stuff in common/, like the config manager etc.
    • the backend API, and how to create new backends
    • the sound system
    • how to create a new engine
    • a chapter for each engine, with as many/little details as the resp. engine teams deem appropriate...
    • ...

LaTeX docs

  • These are constantly out of sync with the README :-/. Keep an eye on this and make sure that you always update both at once.

Code

  • Add more Doxygen comments. However, quality is preferable over quantity
  • Document the OSystem overlay API, it badly needs it...
  • Unify the copyright in the GPL headers in our sources. Currently, some list Ludvig's copyright for 2001, and "ScummVM project 2001-2006". Some others do not mention Ludvig, and say "2002-2006" for the "ScummVM project" copyright range. Some others may something different again. All should be changed to the form found in "base/main.h".
  • Note: Strictly spoken, none of these copyright strings has much of a meaning anyway, since (a) we never asked people to sign over their copyright to us, and (b) "ScummVM project" is not a proper legal entity...

Web site

  • Add the "Manual" / README to the site

Wiki

Forum

  • Implement the new layout (work in progress!)

Common code, infrastructure

General

  • Revise the way "quit" is handled. Maybe add a global variable "g_quit" which we set when the application should be quit (e.g. when an EVENT_QUIT is received). This is useful if multiple levels of event loops have to be ended
  • Make some generic "EventLoop" API/class which all backends and the GUI use. Initially this would just call the backend poll_event() etc. methods. But eventually the EventLoop object(s) could be made by the backend. This may allow for more efficient CPU usage etc. The current event handling model essentially is polling: the engines run some kind of main loop, which, besides many other things, also polls and dispatches events. The idea is to turn this around: the event loop frequently gives the engine time to do these "other things".
  • Maybe add ways to modify the game configs via the command line. E.g. allow
   ./scummvm --add new_target --path=/foo monkey2
   ./scummvm --remove new_target
  • Maybe allow launching games even if no target is specified? I.e. the user only has to specify a path (or run ScummVM from the right directory), and ScummVM auto-detects the game in that location
   ./scummvm --auto-detect
  • The following things should be put into namespaces:
    • MIDI related classes either to Audio, or a new "MIDI" namespace
    • backend specific stuff into ??? (maybe new namespace "Backends" ?) not sure about this one.
  • Get rid of getenv in as many places as possible. Ideally, we'd only use it to query HOME on Unix systems.

Build System

  • Add test(s) for backend usability in the configure script.
  • Allow automatic re-runs of configure (this would have to 'save' the values of env vars like CXXFLAGS and also command line params)
  • Add an install target to the Makefile - Copy binary, install manpage, add menu items, install README. See also patch #891909 (Gnome/KDE .desktop file)

Audio

  • Get the high quality resample code to work [Fingolfin has started work on this]
  • Consider changing the mixer volume to use range 0-255, for sake of consistency (but at a slight loss of efficiency). Note that this requires changes in at least rate.cpp and mixer.cpp.
  • MIDI: Add API to OSystem which allows client code to query for "native" MIDI drivers (like Windows, ALSA, Zodiac, CoreAudio). Then change the MIDI interfacing code (GUI, command line, config file, etc.) and also MidiDriver::createMidi() to use both that list and the list of 'emulated' MIDI devices (Adlib, MT-32, PC Speaker, etc.) in an appropriate way.
  • The Audio CD Manager, and especially the DigitalTrackInfo class could stand an overhaul. The system currently is not as easy to extend as one would wish. In particular, it would be nice if arbitrary AudioStream classes could be used here (this then would reduce code duplication and make it instantly possible to use WAV/VOC encoded audio tracks, should we desire to support those).
  • Modify our audio stream classes (for MP3/Vorbis/FLAC/... playback) to use SeekableReadStream instead of Files -> allow from-memory-playback. And could take advantage of a new hypothetical "Sub(Seekable)Stream" class. (See below for more info on that).
  • Make it possible to pass options to the midi/music drivers. This would allow us to get rid of the getenv hacks in the alsa & seq drivers.
    • A simple approach would be to allow the user to specify "extended" driver descriptions. E.g. "alsa:1234" could indicate the alsa driver with port 1234; alternatively, "alsa:port=1234".
    • This doesn't allow for easy tweaking of those settings via the GUI.... to achieve that, one approach would be to invent a 'parameter description language' which allows a driver to specify which options with which kind of values it supports... very flexible, but possibly overkill.
    • Instead, one could add a hook method to MIDI drivers that let's them add a few controls of their own to the options dialog. This is probably a lot easier to implement, though not quite as "clean"...
  • Some of our engines support the speech_mute / sfx_mute / music_mute options, but most don't. Almost all support the corresponding FOO_volume config keys. All engines use Mixer::setVolumeForSoundType to push those through to the mixer. I am wondering: Maybe it would make sense to remove Mixer::setVolumeForSoundType, and instead leave it up to the mixer to query the ConfigManager for the corresponding FOO_volume/_mute values? That way we'd ensure 100% identical behavior in all engines and actually simplify the code a bit... ? Not sure if this would work smoothly, it needs to be investigated.

Config Manager

  • Add a 'notification' system. E.g. the SoundMixer could request to be notified whenever the value of the "volume" config option changes. In other words, instead of a "pull" approach (where each subsystem has to check whether any config option relevant to it has been changed) we use a "push" approach. Of course the current approach is "push", too: whenever e.g. the volume setting is changed, the code doing so has to updated the SoundMixer etc. That's cumbersome, and error prone. Would be much nicer if updating the volume config value automatically notifies the SoundMixer, iMuse etc.
  • Modify the ConfigManager to make use of the ConfigFile class.
  • Maybe even follow the pentagram (http://pentragram.sf.net) approach and have three classes:
    • SettingsManager (like our current ConfigManager)
    • ConfigFileManager (manages a set of config files, possibly merging the data from multiple config files)
    • ConfigFile (a simple .ini file accessor).
    This makes it easy to add additional config sources (e.g. XMLConfigFile); makes it possible to treat the command line data like another config file (CommandLineConfig); and simply follows the good old MVC approach, which is always a good idea.

Files

  • Get rid of the incRef/decRef API of class File. Instead, add a clone() method which generates a new (independant) File object for the same file (only would work for files in read mode, obviously). Convert the audio code to use this instead of the ref counting.
    Reason: Using a shared file object can lead to race conditions if multiple threads try to use it at the same time; on some systems (Symbian) it is apparently not even possible to do it; iahd t can also cause problems even in non-threaded code, when we seek in one block of code, and then try to access it from another block, w/o reseeking first.
  • Currently, FilesystemNode's default constructor invokes AbstractFilesystemNode::getRoot. There is no specified way to obtain the "current" directory (and indeed, on some systems, that notion doesn't even make sense). Thing is, currently, the browser uses this as its default starting location, which may not always be optimal. Still, it might be useful to add a AbstractFilesystemNode::getDefaultDir() method or so (on systems w/o a "current directory", it could just call through to getRoot()).
  • Method names in FilesystemNode are inconsistent: Compare getParent, getChild to displayName(), path(), and once again to listDir, isValid, isDirectory (of course this "problem" affects all of ScummVM to a degree). This is a typical clash of the "verb-object, verb-adjective" pattern (getParent, getPath, isValid) vs. the "pure object/adjective" pattern (parent, path, valid).
  • Don't rely on the existence of SEEK_CUR, SEEK_END, SEEK_SET -- rather, define our own enum for this and convert all client code to use it.
  • Try to replace all usages of paths by FilesystemNode. In particular, Engine::_gameDataPath and File::addDefaultDirectory() will have to be adjusted. The idea behind this is to ease portability.
  • Consider removing write support from class File completely. After all, we do not support writing to data files on many platforms anyway. There are only three things for which we need writable files:
    1. Savegames -- but for those we already have the SavefileManage, so no problem
    2. Resources dumps -- useful for debugging. To support those, we could add a new DumpFile class, which simply does nothing on systems which don't support this
    3. Config file -- this one is the trickiest. The best approach is probably to make the actual reading/writing of the config file adjustable by the backend. This would also help to reduce the #ifdef hell in config-manager.cpp (see also the Modular Backends plans).

GUI

  • GUI TODO
  • EditableWidget: Make it possible to specify a min/max length for the text
  • EditableWidget: Let setEditString filter the string it gets
  • EditableWidget: Right now, custom filtering requires the user to subclass; it would be nice if there was simply a "validator hook" or so. Maybe take some inspiration from Java's Swing in this matter.
  • Improve EditTextWidget::drawCaret and ListWidget::drawCaret support for alternate fonts (the current code overdraws chars partly, and relies on the fact that our default built-in font has a separation pixel column on the *left* side; most other bitmap fonts have it on the right, though). To this end, we maybe should backup the background before drawing the caret, and restore it when erasing the caret.
  • PopUpDialog: Must be able to handle longer lists (by adding scrolling?). The language popup currently doesn't fit in the small version of the GUI.
  • Add a new "options" dialog which is used by all frontends: for this, we'd agree on a hotkey used in all engines to invoke that dialog; it would sport settings for the volume, graphics, paths, etc.; it would co-exist with the engines "native" option dialogs. The about dialog would be reachable from here, too, as well as a quit button. Justification: This ensures that all settings are really reachable from all of the engines, which is not the case currently. Problem: It's not fully clear to me how to "best" deal with global vs. local settings here...
  • Maybe add the ScummVM logo (+typeface?) to the about dialog
  • There is currently no way to unset the SoundFont from the GUI, if any was set. Maybe add a 'clear' button for it? The same holds for other path settings.
  • ScrollBarWidget: Add auto-repeat: if user clicks & holds on one of the arrows, then after a brief delay, it should start to contiously scroll.
  • AboutDialog: Add a "fade" effect for the top/bottom text lines
  • AboutDialog: Maybe prerender all of the text into another surface, and then simply compose that over the screen surface in the right way.
  • Add tab-focus support, i.e. make it at least possible to use the "tab" key (and also "shift-tab" to cycle through the edit fields.
  • Even nicer would be general "tab cycle" support, allowing tab to cycle the focus for all items where it makes sense (buttons, checkboxes, etc.), to make the GUI fully keyboard controllable
  • Launcher: When adding a new game, the list should automatically select & scroll into view the newly added item.

Graphics

  • Add some more fonts/font variants? Maybe a tool like ttf2bdf could be used to convert on (free!) TTF font to both a small and a big font for the GUI, maybe including bold/italic variants
  • Use 'complete' fonts, encoding wise. In particular, we should probably pick one encoding (e.g. ISO Latin 1) and standardize on it. Oh yeah, a map from the SCUMM encoding to that encoding would be useful. That way, we can at least all systems/languages which use that encoding. Of course, kyrillic and asian users, amongst others, wouldn't be helped by this, but there is nothing we can do for them anyway, short of implementing an UTF8 based font rendering engine. (And no, there is no way we are going to do such an absurd thing. Better to implement native GUIs than to write our own OS :-).
  • Consider implementing a new internal font format which
    • takes up less space in the executable (ascii vs. binary encoding)
    • allows for multi-color/anti-aliased fonts

Launcher

  • Add more options to global options dialog
  • Add more options to game target options dialog

Plugins

  • Add a plugin API that allows querying a plugin for the savegames associated with a given game; that is, you pass the name of a target from the config to the plugin, and it returns a list of savegames. How that list would look like exactly is debatable; but it should be possible to extract a user friendly name; a slot ID corresponding to the "-x" command line param; and possibly a filename. Justification: This API would make it possible to directly load savegames from the launcher.
    This savegame API could return additional (optional) information for each savegame entry: name; creation date; thumbnail screenshot
  • On OSX: Support a plugin build in the bundle target: *.plugin files should be put into ScummVM.app/Contents/PlugIns/; this also means that the loader needs to search in the plugin dir of the active bundle. So use the CF bundle API, inside a #ifdef MACOSX block.
  • Replace DetectedGame by a 'map' containing essentially the same data that the config file would contain -- i.e. gameid, description, language, platform; but also any further data, like e.g. basename, target_md5, or *anything* the engine deems important. -> far more flexible, and helps to simplify the launcher code, too.
  • Make DetectedGame::updateDesc a normal function, not a member function.
  • Allow static and dynamic plugins to be used at the same time. I.e. make it possible to build some plugins statically, and some dynamically.

Savegames

  • Make the autosave interval configurable (via GUI, command line, config file). Partially done via autosave_period config option.
  • Enhance SaveFileManager by adding an API that allows renaming / deleting savegames.
  • Added error return codes to openForSaving / openForLoading so that client code can nicely detect & report save/load failures ("media full", "file not found", "save path does not exist", "save path not writeable", etc.).
  • Try to get rid of getSavePath(): It is mostly used to print out more meaningful error messages about save failures. Instead of that, consider adding a getLastError() or so call, which return a string with additional information about the error. This is more portable, too.

  • Let me give a specific example on how error handling could look like:

ErrorCode err = saveMan->openForSaving(name, &myFile);
if (!err) {
 myFile->write(...);
 ...
 err = myFile->ioError();
}
switch (err) {
case kNoError:
  break;
case kMediaFullError:
  display("Writing your save game failed due to lack of space: %s", saveMan->getErrorString());
default:
  display("An error occured while writing a savegame: %s", saveMan->getErrorString());
}

As a slight variation, we could introduce an "error manager" which offers the "getErrorString" method and which could be used by more code. Compare also with SDL_SetError & SDL_GetError.

Streams

  • Add a Sub(Seekable)Stream wrapper class: You pass a (Seekable)Stream, an offset and a size to it. It will pass all calls on to the wrapped stream, but will restrict access to the specified byte range. This then can be used in various places, e.g. in many of the AudioStream classes, to simplify code.
  • Add a "clone" method that makes a copy of the (seekable/readable) stream. In the case of files, this would create a new file descriptor. Purpose: Replace the Symbian hack in MP3InputStream and other places; in particular, often we need two parts of code to access the same file but in separate positions...

Engines / frontends

General

  • Fix engines so they clean up after themselves, to allow proper re-entry to the launcher. See "FIXME: LAUNCHERHACK" in base/main.cpp.

SCUMM

  • Make it possible to restart games properly
  • Add method of setting initial debug channels from command-line
  • Possibly implement a new resource manager, which then also could be shared by ScummEX. [Jamieson has some ideas about this].
  • Figure out how to extract resources from Apple II versions
  • Figure out how to extract resources from Turbografx/PC Engine version of Loom
  • Loom EGA: Add support for music and sound effects in Macintosh version
  • Add support for handling Kanji in FM-Towns games (foreground is rendered on a second plane at 640x480), text uses Shift_JIS encoding [implementation now that currently depends on font rom, not needing the rom would be preferable]
  • Add support for TFMX music format in Amiga version of Monkey Island 1 Check http://darkstar.tabu.uni-bonn.de/~neo/audio.html for music format details
  • When SMUSH movies end, their music track sometimes should last a bit longer; currently, we stop the audio together with the animation, leading to cut off music.
  • Clean up class Gdi. This class right now mostly is about decoding various graphic formats. However some other functionality has crept into it, too. It would be nice if class Gdi would only contain the GFX decoding code, and nothing else (assuming that is feasible w/o too much trouble). OTOH, the code which is responsible for managing virtual screens, rendering virtual screens to the real display etc. could be grouped into a new class (e.g. VSManager or so).
  • Reduce kMD5FileSizeLimit from 1MB to e.g. 80 kb (this will force us to recompute the MD5 for the mac bundles, but hopefully nothing else)

SCUMM C64

SCUMM NES

HE games

Simon

Broken Sword 2

  • Enforce ScummVM Code Formatting Conventions. (Mostly done?)
  • Encapsulate the code into sensible objects. (Partly done.)
  • Enable the CD swapping code. (Partly done.)
  • Fix the credits so they look more like the original. (Did we ever get the source code for that?)
  • Maybe work around script bug which causes the mop to disappear briefly when trying to pick it up from the top of the boat at the London docks. (The event to hide the mop is sent too early.) See bug #1214168.
  • Unify some of the code with Broken Sword 1 (e.g. in router.cpp).

Gob

SAGA

Kyra

Cine

Backends

General

  • Add API to query backend for a list of available music engines. Useful for Options dialog
  • Document key codes to be used for special keys, like F1-F15 etc.
  • Right now gBitFormat is part of common/scaler.cpp; we might want to move it to common/system.cpp, or replace it with something better. No hasty changes here, please, make sure you understand how it is used right now before messing with it ;-)
  • OSystem::RGBToColor and OSystem::colorToRGB are very flexible, but cause a bottleneck: One doesn't want to use these virtual methods to convert a lot of colors in one go. Hence consider removing these and related function in favor of a new API with which client code can query the backend for a description of the pixel format (maybe similar in spirt to SDL_PixelFormat, but maybe we can also reuse / extend a variant of gBitFormat). This is in particular useful for the new GUI code which wants to do things like color fading. Of course, we must still accomodate for backends that only offer palette mode!

Potential ports

  • MS DOS port using Allegro and DJGPP ?
  • Intent port (already done by David Given, merge?)
  • Digita OS port? (play games on a select few digital cameras...)
  • NintendoDS port is in the works by Neil Millstone
  • XBox port(s) exist, but can not be legally distributed, since the use the XDK, which is incompatible with the GPL. OpenXDK lacks C++ support, though has SDL.

X11 backend

  • Add frills used by SDL backend like graphic filters usage and CD audio

SDL backend

  • Right now, the WinCE backend subclasses the regular SDL backend. The Symbian backend will do that, too (it is not yet in CVS, though). They both overload a lot of methods (mostly the graphics stuff). Since graphics.cpp uses the scalers (e.g. hq3x), these derived backends carry that baggage around, too, even though they don't need that code. Idea: split the SDL backend into two classes, one base class which only has the code which is used by all subclasses; and a "desktop" subclass, which implements the rest. Then WinCE/Symbian would only subclass the "base" SDL class.
  • We implemented GFX transactions & commits some time ago -- but they are only half the story. We are still missing a rollback system -- that is, check whether the requested video mode works, if it doesn't, revert to the current settings -- at least "if it makes sense". That is, if the transaction only modified the scaler or aspect ratio, we can safely revert. Of course if the screen size changed (e.g. from 320x200 -> 640x480) we can't just revert to the old screen size -- unless we augment the API accordingly, and update all engines to deal with this possibility.


Tools

General

  • Try to unify the usage of the compression tools, where possible / necessary.
  • Make compress_san use the common encoder "API" in compress.c
  • Make compress_queen use the common encoder "API" in compress.c
  • Add FLAC support to compress_sword1 (and the sword1 engine)
  • Consider using library APIs to encode data, instead of invoking the lame/oggenc/flac binaries.
    Pro
    Tighter integration, no need to create temporary files.
    Con
    Requires the resp. libs/headers to be compiled in, and the resulting binary would only run if all needed shared libs are present (unless we static link), whereas the current binary will work even if lame/oggenc/flac are missing

Descumm

  • Turn it into a library, to be used by a command line frontend (like now), ScummVM debugger, and ScummEX. Basically, the API could consist of a single function, which takes a pointer to a memory buffer, its length, the Scumm version and optionally a game id. Also, it would get a pointer to a print function (in the case of the CLI tool, print to stdout; for ScummVM, print to our GUI console; for ScummEX, append to some window/widget)
  • Rewrite code to use 2 passes; first pass builds an intermediate graph, the second pass then tries to detect loops, break/continue statements etc.
  • Proper implementation of o6_startObjectQuick decompilation (see comment in descumm6.c). May requre rewrite of core program logic
Retrieved from "https://wiki.scummvm.org/index.php?title=TODO&oldid=3483"